+ Post new Ad
Machinist Material Jack, US $840 – Picture 0
Machinist Material Jack, US $840 – Picture 0

Machinist Material Jack

US $840

  • Paris, Ohio, United States
  • Nov 17th
Open on mobile:
QR code
You are Bidding on a Machinist material Jack Well made I believe it's machinist made 4" to 7" range No makers mark Please Look closely at the photos. I describe the items I sell to the best of my knowledge. I try to research each Item so that I can Accurately describe it to you. In some cases there are items that have no makers marks or patent numbers, which make it very hard to research. Therefore, If i have misidentified an item your input would be greatly appreciated. See Pictures for other details Please read the descriptions carefully, If you have questions please ask as I do not take returns. Shipping Info: If you are the winning bidder, this  item will be shipped to the address verified by ebay. If you have moved please change your address before paying to avoid having your item shipped to the wrong address The cost of shipping is calculated by The United States Postal Service. I enter a weight and USPS calculates the cost by weight, package size and the distance it has to travel. I do combine ship on multiple items purchased I ship USPS Priority. Please note: Once an item leaves my facility I have no control over how long it takes to be delivered to you. Note to overseas bidders: I do not decide the cost of shipping over seas the United State Postal Service Does. In some cases, shipping items parcel post is not an option due to weight, Package size, or country of destination. So Please do not blame me for the high cost of over seas shipping. I Only Communicate in English

Directions

Similar products from Other Workholding Tools

Machinist Serrated Key Gripper 3/4 x 1/2" x 1/2" x 3/8" x 5/32 hole WORK-HOLDING

Machinist Serrated Key Gripper 3/4 x 1/2" x 1/2" x 3/8" x 5/32 hole WORK-HOLDING

  • Jeddo, Michigan, United States
  • Nov 18th
CHICK WORK HOLDING FOUNDATION TABLE 1016 x 482MM, 40" x 19" FREE SHIPPING

CHICK WORK HOLDING FOUNDATION TABLE 1016 x 482MM, 40" x 19" FREE SHIPPING

  • Broomfield, Colorado, United States
  • Nov 18th
1PC Machinist Hold Down Clamp Strap .548" Slot 7/8" Bottom Width 1/2"-13 Holes

1PC Machinist Hold Down Clamp Strap .548" Slot 7/8" Bottom Width 1/2"-13 Holes

  • Jeddo, Michigan, United States
  • Nov 18th
2pc FAIRLANE Carbide Angle Grippers 9/16" Wide 3/8" Tall .65" Long #10-32 Hole

2pc FAIRLANE Carbide Angle Grippers 9/16" Wide 3/8" Tall .65" Long #10-32 Hole

  • Jeddo, Michigan, United States
  • Nov 18th
Heavy Duty 100 mm / 4" Firm Joint Outside OD Calipers Hardened Steel Arms

Heavy Duty 100 mm / 4" Firm Joint Outside OD Calipers Hardened Steel Arms

  • DELHI, DELHI, India
  • Nov 18th
PHASE II 5C (225-205) COLLET INDEXER, HORIZONTAL/VERTICAL

PHASE II 5C (225-205) COLLET INDEXER, HORIZONTAL/VERTICAL

  • Toms River, New Jersey, United States
  • Nov 18th
STARRETT No. 289A: ATTACHMENT OFR COMBINATION SQUARES-RULES, VG. COND.

STARRETT No. 289A: ATTACHMENT OFR COMBINATION SQUARES-RULES, VG. COND.

  • Egg Harbor Township, New Jersey, United States
  • Nov 18th
2pc Machinist Hold Down Clamps Straps .540" Slot 7/8" Bottom Width 1/2"-13 Holes

2pc Machinist Hold Down Clamps Straps .540" Slot 7/8" Bottom Width 1/2"-13 Holes

  • Jeddo, Michigan, United States
  • Nov 17th
3pc FAIRLANE MACHINIST PIVOTING GRIPPER PAD 1" Diameter 1" Tall 5/8"-11 Thread

3pc FAIRLANE MACHINIST PIVOTING GRIPPER PAD 1" Diameter 1" Tall 5/8"-11 Thread

  • Jeddo, Michigan, United States
  • Nov 17th
3pc FAIRLANE ROUND PIVOTING GRIPPER PAD 11/16" Diameter 3/4" Tall 7/16-14 Thread

3pc FAIRLANE ROUND PIVOTING GRIPPER PAD 11/16" Diameter 3/4" Tall 7/16-14 Thread

  • Jeddo, Michigan, United States
  • Nov 17th
MACHINIST TOOLS LATHE MILL Machinist Ford Motor Co Pliers Plyers Model A T

MACHINIST TOOLS LATHE MILL Machinist Ford Motor Co Pliers Plyers Model A T

  • Morris Plains, New Jersey, United States
  • Nov 17th
lathe, grinder dogs

lathe, grinder dogs

  • Gloucester Point, Virginia, United States
  • Nov 17th
NOGA MAGNETIC HOLDER WITH LINE AND SHUTOFF VALVE

NOGA MAGNETIC HOLDER WITH LINE AND SHUTOFF VALVE

  • Mesa, Arizona, United States
  • Nov 17th
1/2Inch Thread, Split T Slot Nut

1/2Inch Thread, Split T Slot Nut

  • Auburndale, Florida, United States
  • Nov 17th
4pc FAIRLANE ROUND POSITIONING GRIPPER 1/2" DIAMETER 1/2" TALL #10-32 THREADS

4pc FAIRLANE ROUND POSITIONING GRIPPER 1/2" DIAMETER 1/2" TALL #10-32 THREADS

  • Jeddo, Michigan, United States
  • Nov 16th
5pc FAIRLANE Straight Angle Grippers 9/16" Wide 3/8" Tall .65" Long #10-32 Hole

5pc FAIRLANE Straight Angle Grippers 9/16" Wide 3/8" Tall .65" Long #10-32 Hole

  • Jeddo, Michigan, United States
  • Nov 16th
6pc FAIRLANE ROUND POSITIONING GRIPPER 1" DIAMETER 3/8" TALL 1/4"-32 THREADS

6pc FAIRLANE ROUND POSITIONING GRIPPER 1" DIAMETER 3/8" TALL 1/4"-32 THREADS

  • Jeddo, Michigan, United States
  • Nov 16th
7pc FAIRLANE ROUND CARBIDE TIPPED GRIPPER 1/2" DIA 1/2" TALL #10-32 THRD 4-Point

7pc FAIRLANE ROUND CARBIDE TIPPED GRIPPER 1/2" DIA 1/2" TALL #10-32 THRD 4-Point

  • Jeddo, Michigan, United States
  • Nov 16th
++ KURT MILLING VICE HANDLE 10" LONG 1" INNER DIAMETER (AA)

++ KURT MILLING VICE HANDLE 10" LONG 1" INNER DIAMETER (AA)

  • Bosque Farms, New Mexico, United States
  • Nov 16th
++ KURT MILLING VICE HANDLE 11.5" LONG 3/4" INNER DIAMETER 080-23A (BB)

++ KURT MILLING VICE HANDLE 11.5" LONG 3/4" INNER DIAMETER 080-23A (BB)

  • Bosque Farms, New Mexico, United States
  • Nov 16th

People who viewed this item also vieved

7-1/2" x 37" x 10" SET-UP-BLOCK - #26783

7-1/2" x 37" x 10" SET-UP-BLOCK - #26783

  • Cincinnati, Ohio, United States
  • Jan 30th
Jordan Tool- L-Blocks ALB051M Full Metric Hold Blocks

Jordan Tool- L-Blocks ALB051M Full Metric Hold Blocks

  • Waterford, Michigan, United States
  • Jan 30th
1-Press plate NC3383-34

1-Press plate NC3383-34

  • New Paris, Indiana, United States
  • Jan 30th
USED #7 BROWN & SHARPE B&S DEAD LATHE CENTER (.750" Point Diameter)

USED #7 BROWN & SHARPE B&S DEAD LATHE CENTER (.750" Point Diameter)

  • Fairfield, Iowa, United States
  • Jan 30th
Silver Tone Black Alloy MT2 Morse TaPer Lathes Dead Center SS

Silver Tone Black Alloy MT2 Morse TaPer Lathes Dead Center SS

  • Shenzhen, China
  • Jan 30th
#4 MORSE TAPER LIGHT DUTY LIVE CENTER

#4 MORSE TAPER LIGHT DUTY LIVE CENTER

  • Cadiz, Kentucky, United States
  • Jan 30th
TONGUE AND GROOVE T&G STEEL CHUCK JAWS , 4 HARD JAWS FOR 10" CHUCK

TONGUE AND GROOVE T&G STEEL CHUCK JAWS , 4 HARD JAWS FOR 10" CHUCK

  • Unionville, Connecticut, United States
  • Jan 30th
10" Hard Chuck Jaws Huron KT10RJ2S

10" Hard Chuck Jaws Huron KT10RJ2S

  • Unionville, Connecticut, United States
  • Jan 30th
6 5/8" chuck adapter plate cam-lock 3/4" locking pins

6 5/8" chuck adapter plate cam-lock 3/4" locking pins

  • Camano Island, Washington, United States
  • Jan 30th
ACA019, De-Sta-Co, Clamp Arm, New Old Stock

ACA019, De-Sta-Co, Clamp Arm, New Old Stock

  • Warren, Michigan, United States
  • Jan 30th
DE-STA-CO A895B-13R-22-R1000-C100K Pneumatic Clamp, With Arm, No Sensor, Used

DE-STA-CO A895B-13R-22-R1000-C100K Pneumatic Clamp, With Arm, No Sensor, Used

  • Warren, Michigan, United States
  • Jan 30th
UP TO 14 NEW STAINLESS STEEL CLAMPS

UP TO 14 NEW STAINLESS STEEL CLAMPS

  • Rochester, New York, United States
  • Jan 30th
Bison Collet Chuck ER-32 + Wrench Fits R8 Bridgeport

Bison Collet Chuck ER-32 + Wrench Fits R8 Bridgeport

  • Carrollton, Ohio, United States
  • Jan 30th
Lathe CNC Bar Puller Kit 11 Grippers (1/4" to 1 1/2 in 1/8" increments) plus 5/8

Lathe CNC Bar Puller Kit 11 Grippers (1/4" to 1 1/2 in 1/8" increments) plus 5/8

  • Columbus, Ohio, United States
  • Jan 30th
ERICKSON COLLET CHUCK

ERICKSON COLLET CHUCK

  • Odessa, Florida, United States
  • Jan 30th
(4) PIECE SET CINCINNATI MONOSET SERIES A COLLETS SIZES LISTED LOT C5041

(4) PIECE SET CINCINNATI MONOSET SERIES A COLLETS SIZES LISTED LOT C5041

  • Dayton, Ohio, United States
  • Jan 30th
(4) PIECE SET CINCINNATI MONOSET SERIES A COLLETS SIZES LISTED LOT C5038

(4) PIECE SET CINCINNATI MONOSET SERIES A COLLETS SIZES LISTED LOT C5038

  • Dayton, Ohio, United States
  • Jan 30th
(4) PIECE SET CINCINNATI MONOSET SERIES A COLLETS SIZES LISTED LOT C5030

(4) PIECE SET CINCINNATI MONOSET SERIES A COLLETS SIZES LISTED LOT C5030

  • Dayton, Ohio, United States
  • Jan 30th
Heavy Duty Lecount 1 1/2" Lathe Dog / JL 128

Heavy Duty Lecount 1 1/2" Lathe Dog / JL 128

  • Seffner, Florida, United States
  • Jan 30th
Aluminum Anodized Angle 3/4 x 3/4 x 48 in, 1/16 in thick, High Strength, .75,New

Aluminum Anodized Angle 3/4 x 3/4 x 48 in, 1/16 in thick, High Strength, .75,New

  • Old Fort, North Carolina, United States
  • Jan 30th
5C Collet Indexer with 5C Collets In Good Condition!

5C Collet Indexer with 5C Collets In Good Condition!

  • Plainville, Connecticut, United States
  • Jan 30th
CNC Tailstock Chuck 80mm for Rotary Axis, A Axis, 4th Axis, CNC Router Machine

CNC Tailstock Chuck 80mm for Rotary Axis, A Axis, 4th Axis, CNC Router Machine

  • Guangzhou, China
  • Jan 30th
8" Super Indexing Spacer with 8" Adjustable Chuck 0.0005" TIR,#SS-F3- NEW

8" Super Indexing Spacer with 8" Adjustable Chuck 0.0005" TIR,#SS-F3- NEW

  • Madison Heights, Michigan, United States
  • Jan 30th
6" HORIZONTAL & VERTICAL ROTARY TABLE, Part#TSL150- NEW

6" HORIZONTAL & VERTICAL ROTARY TABLE, Part#TSL150- NEW

  • Madison Heights, Michigan, United States
  • Jan 30th
Schunk Vise KSP Plus 64 Tandem Part# 0405100 Brand New

Schunk Vise KSP Plus 64 Tandem Part# 0405100 Brand New

  • Woodstock, Vermont, United States
  • Jan 30th
VTG MORGAN No. 25 SWIVEL BENCH VISE 4 1/2 INCH JAW Pipe Jaws

VTG MORGAN No. 25 SWIVEL BENCH VISE 4 1/2 INCH JAW Pipe Jaws

  • Flatwoods, Kentucky, United States
  • Jan 30th
Vintage Large Cast Iron Swivel Base Vise - 5" Jaw

Vintage Large Cast Iron Swivel Base Vise - 5" Jaw

  • Modesto, California, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies