+ Post new Ad
MACHINIST MILL X Y Table Milling Mill Machine Drill Press w/ tooling plate, US $495.00 – Picture 0
MACHINIST MILL X Y Table Milling Mill Machine Drill Press w/ tooling plate, US $495.00 – Picture 1
MACHINIST MILL X Y Table Milling Mill Machine Drill Press w/ tooling plate, US $495.00 – Picture 2
MACHINIST MILL X Y Table Milling Mill Machine Drill Press w/ tooling plate, US $495.00 – Picture 0
MACHINIST MILL X Y Table Milling Mill Machine Drill Press w/ tooling plate, US $495.00 – Picture 1
MACHINIST MILL X Y Table Milling Mill Machine Drill Press w/ tooling plate, US $495.00 – Picture 2

Machinist Mill X Y Table Milling Mill Machine Drill Press W/ Tooling Plate

US $495.00

  • Rochester, New York, United States
  • Jan 30th
Open on mobile:
QR code
Up for auction is a slightly used Mill/ Drill X Y table, the table measures 10" x 6" and has a 3 T-slots. Also included is an aluminum tooling plate for the table. The hole pattern is 3/4" x 3/4"(1/4-20 threaded holes). There is also a machined base plate on the bottom for easy use in a mill vise. The table has edge plates for part containment. This table seems tight and has little wear on the ways. This was part of an auction I won, and have not used it. The table is being sold as is, and no returns will be accepted. I will remove the handles for shipping, and secure it properly for transport. If you wish to pick it up locally, that will be fine. Otherwise it will ship UPS for a flat rate of $45.00 in the lower 48 states. Bid with confidence, check my feedbacks!!

Directions

Similar products from Fittings & Plates

39.5" x 19" T SLOTTED STEEL TABLE Cast Iron Coolant Type Layout Fixture Welding

39.5" x 19" T SLOTTED STEEL TABLE Cast Iron Coolant Type Layout Fixture Welding

  • Coopersville, Michigan, United States
  • Jan 30th
A1801 - Universal Angle Sine Plate, 7" x 7" Precision, Heavy Duty

A1801 - Universal Angle Sine Plate, 7" x 7" Precision, Heavy Duty

  • Ann Arbor, Michigan, United States
  • Jan 30th
DME 10 x 12 Double Unit Holder Aluminum Die Casting With Machine And Die Clamps

DME 10 x 12 Double Unit Holder Aluminum Die Casting With Machine And Die Clamps

  • Plantsville, Connecticut, United States
  • Jan 30th
5pc 5C HEX & SQUARE COLLET BLOCK SET & 17pc 5C COLLET SET 1/16-1" BY 16ths

5pc 5C HEX & SQUARE COLLET BLOCK SET & 17pc 5C COLLET SET 1/16-1" BY 16ths

  • Garden Grove, California, United States
  • Jan 30th
60" x 25" x 9" T-Slotted Table Cast Iron Steel Layout Welding _ A15016 _ A15017

60" x 25" x 9" T-Slotted Table Cast Iron Steel Layout Welding _ A15016 _ A15017

  • Grand Rapids, Michigan, United States
  • Jan 30th
MACHINIST TOOLS – 5” DIVIDING HEAD / DIVIDING PLATE (15-20) (1-1/4)

MACHINIST TOOLS – 5” DIVIDING HEAD / DIVIDING PLATE (15-20) (1-1/4)

  • Camarillo, California, United States
  • Jan 30th
MACHINIST TOOLS – 5” DIVIDING HEAD / DIVIDING PLATE (21,23,27,29,31,33) (1-1/4)

MACHINIST TOOLS – 5” DIVIDING HEAD / DIVIDING PLATE (21,23,27,29,31,33) (1-1/4)

  • Camarillo, California, United States
  • Jan 30th
MACHINIST TOOLS – 5” DIVIDING HEAD / DIVIDING PLATE (37,39,41,43,47,49 (1-1/4)

MACHINIST TOOLS – 5” DIVIDING HEAD / DIVIDING PLATE (37,39,41,43,47,49 (1-1/4)

  • Camarillo, California, United States
  • Jan 30th
Suburban Master grind very nice 5C lathe milling machine grinding

Suburban Master grind very nice 5C lathe milling machine grinding

  • Cave Creek, Arizona, United States
  • Jan 30th
de Whiton Machine Co 4" lathe chuck independent reversible 3 jaw.

de Whiton Machine Co 4" lathe chuck independent reversible 3 jaw.

  • Waterbury, Connecticut, United States
  • Jan 30th
Precision Right Angle Blocks

Precision Right Angle Blocks

  • Hayward, California, United States
  • Jan 30th
NOS Busch Precision USA 6"X6"X6" UNIVERSAL RIGHT ANGLE PLATE #2710 LIST $855

NOS Busch Precision USA 6"X6"X6" UNIVERSAL RIGHT ANGLE PLATE #2710 LIST $855

  • Perth, Ontario, Canada
  • Jan 30th
NOS Busch Precision USA 4"X4"X4" UNIVERSAL RIGHT ANGLE PLATE #PE2704G LIST $665

NOS Busch Precision USA 4"X4"X4" UNIVERSAL RIGHT ANGLE PLATE #PE2704G LIST $665

  • Perth, Ontario, Canada
  • Jan 30th
NOS Busch Precision USA 5"X4"X5.5" GROUND SLOTTED ANGLE PLATE #PE3505G LIST $685

NOS Busch Precision USA 5"X4"X5.5" GROUND SLOTTED ANGLE PLATE #PE3505G LIST $685

  • Perth, Ontario, Canada
  • Jan 30th
NOS Busch Precision USA 3.75"X4"X5" UNIVERSAL RIGHT ANGLE PLATE #PE2703G $620

NOS Busch Precision USA 3.75"X4"X5" UNIVERSAL RIGHT ANGLE PLATE #PE2703G $620

  • Perth, Ontario, Canada
  • Jan 30th
NOS Busch Precision USA 4"X3"X2.5" TOOLMAKERS KNEE RIGHT ANGLE Plate #2001 $550

NOS Busch Precision USA 4"X3"X2.5" TOOLMAKERS KNEE RIGHT ANGLE Plate #2001 $550

  • Perth, Ontario, Canada
  • Jan 30th
NOS Busch Precision USA 4.5"X4"X5" UNIVERSAL RIGHT ANGLE PLATE #PE2705G $755

NOS Busch Precision USA 4.5"X4"X5" UNIVERSAL RIGHT ANGLE PLATE #PE2705G $755

  • Perth, Ontario, Canada
  • Jan 30th
NOS Busch Precision USA 6"X6"X12" UNIVERSAL RIGHT ANGLE PLATE #2714 LIST $1200

NOS Busch Precision USA 6"X6"X12" UNIVERSAL RIGHT ANGLE PLATE #2714 LIST $1200

  • Perth, Ontario, Canada
  • Jan 30th
NOS Busch Precision USA Toolmakers 3"X5" CAST IRON SURFACE PLATE #PE100G $370

NOS Busch Precision USA Toolmakers 3"X5" CAST IRON SURFACE PLATE #PE100G $370

  • Perth, Ontario, Canada
  • Jan 30th
Precision Angle Plate 32" x 30-1/2" Mid-Staes Tombstone Cast Iron Angle Plate

Precision Angle Plate 32" x 30-1/2" Mid-Staes Tombstone Cast Iron Angle Plate

  • Ferris, Texas, United States
  • Jan 30th

People who viewed this item also vieved

SANDVIK TAP DRIVER COLLET 360206-17.45-687

SANDVIK TAP DRIVER COLLET 360206-17.45-687

  • Wadley, Alabama, United States
  • Mar 25th
JACOBS RUBBER FLEX LATHE COLLET SET 1/16-5/8

JACOBS RUBBER FLEX LATHE COLLET SET 1/16-5/8

  • United States
  • Mar 25th
SANDVIK TAP DRIVER COLLET 36207-17.78.700

SANDVIK TAP DRIVER COLLET 36207-17.78.700

  • Wadley, Alabama, United States
  • Mar 25th
Samsons Grip 408 Machinist "C" Clamps Pair of 8" Opening Forged Steel USA!

Samsons Grip 408 Machinist "C" Clamps Pair of 8" Opening Forged Steel USA!

  • Jamestown, New York, United States
  • May 14th
TEE SLOT NUTS, 1/2"-13 THREAD, USED IN GOOD CONDITION, 3.78 LBS.

TEE SLOT NUTS, 1/2"-13 THREAD, USED IN GOOD CONDITION, 3.78 LBS.

  • Portland, Oregon, United States
  • May 15th
TEE SLOT NUTS, 1/2"-13 THREAD, USED IN GOOD CONDITION, 3.52 LBS.

TEE SLOT NUTS, 1/2"-13 THREAD, USED IN GOOD CONDITION, 3.52 LBS.

  • Portland, Oregon, United States
  • May 15th
Kitagawa B208 8" CNC Lathe Chuck

Kitagawa B208 8" CNC Lathe Chuck

  • Chatsworth, California, United States
  • May 27th
GOOD USED 1/4" SQ ENGINE LATHE CHUCK KEY 6" T Handle ATLAS BUCK CRAFTSMAN UNION

GOOD USED 1/4" SQ ENGINE LATHE CHUCK KEY 6" T Handle ATLAS BUCK CRAFTSMAN UNION

  • Rushville, Indiana, United States
  • May 27th
Jacobs Spindle Nose Lathe Chuck D1-4 Mount (Inv.33322)

Jacobs Spindle Nose Lathe Chuck D1-4 Mount (Inv.33322)

  • Portland, Connecticut, United States
  • May 28th
Bridgeport Milling Vise With Jaws (Inv.33314)

Bridgeport Milling Vise With Jaws (Inv.33314)

  • Portland, Connecticut, United States
  • May 28th
WILTON MACHINIST BULLET VISE WITH SWIVEL BASE

WILTON MACHINIST BULLET VISE WITH SWIVEL BASE

  • United States
  • May 29th
ALUM VISE JAWS (6” KURT VISE) 6x3/4x1 3/4 (1 SET)

ALUM VISE JAWS (6” KURT VISE) 6x3/4x1 3/4 (1 SET)

  • Gilbertsville, Pennsylvania, United States
  • May 29th
ROYAL ROYAL Dead Center Carbide-Tipped Point POINT DIAMETER: 0.700''

ROYAL ROYAL Dead Center Carbide-Tipped Point POINT DIAMETER: 0.700''

  • Duncan, South Carolina, United States
  • May 24th
ROYAL Versa-Turn Live Center - Overall Length : 9-13/16'' Taper: 5 MT

ROYAL Versa-Turn Live Center - Overall Length : 9-13/16'' Taper: 5 MT

  • Duncan, South Carolina, United States
  • May 24th
SKODA Precision Heavy Duty Live Center - TAPER: 1 MT

SKODA Precision Heavy Duty Live Center - TAPER: 1 MT

  • Duncan, South Carolina, United States
  • May 24th
Tail Stock Tool & Cutter Cylindrical Grinder Table Center Adjustable Holder

Tail Stock Tool & Cutter Cylindrical Grinder Table Center Adjustable Holder

  • Waldo, Wisconsin, United States
  • May 31st
Kitagawa F1236HN28F Hydraulic Actuator Cylinder-REBUILT-with exchange-Miyano-CNC

Kitagawa F1236HN28F Hydraulic Actuator Cylinder-REBUILT-with exchange-Miyano-CNC

  • Lagrange, Ohio, United States
  • May 31st
10 Wedgelock Clecos Cylindrical Cleco Fastener with 0-1/2" Grip, CBX-BF-5/32

10 Wedgelock Clecos Cylindrical Cleco Fastener with 0-1/2" Grip, CBX-BF-5/32

  • Weatherford, Texas, United States
  • May 31st
4" HORIZONTAL & VERTICAL ROTARY TABLE PRIME QUALITY 4 INCH HV ROTARY TABLE

4" HORIZONTAL & VERTICAL ROTARY TABLE PRIME QUALITY 4 INCH HV ROTARY TABLE

  • Diamond Bar, California, United States
  • Jun 4th
Peiseler PT 160 Indexing Table w/ Tailstock, 4 x 90 degree, Mfg'd 1996, Used

Peiseler PT 160 Indexing Table w/ Tailstock, 4 x 90 degree, Mfg'd 1996, Used

  • Grand Rapids, Michigan, United States
  • Jun 4th
Index Indexer For Rotary Machining

Index Indexer For Rotary Machining

  • Archbold, Ohio, United States
  • Jun 4th
1.75” x 1.75” x 2” Vee Block

1.75” x 1.75” x 2” Vee Block

  • Euclid, Ohio, United States
  • Jun 4th
1.25” x 1.25” x 1.625” Vee Block

1.25” x 1.25” x 1.625” Vee Block

  • Euclid, Ohio, United States
  • Jun 4th
1.375” x 1.375” x 1.625” Vee Block

1.375” x 1.375” x 1.625” Vee Block

  • Euclid, Ohio, United States
  • Jun 4th
Lot Of 2 SANDVIK COROMANT C6-391.14-20 060 Collet Chuck Adapters

Lot Of 2 SANDVIK COROMANT C6-391.14-20 060 Collet Chuck Adapters

  • San Bernardino, California, United States
  • Jun 9th
ATS 3J Chuck

ATS 3J Chuck

  • Hendersonville, Tennessee, United States
  • Jun 9th
Techniks Cat/ER Collet Chuck, Model #SYIC-22255 N, Cat 40 x ER32-4", New!

Techniks Cat/ER Collet Chuck, Model #SYIC-22255 N, Cat 40 x ER32-4", New!

  • Osawatomie, Kansas, United States
  • Jun 9th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies