+ Post new Ad
Machinist Parallels - Set Up Fixture - Used - Precision Ground - 3/4”x3-1/4”x8”, US $45.00 – Picture 0
Machinist Parallels - Set Up Fixture - Used - Precision Ground - 3/4”x3-1/4”x8”, US $45.00 – Picture 0

Machinist Parallels - Set Up Fixture - Used - Precision Ground - 3/4”x3-1/4”x8”

US $45.00

  • Naperville, Illinois, United States
  • Aug 4th
Open on mobile:
QR code
Machinist/tool maker Parallels used for setting up plates / blocks on a manual and/or CNC milling machine. This is a matching set, both were drilled out on a CNC to make them more ‘light-weight’, and both were precision ground simultaneously from hardened tool steel to ensure matching heights and thickness! Dimensions are : 3-1/4” tall x 3/4” thick x 8” long with (20) holes for weight reduction! Precision ground from hardened tool steel!! I personally used them to set up blocks on a Bridgeport manual mill, it kept my blocks about 1/4” off the bottom of my Kurt vise.. allowing me to drill through without drilling into the bottom of my vise while holding as much material as possible at the same time. Haven’t used them in about 2 years, Hope someone else can find use out of them Item is used, but in great condition! Willing to ship anywhere in the USA!!!
Condition:
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...
Block Material Hardened Steel
Block Type Precision Setup Block
Brand Unbranded
Featured Refinements Parallel Set
Shape Rectangular
UPC Does not apply

Directions

Similar products from Supporting Blocks & Sets

PLANER AND SHAPER GAGE (3402-0025)

PLANER AND SHAPER GAGE (3402-0025)

  • Chino, California, United States
  • Aug 5th
Large Vintage Machinist Setup Plate Fixturing Holder

Large Vintage Machinist Setup Plate Fixturing Holder

  • Seabrook, New Hampshire, United States
  • Aug 5th
3 X 1-5/16 X 2-3/8" STEEL V-BLOCK SET (3402-1303)

3 X 1-5/16 X 2-3/8" STEEL V-BLOCK SET (3402-1303)

  • Chino, California, United States
  • Aug 5th
Used Suburban USA 6" x 6" Precision V Block Machinist Fixture Grinding Milling

Used Suburban USA 6" x 6" Precision V Block Machinist Fixture Grinding Milling

  • Farwell, Michigan, United States
  • Aug 5th
MACHINIST TOOL LATHE MILL Challenge 5 X 8 X 4 1/2 Angle Block Fixture Basmt

MACHINIST TOOL LATHE MILL Challenge 5 X 8 X 4 1/2 Angle Block Fixture Basmt

  • Oxnard, California, United States
  • Aug 5th
2 Good Used 5" x 3" x 2.5" Machinist Metal Lathe Set up Angle Blocks

2 Good Used 5" x 3" x 2.5" Machinist Metal Lathe Set up Angle Blocks

  • Farwell, Michigan, United States
  • Aug 5th
2 Good Used Machinist Metal Lathe Set up V Blocks 1 Brown & Sharp 750-B

2 Good Used Machinist Metal Lathe Set up V Blocks 1 Brown & Sharp 750-B

  • Farwell, Michigan, United States
  • Aug 5th
Toolmakers Universal V-Block

Toolmakers Universal V-Block

  • Racine, Wisconsin, United States
  • Aug 5th
Steel machinist clamp and block 

Steel machinist clamp and block 

  • Philadelphia, Pennsylvania, United States
  • Aug 4th
NICE LOT OF OK TOOLS HOLD DOWN T-BOLTS & STUDS 3/4"-10 THREAD 6" TO 20" LENGTH

NICE LOT OF OK TOOLS HOLD DOWN T-BOLTS & STUDS 3/4"-10 THREAD 6" TO 20" LENGTH

  • Ellington, New York, United States
  • Aug 4th
Glass Pendent Lighting for Kitchen Island, Modern Farmhouse Glass Hanging

Glass Pendent Lighting for Kitchen Island, Modern Farmhouse Glass Hanging

  • Miami, Florida, United States
  • Aug 4th
3pc Heavy Duty Machinery Levelers Empco 1015-4 MACHINE WEDGE Style

3pc Heavy Duty Machinery Levelers Empco 1015-4 MACHINE WEDGE Style

  • Athens, Georgia, United States
  • Aug 4th
4pc Heavy Duty Machinery Levelers Empco 1015-4 MACHINE WEDGE Style

4pc Heavy Duty Machinery Levelers Empco 1015-4 MACHINE WEDGE Style

  • Bogart, Georgia, United States
  • Aug 4th
MACHINIST BLOCK/RIZER METAL

MACHINIST BLOCK/RIZER METAL

  • Greenfield, Tennessee, United States
  • Aug 4th
HEXAGONAL TOMBSTONE CNC MACHINE boring mill vise base riser work holding tool

HEXAGONAL TOMBSTONE CNC MACHINE boring mill vise base riser work holding tool

  • Milroy, Indiana, United States
  • Aug 4th
Magnetic V block 65 x 65 x50mm Both Side V high power- 1pc

Magnetic V block 65 x 65 x50mm Both Side V high power- 1pc

  • DELHI, DELHI, India
  • Aug 3rd
Precision Magnetic Engineers V block 2.5"- 65x65x50mm Workhold Premium vee block

Precision Magnetic Engineers V block 2.5"- 65x65x50mm Workhold Premium vee block

  • DELHI, DELHI, India
  • Aug 3rd
Precision Magnetic V block 2.5"- 65x65x50mm Workhold Premium vee block

Precision Magnetic V block 2.5"- 65x65x50mm Workhold Premium vee block

  • DELHI, DELHI, India
  • Aug 3rd
Precision Magnetic V block 65 x 65 x50mm Single Pc Both Side V (WOODEN BOX)

Precision Magnetic V block 65 x 65 x50mm Single Pc Both Side V (WOODEN BOX)

  • DELHI, DELHI, India
  • Aug 3rd
Precision Magnetic V block 65 x 65 x 50 mm-2.5 Inch Single pc Both Side V

Precision Magnetic V block 65 x 65 x 50 mm-2.5 Inch Single pc Both Side V

  • DELHI, DELHI, India
  • Aug 3rd

People who viewed this item also vieved

Skoda Precision Live Center

Skoda Precision Live Center

  • Springville, Tennessee, United States
  • Jan 30th
SFJ Swiss Precision #4 Morse Taper Live Center

SFJ Swiss Precision #4 Morse Taper Live Center

  • Johnson City, New York, United States
  • Jan 30th
SFJ Swiss Precision #4 Morse Taper Live Center #1872

SFJ Swiss Precision #4 Morse Taper Live Center #1872

  • Johnson City, New York, United States
  • Jan 30th
Bison 6" 16C CNC Lathes Power Collet Chuck -.0004" TIR

Bison 6" 16C CNC Lathes Power Collet Chuck -.0004" TIR

  • Hamden, Connecticut, United States
  • Jan 30th
Bison 5" 5C Power Collet Chuck for CNC Lathe-.0004" TIR

Bison 5" 5C Power Collet Chuck for CNC Lathe-.0004" TIR

  • Hamden, Connecticut, United States
  • Jan 30th
Cushman 18 inch 4 jaw chuck

Cushman 18 inch 4 jaw chuck

  • North Wilkesboro, North Carolina, United States
  • Jan 30th
MACHINIST PARALLEL VERY NICE SET AND MOORE JIG BORE TOOL

MACHINIST PARALLEL VERY NICE SET AND MOORE JIG BORE TOOL

  • Reynoldsburg, Ohio, United States
  • Jan 30th
C- Clamp

C- Clamp

  • Berlin, Wisconsin, United States
  • Jan 30th
MACHINIST PARALLEL S RARE NICE LATHE MILL TOOLMAKER

MACHINIST PARALLEL S RARE NICE LATHE MILL TOOLMAKER

  • Reynoldsburg, Ohio, United States
  • Jan 30th
2" Hardinge 5c Step Chuck

2" Hardinge 5c Step Chuck

  • Rochester, New York, United States
  • Jan 30th
3c DEAD LENGTH AIR COLLET CHUCK,COLLET CLOSER BY ARO.ROYAL,5c,HARDINGE,SOUTHBEND

3c DEAD LENGTH AIR COLLET CHUCK,COLLET CLOSER BY ARO.ROYAL,5c,HARDINGE,SOUTHBEND

  • Hancock, Wisconsin, United States
  • Jan 30th
ROHM COLLET CHUCK KZF-40 FITS Z 40 FLAT BACK MOUNT HARDINGE S-10 PADS OKUMA

ROHM COLLET CHUCK KZF-40 FITS Z 40 FLAT BACK MOUNT HARDINGE S-10 PADS OKUMA

  • Hancock, Wisconsin, United States
  • Jan 30th
(4) PIECE SET CINCINNATI MONOSET SERIES A COLLETS SIZES LISTED LOT C5045

(4) PIECE SET CINCINNATI MONOSET SERIES A COLLETS SIZES LISTED LOT C5045

  • Dayton, Ohio, United States
  • Jan 30th
(4) PIECE SET CINCINNATI MONOSET SERIES A COLLETS SIZES LISTED LOT C5031

(4) PIECE SET CINCINNATI MONOSET SERIES A COLLETS SIZES LISTED LOT C5031

  • Dayton, Ohio, United States
  • Jan 30th
(4) PIECE SET CINCINNATI MONOSET SERIES A COLLETS SIZES LISTED LOT C5032

(4) PIECE SET CINCINNATI MONOSET SERIES A COLLETS SIZES LISTED LOT C5032

  • Dayton, Ohio, United States
  • Jan 30th
HORZ/VERT 5C COLLET FIXTURE

HORZ/VERT 5C COLLET FIXTURE

  • Wadley, Alabama, United States
  • Jan 30th
ECONOMY SINE PLATE WITH MAGNETIC CHUCK JC-SP66M BY JEAN CHERNG

ECONOMY SINE PLATE WITH MAGNETIC CHUCK JC-SP66M BY JEAN CHERNG

  • Lansing, Illinois, United States
  • Jan 30th
DAVENPORT P/N # 13-17 [ NEW ] 5-PCS

DAVENPORT P/N # 13-17 [ NEW ] 5-PCS

  • Churchville, New York, United States
  • Jan 30th
1 5/8" Jaw Scrolling Tongs

1 5/8" Jaw Scrolling Tongs

  • Omaha, Nebraska, United States
  • Jan 30th
JET DD-30 Steel Drum Dolly, 30-gallon New

JET DD-30 Steel Drum Dolly, 30-gallon New

  • Royal Oak, Michigan, United States
  • Jan 30th
Set of 3 De Sta Co Hydra-Dyne Pumps - (2) 70122 & (1) 70120

Set of 3 De Sta Co Hydra-Dyne Pumps - (2) 70122 & (1) 70120

  • Royal Oak, Michigan, United States
  • Jan 30th
Nikken CNC-250FA Rotary Table Fanuc Servo A06B-0123-B077 chuck actuator tailstk

Nikken CNC-250FA Rotary Table Fanuc Servo A06B-0123-B077 chuck actuator tailstk

  • Novi, Michigan, United States
  • Jan 30th
Nikken CNC-200FA Rotary Table With Fanuc Servo A06B-0313-B031

Nikken CNC-200FA Rotary Table With Fanuc Servo A06B-0313-B031

  • Novi, Michigan, United States
  • Jan 30th
Tsudakoma 4th Axis Rotary Table

Tsudakoma 4th Axis Rotary Table

  • Indian Trail, North Carolina, United States
  • Jan 30th
Vintage Columbian No. 1035 Swivel Anvil Bench Vise

Vintage Columbian No. 1035 Swivel Anvil Bench Vise

  • Sioux City, Iowa, United States
  • Jan 30th
Precision Grinding Vice

Precision Grinding Vice

  • Kalamazoo, Michigan, United States
  • Jan 30th
NEW PANAVISE MODEL 380 VACUUM BASE

NEW PANAVISE MODEL 380 VACUUM BASE

  • Arlington Heights, Illinois, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies