magnet plate for sale, brand-new and used.

Description: Pickup Magnet, lifts 16 Lbs, 9" tall, 3 3/4" diameter. Use it remove the black sand from your gold pan. lifting the lever moves the magnet away from the bottom plate and drops the sand where you want it leaving only non-magnetic material (hopefully gold nuggets and flakes) in the pan

ASC365 Sealed Ink Cup Sealed ink cup systems employ a sealed container (ink cup), which acts as the ink supply, flood bar and doctor blade all in one. A ceramic circle with a highly polished working edge provides the seal against the printing plate. This ink cup is used with sealed ink cup pad printer.

ASC365 Sealed Ink Cup Sealed ink cup systems employ a sealed container (ink cup), which acts as the ink supply, flood bar and doctor blade all in one. A ceramic circle with a highly polished working edge provides the seal against the printing plate. This ink cup is used with sealed ink cup pad printer.

Hougen HMD904 115-Volt Magnetic DrillUSA MADE!BRAND NEW MODELFACTORY SEALED

HMD914 MAG DRILL - SWIVEL/COOLANT - 115V - 0914104USA MADE!BRAND NEW MODELFACTORY SEALED

var itemNumber = window.ebayItemID ?

This is a parts lot of Maytag parts, there's a caution plate that is cracked and partly broke along the bottom, a Gas Engine Special spark plug, there's a chip in the top part and the top is also a little loose, there's a Champion X Spark Plug, in bad shape, 2 oil catch rings, a flywheel magnet, a coil cap that is not in the best of shape, it has a dent, and also there are 3 segment gear guards, what you see in the picture is what's for sale, any questions just ask, thanks

All magnets we sell are N52 - strongest grade possible, and shipped from US. This auction is for N52 grade disk magnets Size: 1/4x1/4 inch Coating: Nickel Plating Quantity: 2 Strength (gauss): 6,619 Pull to steel plate (lb): 4.15 Pull between steel plates (lb): 4.77 Magnet to magnet (lb): 4.15 Maximum heat tolerance: 175 F. 80 C.

MAGNETIC STIRRER(With Hot Plate & Heavy Duty Permanent Magnet)

var itemNumber = window.ebayItemID ?

All magnets we sell are N52 - strongest grade possible, and shipped from US. This auction is for N52 grade block magnets Size: 30x5x2mm MAGNETIZED THROUGH THE 2MM SIDE Coating: Zinc Plating Quantity: 2 Strength (gauss): 3.230 Pull to steel plate (lb): 5.05 Pull between steel plates (lb): 22.71 Magnet to magnet (lb): 5.05 Maximum heat tolerance: 175 F. 80 C.

All magnets we sell are N52 - strongest grade possible, and shipped from US. This auction is for N52 grade block magnets Size: 12x6x2mm MAGNETIZED THROUGH THE 2MM SIDE Coating: Nickel Plating Quantity: 10 Strength (gauss): 3.114 Pull to steel plate (lb): 3.07 Pull between steel plates (lb): 11.08 Magnet to magnet (lb): 3.07 Maximum heat tolerance: 175 F. 80 C.

All magnets we sell are N52 - strongest grade possible, and shipped from US. This auction is for N52 grade block magnets Size: 10x5x5mm MAGNETIZED THROUGH THE 5MM SIDE Coating: Zinc Plating Quantity: 2 Strength (gauss): 5.884 Pull to steel plate (lb): 5.63 Pull between steel plates (lb): 8.07 Magnet to magnet (lb): 5.63 Maximum heat tolerance: 175 F. 80 C.

Neodymium Magnets 2" L x 2" W x 1/4" Thick Block N48 Rare Earth You are buying ONE lot of 1 Magnet. Size: 2 inch long x 2 inch wide x 1/4 inch thick Block Nickel (Ni) Plated (silver-like shine) Grade: N48 - Extremely powerful magnetic material Pull Force is approximately 55.2 pounds per piece against a 1" steel plate NEODYMIUM MAGNETS ARE NOT SAFE FOR CHILDREN These blocks are magne

All magnets we sell are N52 - strongest grade possible, and shipped from US. This auction is for N52 grade disk magnets Size: 1/2x1/4 inch Coating: Nickel Plating Quantity: 2 Strength (gauss): 5.233 Pull to steel plate (lb): 13.47 Pull between steel plates (lb): 20.06 Magnet to magnet (lb): 13.47 Maximum heat tolerance: 175 F. 80 C.

All magnets we sell are N52 - strongest grade possible, and shipped from US. This auction is for N52 grade disk magnets Size: 1/2x1/8 inch Coating: Nickel Plating Quantity: 2 Strength (gauss): 3,309 Pull to steel plate (lb): 7,97 Pull between steel plates (lb): 19,81 Magnet to magnet (lb): 7,97 Maximum heat tolerance: 175 F. 80 C.