+ Post new Ad
Metal Lathe Live Center, 5mt,5 morse taper,mt, tailstock spindle, US $750 – Picture 0
Metal Lathe Live Center, 5mt,5 morse taper,mt, tailstock spindle, US $750 – Picture 0

Metal Lathe Live Center, 5mt,5 Morse Taper,mt, Tailstock Spindle

US $750

  • Saint Louisville, Ohio, United States
  • Jun 23rd
Open on mobile:
QR code
     Hi, this is Don.  I just acquired this recently, too big for any of my machines.  I cannot find any ID markings, I think it had a label in between the knurls, could be an import.  This is well used, has dings and the tail portion shows cracks from work hardening from being knocked out of holders.  The 60 degree point is either replaced or resurfaced, and I think the bearings are new.  Very heavy, but I can get this inside a medium flat rate.      Questions are welcome, you can email or call 740 745 3334 anytime.  I will combine shipping for multiple items. Thank you very much for looking at my listing.

Directions

Similar products from Lathe Chucks

Gibraltar Manual Lathe Chuck 10" L-1 L1 Mount 3 Jaw Self Centering 2 Pc Jaws 3O

Gibraltar Manual Lathe Chuck 10" L-1 L1 Mount 3 Jaw Self Centering 2 Pc Jaws 3O

  • Saint Louis, Missouri, United States
  • Jun 23rd
SET OF ALUMINUM ENGINE GAP LATHE SOFT CHUCK JAWS 6-1/2" x 2-1/4" x 3"

SET OF ALUMINUM ENGINE GAP LATHE SOFT CHUCK JAWS 6-1/2" x 2-1/4" x 3"

  • La Puente, California, United States
  • Jun 23rd
N.O.S. Vintage Supreme Model 6T-33 0-1/2" No. 33 Taper Drill Chuck W Key NIB

N.O.S. Vintage Supreme Model 6T-33 0-1/2" No. 33 Taper Drill Chuck W Key NIB

  • Tiffin, Ohio, United States
  • Jun 23rd
8A250 Aluminum Soft Jaws Standard Tongue & Groove

8A250 Aluminum Soft Jaws Standard Tongue & Groove

  • Chino, California, United States
  • Jun 23rd
Hard Jaws F-2007 > Chucking

Hard Jaws F-2007 > Chucking

  • Chino, California, United States
  • Jun 23rd
MT2 SHANK 3 INCH 4-JAW SCROLL LATHE CHUCK (3900-4707)

MT2 SHANK 3 INCH 4-JAW SCROLL LATHE CHUCK (3900-4707)

  • Chino, California, United States
  • Jun 23rd
Hard Steel Jaws #274 > Chuck > Chucking

Hard Steel Jaws #274 > Chuck > Chucking

  • Chino, California, United States
  • Jun 23rd
Soft Jaws 2 Sets Steel One Set Aluminum > Chuck > Chucking

Soft Jaws 2 Sets Steel One Set Aluminum > Chuck > Chucking

  • Chino, California, United States
  • Jun 23rd
Hard Jaws Chuck for Internal & External Chucking

Hard Jaws Chuck for Internal & External Chucking

  • Chino, California, United States
  • Jun 23rd
Erickson Kennametal 1013410 CAT50 Taper Shank End Mill Holder

Erickson Kennametal 1013410 CAT50 Taper Shank End Mill Holder

  • Kansas City, Missouri, United States
  • Jun 23rd
Dillion KW6 Custom Serrated Lathe Chuck Soft Jaws 0.375" OD Radius Set of 3

Dillion KW6 Custom Serrated Lathe Chuck Soft Jaws 0.375" OD Radius Set of 3

  • Middlebury, Indiana, United States
  • Jun 22nd
Dillion KW6 Custom Serrated Lathe Chuck Soft Jaws 0.687" OD Radius Set of 3

Dillion KW6 Custom Serrated Lathe Chuck Soft Jaws 0.687" OD Radius Set of 3

  • Middlebury, Indiana, United States
  • Jun 22nd
Dillion KW6 Custom Serrated Lathe Chuck Soft Jaws 0.790" OD Radius Set of 3

Dillion KW6 Custom Serrated Lathe Chuck Soft Jaws 0.790" OD Radius Set of 3

  • Middlebury, Indiana, United States
  • Jun 22nd
Dillion KW6 Custom Serrated Lathe Chuck Soft Jaws 0.625" OD Radius Set of 3

Dillion KW6 Custom Serrated Lathe Chuck Soft Jaws 0.625" OD Radius Set of 3

  • Middlebury, Indiana, United States
  • Jun 22nd
Dillion KW6 Custom Serrated Lathe Chuck Soft Jaws 3.250" OD Radius Set of 3

Dillion KW6 Custom Serrated Lathe Chuck Soft Jaws 3.250" OD Radius Set of 3

  • Middlebury, Indiana, United States
  • Jun 22nd
Dillion KW6 Custom Serrated Lathe Chuck Soft Jaws 0.719" OD Radius Set of 3

Dillion KW6 Custom Serrated Lathe Chuck Soft Jaws 0.719" OD Radius Set of 3

  • Middlebury, Indiana, United States
  • Jun 22nd
Dillion KW6 Custom Serrated Lathe Chuck Soft Jaws 1.625" OD Radius Set of 3

Dillion KW6 Custom Serrated Lathe Chuck Soft Jaws 1.625" OD Radius Set of 3

  • Middlebury, Indiana, United States
  • Jun 22nd
Dillion KW6 Custom Serrated Lathe Chuck Soft Jaws 2" ID Radius Set of 3

Dillion KW6 Custom Serrated Lathe Chuck Soft Jaws 2" ID Radius Set of 3

  • Middlebury, Indiana, United States
  • Jun 22nd
Dillion KW4 Custom Serrated Lathe Chuck Soft Jaws 1" ID Radius Set of 3

Dillion KW4 Custom Serrated Lathe Chuck Soft Jaws 1" ID Radius Set of 3

  • Middlebury, Indiana, United States
  • Jun 22nd
Dillion KW4-2H Custom Serrated Lathe Chuck Soft Jaws 0.985" ID Radius Set of 3

Dillion KW4-2H Custom Serrated Lathe Chuck Soft Jaws 0.985" ID Radius Set of 3

  • Middlebury, Indiana, United States
  • Jun 22nd

People who viewed this item also vieved

2 Sets, Jergens 14942 Pointed Soft Jaws, 1.5mm x 60? Serrated, 10" Chuck - #0765

2 Sets, Jergens 14942 Pointed Soft Jaws, 1.5mm x 60? Serrated, 10" Chuck - #0765

  • Dundee, Florida, United States
  • Jan 30th
PAIR OF MAGNETIC PARALLEL BLOCKS STANDARD POLE TYPE

PAIR OF MAGNETIC PARALLEL BLOCKS STANDARD POLE TYPE

  • Ellington, New York, United States
  • Jan 30th
Precision Universal Block

Precision Universal Block

  • Brooklyn, New York, United States
  • Jan 30th
MT2 LIVE CENTER MORSE TAPER TRIPLE BEARING 2 MT .00039" NEW

MT2 LIVE CENTER MORSE TAPER TRIPLE BEARING 2 MT .00039" NEW

  • Troy, Michigan, United States
  • Jan 30th
Bison 5.9" / 150mm 3mt Universal Pip live center 8883-150

Bison 5.9" / 150mm 3mt Universal Pip live center 8883-150

  • Punta Gorda, Florida, United States
  • Jan 30th
Z LIVE CENTER 3" 3 Jaw Precision Self Centering Lathe Chuck with MT2 Shank

Z LIVE CENTER 3" 3 Jaw Precision Self Centering Lathe Chuck with MT2 Shank

  • Diamond Bar, California, United States
  • Jan 30th
Parallel Clamps, (2) Machinist / Tool Maker Parallel Clamps, Open to 3-1/4"

Parallel Clamps, (2) Machinist / Tool Maker Parallel Clamps, Open to 3-1/4"

  • Saunderstown, Rhode Island, United States
  • Jan 30th
LOT 89 NEW STRUT CLAMP CLIP STEEL 1-1/4IN STD 1-1/2IN TWC 1-5/8IN OD B360015

LOT 89 NEW STRUT CLAMP CLIP STEEL 1-1/4IN STD 1-1/2IN TWC 1-5/8IN OD B360015

  • Buffalo, New York, United States
  • Jan 30th
LOT 80 NEW STRUT CLAMP CLIP STEEL 1-1/4IN STD 1-1/2IN TWC 1-3/4IN OD B360011

LOT 80 NEW STRUT CLAMP CLIP STEEL 1-1/4IN STD 1-1/2IN TWC 1-3/4IN OD B360011

  • Buffalo, New York, United States
  • Jan 30th
NEW KENNAMETAL DA400 COLLET CHUCK NUT LNA404M

NEW KENNAMETAL DA400 COLLET CHUCK NUT LNA404M

  • Wadley, Alabama, United States
  • Jan 30th
Big New Baby Chuck Collet Holder CV40-NBS16-4

Big New Baby Chuck Collet Holder CV40-NBS16-4

  • Leesburg, Florida, United States
  • Jan 30th
Brown and Sharpe #7 ER32 Collet Chuck

Brown and Sharpe #7 ER32 Collet Chuck

  • Denton, Nebraska, United States
  • Jan 30th
South bend lathe 9" head stock cover set

South bend lathe 9" head stock cover set

  • Wappingers Falls, New York, United States
  • Jan 30th
South bend lathe 9" take up nut and thrust bearing

South bend lathe 9" take up nut and thrust bearing

  • Wappingers Falls, New York, United States
  • Jan 30th
South bend lathe 9" left side head stock covers

South bend lathe 9" left side head stock covers

  • Wappingers Falls, New York, United States
  • Jan 30th
HEAVY DUTY CAST IRON TAIL STOCK ADJUSTABLE CENTER HEIGHT 5-1/2"- 6-1/2"

HEAVY DUTY CAST IRON TAIL STOCK ADJUSTABLE CENTER HEIGHT 5-1/2"- 6-1/2"

  • Ellington, New York, United States
  • Jan 30th
LARGE RIGHT ANGLE PLATE 10 x 7 x 5.5 inches MACHINIST TOOLS 40 POUNDS *shlf

LARGE RIGHT ANGLE PLATE 10 x 7 x 5.5 inches MACHINIST TOOLS 40 POUNDS *shlf

  • Thomaston, Connecticut, United States
  • Jan 30th
HARDINGE HORIZONTAL / VERTICAL 5C INDEXING COLLET FIXTURE - HV-4N - MILL

HARDINGE HORIZONTAL / VERTICAL 5C INDEXING COLLET FIXTURE - HV-4N - MILL

  • Thomaston, Connecticut, United States
  • Jan 30th
Airetool Tube Cleaner Expander 4 Armed Swing w/ Universal Joint 3276 4300 2-1/4"

Airetool Tube Cleaner Expander 4 Armed Swing w/ Universal Joint 3276 4300 2-1/4"

  • Kennewick, Washington, United States
  • Jan 30th
NEW Vlier ESSP310S Leveling Mount Stud 3/4"-10x2" +Pad

NEW Vlier ESSP310S Leveling Mount Stud 3/4"-10x2" +Pad

  • Leander, Texas, United States
  • Jan 30th
NEW Applied AMAT 0040-45933 Ball Transfer Screw Assy

NEW Applied AMAT 0040-45933 Ball Transfer Screw Assy

  • Leander, Texas, United States
  • Jan 30th
New Mini Rotary Table 3" / 75mm Horizontal & Vertical Model - Milling Machine

New Mini Rotary Table 3" / 75mm Horizontal & Vertical Model - Milling Machine

  • DELHI, DELHI, India
  • Jan 30th
Yuasa 16" Vertical Horizontal Rotary Table NICE Condition

Yuasa 16" Vertical Horizontal Rotary Table NICE Condition

  • Edgewood, New Mexico, United States
  • Jan 30th
TROYKE 30" FULL 4 AXIS CNC VERT-HORZ MOUNT ROTARY TABLE WITH FANUC 20M SERVO

TROYKE 30" FULL 4 AXIS CNC VERT-HORZ MOUNT ROTARY TABLE WITH FANUC 20M SERVO

  • Modesto, California, United States
  • Jan 30th
Wilton Bullet Vise Swivel 3.5" Jaws Pipe Jaws Vintage Shop Tools Anvil 101166/67

Wilton Bullet Vise Swivel 3.5" Jaws Pipe Jaws Vintage Shop Tools Anvil 101166/67

  • Ocala, Florida, United States
  • Jan 30th
Small Brass Machinist Vise Clamp Tool ~ 7/8" Jaws Open To 3/4" ~ 4/0 1315

Small Brass Machinist Vise Clamp Tool ~ 7/8" Jaws Open To 3/4" ~ 4/0 1315

  • Fallbrook, California, United States
  • Jan 30th
Proxxon Precision Vise For MF 70 Micro Milling Jewelry Drill Press Table Clamp

Proxxon Precision Vise For MF 70 Micro Milling Jewelry Drill Press Table Clamp

  • San Jose, California, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies