magnetic v blocks for sale, brand-new and used.

These are six inches SPI matched magnetic v blocks that were used for inspection. The matched numbers are BCX15561R and BCX15562R. They are very heavy in excess of 35# each.

These are a matched set of magnetic v blocks they have been used and show wear and have had dings filed off. They are still very usable

Pair of magnetic vee chuck blocks useful for holding steel parts atop a magnetic chuck. Used but nice.

Micro Tools Magnetic Chuck "V" Blocks and Chuck Parallels In Wooden Boxes This is an excellent set of Micro Tools laminated magnetic chuck "V" blocks and magnetic laminated chuck parallels. Both very clean and great shape. Come in separate original wooden boxes.

these items look unused except there is a witness mark on both v blocks as why I marked as used Magnetic Chuck Parallels & Universal "V"BlockIncludes One Pair 1 1/16" x 1 15/16" x 4" micro parallels & 2 V-blocks: 1-7/8" x 2-3/8" x 1 15/16"

MAGNETIC V-BLOCKS & PLATES / Parallels Set MAGNETIC TRANSFER 2-“V” Blocks & 2 Parallels & Wood Storage Case.These Blocks are Made in USA by George Scherr Co. ,New York. USA.

SPI - V-Blocks Type: V-Block Overall Length (mm): 91.28 91-290- 7 SpecsV-Blocks; Type: V-Block; Overall Length (mm): 91.28; Overall Length (Inch): 3-19/32; Overall Width (mm): 47.63; Overall Width (Inch): 1-7/8; Overall Height (mm): 47.63 Type V-Block Overall Length (mm) 91.28 Overall Length (Inch) 3-19/32

I am selling these tools because I am out of the trade they are in good condition

***Toolmakers 4 pc Magnetic V-Block Set *** Welcome. This auction is for A set of Four Magnetic V Blocks. These are from the estate of a retired toolmaker and are in very good condition.

4"x 2" x 1" parallels. 4" x 2" x 2 12" V blocks. Tarnish, no pitting.

Features Blocks have four 3/8"-26 tapped holes, two in the base and one on each side for attachment to an angle iron. The angle iron holding the block can then be attached to a lathe faceplate or held by a magnetic chuck. Versatile tool for grinding, milling or drilling A clearance hole for drilling or removing dowel pins is provided in the block Block