+ Post new Ad
Machinist Or Toolmakers Hardened Vise (1 1/2" Capacity), US $140 – Picture 0
Machinist Or Toolmakers Hardened Vise (1 1/2" Capacity), US $140 – Picture 1
Machinist Or Toolmakers Hardened Vise (1 1/2" Capacity), US $140 – Picture 2
Machinist Or Toolmakers Hardened Vise (1 1/2" Capacity), US $140 – Picture 3
Machinist Or Toolmakers Hardened Vise (1 1/2" Capacity), US $140 – Picture 0
Machinist Or Toolmakers Hardened Vise (1 1/2" Capacity), US $140 – Picture 1
Machinist Or Toolmakers Hardened Vise (1 1/2" Capacity), US $140 – Picture 2
Machinist Or Toolmakers Hardened Vise (1 1/2" Capacity), US $140 – Picture 3

Machinist Or Toolmakers Hardened Vise (1 1/2" Capacity)

US $140

  • Wheatland, Pennsylvania, United States
  • Jun 9th
Open on mobile:
QR code
 You are bidding on a machinist or toolmaker  hardened vise. It opens to 1 1/2" capacity, width of vise is 2 1/4" and depth is 15/32nds".  This is well made with a removable jaw plate on the fixed end held in with screws for the purpose of replacing if ever needed to. It is in good condition with a few tarnished areas due to age but no rust or damage. What a nice deal!!!   thanks for looking, I have other tools  in which I can ship more than one at a cheaper rate, so watch for my other tools. Email me if you have questions.

Directions

Similar products from Grips & Tongs

PanaVise 501, PanaPress 1/4 ton Arbor Press/NO RESERVE

PanaVise 501, PanaPress 1/4 ton Arbor Press/NO RESERVE

  • Tucson, Arizona, United States
  • Jun 9th
Drill press XY table

Drill press XY table

  • Katonah, New York, United States
  • Jun 9th
machine vise

machine vise

  • Katonah, New York, United States
  • Jun 9th
Columbian 4" Bench Vice No 04M2 Swivel 3 Screw Mount Base Anvil

Columbian 4" Bench Vice No 04M2 Swivel 3 Screw Mount Base Anvil

  • Spotswood, New Jersey, United States
  • Jun 9th
VICE Heavy Duty 4" Drill Press slotted base machine shop vice.

VICE Heavy Duty 4" Drill Press slotted base machine shop vice.

  • East Longmeadow, Massachusetts, United States
  • Jun 9th
Model 100 Cross Vise Machinist Drill Press 3.5" opening 3-way adjustment slides

Model 100 Cross Vise Machinist Drill Press 3.5" opening 3-way adjustment slides

  • Clare, Michigan, United States
  • Jun 9th
The Chas. Parker Co. 974 Meriden CT Bench Machinist Blacksmith Vice_Charles USA

The Chas. Parker Co. 974 Meriden CT Bench Machinist Blacksmith Vice_Charles USA

  • Le Roy, New York, United States
  • Jun 9th
Circuit Board Holder/Vise with Heavy Base

Circuit Board Holder/Vise with Heavy Base

  • Nipomo, California, United States
  • Jun 9th
SPI Magnetic Vice

SPI Magnetic Vice

  • Montebello, California, United States
  • Jun 9th
JAPAN ERON 3 " VISE

JAPAN ERON 3 " VISE

  • El Monte, California, United States
  • Jun 9th
Heinrich pneumatic 4" vise w/ micro adj ratchet

Heinrich pneumatic 4" vise w/ micro adj ratchet

  • Montebello, California, United States
  • Jun 9th
Chas Parker Vise No. 202 Replacement Part MAIN NUT Lead Screw Nut

Chas Parker Vise No. 202 Replacement Part MAIN NUT Lead Screw Nut

  • Maple Shade, New Jersey, United States
  • Jun 9th
MACHINIST TOOLS LATHE MILL Adjustable Angle 2 1/2" Mill Drill Grinding Vise w

MACHINIST TOOLS LATHE MILL Adjustable Angle 2 1/2" Mill Drill Grinding Vise w

  • Morris Plains, New Jersey, United States
  • Jun 9th
USA MADE 2 " PNEUMATIC VISE W/ FOOT PEDAL

USA MADE 2 " PNEUMATIC VISE W/ FOOT PEDAL

  • El Monte, California, United States
  • Jun 9th
B & S HS 5/8" x 4 5/8" Long 2 Fulte End Mill 218C20

B & S HS 5/8" x 4 5/8" Long 2 Fulte End Mill 218C20

  • Sacramento, California, United States
  • Jun 9th
Bora Drill Press Vise Bora 551027

Bora Drill Press Vise Bora 551027

  • Palmdale, California, United States
  • Jun 9th
B & S HSS 1/8" x 3 1/8" Long Corner Rounding End Mill

B & S HSS 1/8" x 3 1/8" Long Corner Rounding End Mill

  • Sacramento, California, United States
  • Jun 9th
Reed Model: R3 Yoke Style Pipe Vise, 1/8" to 4-1/2" Capacity

Reed Model: R3 Yoke Style Pipe Vise, 1/8" to 4-1/2" Capacity

  • Brush Prairie, Washington, United States
  • Jun 9th
Vintage Wilton Bullet Bench Vise 4" Jaws Swivel Base Machinist Mechanic NICE!!!!

Vintage Wilton Bullet Bench Vise 4" Jaws Swivel Base Machinist Mechanic NICE!!!!

  • Honeoye Falls, New York, United States
  • Jun 9th
Rare ATLAS Shaper Milling machine VISE USED M1-301 Machinist

Rare ATLAS Shaper Milling machine VISE USED M1-301 Machinist

  • Jonesville, South Carolina, United States
  • Jun 9th

People who viewed this item also vieved

V BLOCK WORKHOLDING TOOL poly or plastic w/ 1/2" bolt holes

V BLOCK WORKHOLDING TOOL poly or plastic w/ 1/2" bolt holes

  • Clatskanie, Oregon, United States
  • Jan 30th
Several Machinist Parallels

Several Machinist Parallels

  • Florence, Arizona, United States
  • Jan 30th
2- Northwestern # 2S Step Blocks G.C. See Desc.

2- Northwestern # 2S Step Blocks G.C. See Desc.

  • Rome, New York, United States
  • Jan 30th
TTC Bull Nose Live Center - Overall Length : 6.50" Taper: 3 MT

TTC Bull Nose Live Center - Overall Length : 6.50" Taper: 3 MT

  • Flushing, New York, United States
  • Jan 30th
ROYAL Quad-Bearing Live Center Point Length : 1-1/16" Overall Length : 6-7/16"

ROYAL Quad-Bearing Live Center Point Length : 1-1/16" Overall Length : 6-7/16"

  • Flushing, New York, United States
  • Jan 30th
ROYAL ROYAL Dead Center Half Carbide-Tipped POINT DIAMETER: 0.938"

ROYAL ROYAL Dead Center Half Carbide-Tipped POINT DIAMETER: 0.938"

  • Flushing, New York, United States
  • Jan 30th
SET OF 3 HURON SERRATED LATHE CHUCK SOFT JAWS 15-PEH (1/16" x 90° Serrations)

SET OF 3 HURON SERRATED LATHE CHUCK SOFT JAWS 15-PEH (1/16" x 90° Serrations)

  • Fairfield, Iowa, United States
  • Jan 30th
USED SET OF 3 REVERSIBLE LATHE CHUCK TONGUE & GROOVE HARD JAWS (2.20" Jaw Width)

USED SET OF 3 REVERSIBLE LATHE CHUCK TONGUE & GROOVE HARD JAWS (2.20" Jaw Width)

  • Fairfield, Iowa, United States
  • Jan 30th
SET OF 3 HURON SERRATED LATHE CHUCK HARD JAWS KT212RJ2S (1.5mm X 60° Serrations)

SET OF 3 HURON SERRATED LATHE CHUCK HARD JAWS KT212RJ2S (1.5mm X 60° Serrations)

  • Fairfield, Iowa, United States
  • Jan 30th
Brown & Sharp machinest clamp # 754-E 2 1/2"

Brown & Sharp machinest clamp # 754-E 2 1/2"

  • Dover, Pennsylvania, United States
  • Jan 30th
2 BROWN AND SHARPE 754-E-2 1/2 CLAMPS

2 BROWN AND SHARPE 754-E-2 1/2 CLAMPS

  • Michigan City, Indiana, United States
  • Jan 30th
2 DeStaco Horizontal Hold Down Toggle Locking Clamp 237 21A

2 DeStaco Horizontal Hold Down Toggle Locking Clamp 237 21A

  • Fountain Valley, California, United States
  • Jan 30th
DELTRONIC PINS .0488 to .0512

DELTRONIC PINS .0488 to .0512

  • West Point, Pennsylvania, United States
  • Jan 30th
Bolton Tools R8-ER40 Milling Lathe Machine Precision R8 Collet Chuck

Bolton Tools R8-ER40 Milling Lathe Machine Precision R8 Collet Chuck

  • Pomona, California, United States
  • Jan 30th
3/4 X 4 INCH ER-25 STRAIGHT SHANK COLLET CHUCK-PRO (3900-2092)

3/4 X 4 INCH ER-25 STRAIGHT SHANK COLLET CHUCK-PRO (3900-2092)

  • Chino, California, United States
  • Jan 30th
ER32 SPRING COLLET SET 18 PCS IN INCH SIZES CNC MILLING LATHE TOOL HOLDING #F63

ER32 SPRING COLLET SET 18 PCS IN INCH SIZES CNC MILLING LATHE TOOL HOLDING #F63

  • Hong Kong, Hong Kong
  • Jan 30th
METRIC MORSE TAPER 2 MT2 COLLETS (7 PCS) LATHE MILLING TOOL & WORKHOLDING #C94

METRIC MORSE TAPER 2 MT2 COLLETS (7 PCS) LATHE MILLING TOOL & WORKHOLDING #C94

  • Hong Kong, Hong Kong
  • Jan 30th
ER40 SPRING COLLET SET 24PC INCH SIZES CNC MILLING LATHE TOOL & WORKHOLDING F64

ER40 SPRING COLLET SET 24PC INCH SIZES CNC MILLING LATHE TOOL & WORKHOLDING F64

  • Hong Kong, Hong Kong
  • Jan 30th
BRAND NEW 5C ADJUSTABLE COLLET STOP

BRAND NEW 5C ADJUSTABLE COLLET STOP

  • Garden Grove, California, United States
  • Jan 30th
5C COLLET WRENCH AND 5C ADJUSTABLE COLLET STOP

5C COLLET WRENCH AND 5C ADJUSTABLE COLLET STOP

  • Garden Grove, California, United States
  • Jan 30th
5" 5C COLLET CHUCK WITH WRENCH AND 17pc 5C COLLET 1/8-1" BY 1/16th SET

5" 5C COLLET CHUCK WITH WRENCH AND 17pc 5C COLLET 1/8-1" BY 1/16th SET

  • Garden Grove, California, United States
  • Jan 30th
Unknown 6014 Sprocket 11/16" Bore - NEW

Unknown 6014 Sprocket 11/16" Bore - NEW

  • Bay City, Michigan, United States
  • Jan 30th
Unknown 60BTL14H Taper Lock Sprocket 1 7/8" to 1 3/4" Bore

Unknown 60BTL14H Taper Lock Sprocket 1 7/8" to 1 3/4" Bore

  • Bay City, Michigan, United States
  • Jan 30th
Dodge 60BTL14H Taper Lock Sprocket 1 7/8" to 1 3/4" Bore - NEW

Dodge 60BTL14H Taper Lock Sprocket 1 7/8" to 1 3/4" Bore - NEW

  • Bay City, Michigan, United States
  • Jan 30th
Rotary table 4" With Adjustable Height Tailstock

Rotary table 4" With Adjustable Height Tailstock

  • DELHI, DELHI, India
  • Jan 30th
8" rotary table

8" rotary table

  • Mullica Hill, New Jersey, United States
  • Jan 30th
YUASA CPDX-10nm CNC Rotary Indexer, 16" chuck, 3.5" thru, with CPNC-500 control.

YUASA CPDX-10nm CNC Rotary Indexer, 16" chuck, 3.5" thru, with CPNC-500 control.

  • Dearborn, Michigan, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies