Metals & Fusions (Manufacturing Equipment) for sale, page 148

Mic- 6 cast tooling aluminum plate 5pcs. x 1/2" x 5 1/4" x 5 1/4"

Philadelphia, Pennsylvania, United States
Jan 30th

5 pcs. of 0.500 thick aluminum tool and jig from Alcoa Shape: Plate Thickness: 0.500 inch Width: 5.25 inch Length: 5.25 inch Finish: Mill SAW cut TOL. + .065/ - .000

Bronze sheet metal 2 pieces 0.063" (1/16") thick 1piece 5" x 10.5" 1piece 6"x6"

South Jamesport, New York, United States
Jan 30th

2 PIECES OF 0.063" THICK (1/16") OF 220 BRONZE SHEET 1 PIECE 5" X 10-1/2" 1 PIECE 6-1/8" X 6-1/4" 2 PIECES WIEGH 1 POUND 13 OZ TOGETHER NEVER USED BUT THEY HAVE BEEN AROUND FOR A WHILE MAY HAVE LITE SCUFFS AND SOME LITE TARNISH SEE PICTURES

Sharpe 3hp 42"x9" table 5"quill milling machine great condition!

Watertown, Connecticut, United States
Jan 30th

Bridgeport series i 2hp 3ph 42"x 9" table 5" quill great condition!

Watertown, Connecticut, United States
Jan 30th

Aluminum rod 24" x 2" dia. 6061-t6511 temper-heat treated used

Palmyra, Virginia, United States
Jan 30th

Aluminum Rod 24" x 2" Dia. 6061-T6511 Temper-Heat Treated. Listed as used because one end has a threaded stud which has a thread depth of less than 1".

C360/360 brass flat/plate bar stock .5 "x 2"x 50.5

Fleetwood, Pennsylvania, United States
Jan 30th

Lot of 9 pieces of 304 stainless steel 3 7/8 x 9 15/16 inch or bigger

Mount Airy, Georgia, United States
Jan 30th

12 Guage (.109) thickness 304 Stainless Steel Buy one of these lots and you receive 9 pieces of 12 guage Stainless Steel 304 The package will be shipped within 24 hours of payment clearing or the next postal business day which ever is first. The measurements listed are of the smallest piece all 9 pieces will be that size or bi

80/20 inc 1.5cm x 1.5cm t-slot aluminum extrusions, 34 total, 4different lengths

San Diego, California, United States
Jan 30th

80/20 Inc 1.5cm x 1.5cm T-Slot Aluminum Extrusions. Lengths and quantity of each are as follows: ~ 60 cm - 4 extrusions total ~ 43 cm - 14 extrusions total ~ 31 cm - 8 extrusions total ~ 25 cm - 8 extrusions total Features one open T-slot on each of the four sides. Condition Lightly used in very good condition.

Lot of 10 pieces of 304 stainless steel 1 7/8 x 8 inch or bigger

Mount Airy, Georgia, United States
Jan 30th

12 Guage (.109) thickness 304 Stainless Steel Buy one of these lots and you receive 10 pieces of 12 guage Stainless Steel 304 The package will be shipped within 24 hours of payment clearing or the next postal business day which ever is first. The measurements listed are of the smallest piece all 10 pieces will be that size or

Scrap catalytic converter 12 lb

Dorchester, Wisconsin, United States
Jan 30th

Scrap Catalytic converter, approx. 12lbs. The straight section is 11" (from seam to seam) Full, no burnouts.

Lot of 8 pieces of 304 stainless steel 3 x 6 inch or bigger cutoffs

Mount Airy, Georgia, United States
Jan 30th

12 Guage (.109) thickness 304 Stainless Steel Buy one of these lots and you receive 8 pieces of 12 guage Stainless Steel 304 The package will be shipped within 24 hours of payment clearing or the next postal business day which ever is first. The measurements listed are of the smallest piece all 8 pieces will be that size or bi

C360/360 brass flat/plate bar stock .505 "x 1.5"x 47.25

Fleetwood, Pennsylvania, United States
Jan 30th

Aluminum bronze flat bar 2" x 1" x 8" ampco

Greenville, Mississippi, United States
Jan 30th

(1) piece C954 Aluminum Bronze Flat Bar - Machine Shop Stock1" wide x 2" thick x 8" long

Copper flat bar 2" x 1/4" x 8"

Greenville, Mississippi, United States
Jan 30th

(1) pieceCopper Flat Bar 2" x 1/4" x 8" - Machine Shop Stock2" wide x 1/4" thick x 8" longCut from bar stock

4150 maxel tool steel flat bar 3" x 3/4" x 8"

Greenville, Mississippi, United States
Jan 30th

(1) piece4150 Maxel Tool Steel Flat Bar - Machine Shop Stock3" wide x 3/4" thick x 8" long O/S

(2) pieces s7 tool steel flat ground bar 2" x 1/4" x 18"

Greenville, Mississippi, United States
Jan 30th

(2) piecesS7 Tool Steel Flat Ground Bar - Machine Shop Stock2" wide x 1/4" thick x 18"long36" total material length

Lot of 9 pieces 10 guage 409 stainless 2 15/16 x 7 15/16 inch or bigger cutoffs

Mount Airy, Georgia, United States
Jan 30th

10 Guage (.134 inch) thickness 409 Stainless Steel Buy one of these lots and you receive 9 pieces of 10 guage Stainless Steel 409 The package will be shipped within 24 hours of payment clearing or the next postal business day which ever is first. The measurements listed are of the smallest piece all 9 pieces will be that size

1lbs 10oz. carbide scrap

Elmira, Michigan, United States
Jan 30th

there is 1lbs 10oz. of clean carbide scrap here, although im not sure if the one arch shaped piece is carbide although it seems quite heavy and has blade like cut marks on it and i believe the one shorter piece is carbide tipped, it does appear to have some steal on it

A36 steel perforated sheet unpolished (mill) finish hot rolled staggered 0...

Summerville, South Carolina, United States
Jan 30th

The A36 carbon steel perforated sheet with staggered perforations meets American Society for Testing and Materials International ASTM A36 specifications, has an unpolished (mill) surface, and has been hot rolled. A36 carbon steel has low carbon content for good weldability and toughness, and bends to resist breakage under stress. The perforations are staggered in parallel diagonal rows.

Lot of 11 pieces 12 guage 409 stainless steel 1 7/8 x 12 inch or bigger cutoffs

Mount Airy, Georgia, United States
Jan 30th

12 Guage (.109 inch ) thickness 409 Stainless Steel Buy one of these lots and you receive 11 pieces of 12 guage Stainless Steel 409 The package will be shipped within 24 hours of payment clearing or the next postal business day which ever is first. The measurements listed are of the smallest piece all 9 pieces will be that siz