Metals & Fusions (Manufacturing Equipment) for sale, page 92

Spray on chrome double nozzle gun !!!!!!!!!!!!!!

Fort Myers, Florida, United States
Mar 8th

Check our Spray on chrome Chemicals Set, Covers about 133 sq. ft.$375.00 Value !!!!!

Induction coil straps - 4+ lbs solid copper for scrap

Bealeton, Virginia, United States
Mar 8th

new these cost about $40 each ! six heavy duty pure copper straps/bar drilled with 1/2" diameter holes designed to have induction coils mounted with them.varying lengths, 1/8" thick. excellent for making practically anything from jewelry to hinges.as shown they weigh over 4lbs.auction is for everything pictured, all six.

Titanim domeless nail with carb cap gr2 silicone jar and dabber

Jacksonville, Florida, United States
Mar 8th

Titanium Domeless Nail with Carb Cap Silicone Jar and Dabber Titanium Domeless Nail G2 Male or Female 14mm or 18mm Titanium Carb Cap G2 Silicone Jar Stainless Steel Dabber Titanium Advantage:

Scrap gold plated military cards recovery refine recycle bulk lots

Mapledale, NB, Canada
Mar 8th

you are bidding on this lot of 5 gold plated cards that were taken from satellite equipment that I part out for the aluminum. this was some large and complex military grade stuff...I have no idea what these were or what they were used for, however when I cut one up and soaked it in a nitric acid solution the gold plate on the outside flaked off and sank to the bottom of the container...so I know it's gold.

Tin ingots (3) 90 pounds pure form brazil mines

Holland, Michigan, United States
Mar 8th

3 ingots of pure Tin from brazil, Can't get my camera to work for a picture. approx. weight 90 pounds 2 ingots are 11 x 3 x 5 ingots imprinted with BRASIL MAMORE 1 ingot is 11 x 1 1/2 x 5 1/2.

1/4" .250 steel plate 8" x 8" square

Canfield, Ohio, United States
Mar 8th

2 x burns alloy 180 degree tubing bends

Cumming, Georgia, United States
Mar 8th

2 x new Burns alloy 180 degree tubing bends Burns Pt#: UB188-30-17-6061 Tubing OD; 1.88" Material: 6061 Wall thickness: 17 gauge Your bid buys both tubes

Oem 2008-10 ford 6.4l powerstroke dpf diesel particulate filter system and cat

Coal City, Illinois, United States
Mar 8th

OEM 2008-10 Ford 6.4L powerstroke DPF Diesel particulate filter system With Catalytic converter pulled off in good working condition replaced with delete and tune at 95k miles on system all sensors connected

Rare halcomb steel company syracuse, new york 1927

Elkhart, Indiana, United States
Mar 8th

Halcomb Steel Company Marathon for Long Runs 1927. Measurements: 4.5" by 7"

45" tray of 1.25 inch solid metal balls - old - smooth 2 crater surface

Smyrna, Georgia, United States
Mar 8th

THIS LISTING IS FOR ONE TRAY OF OLD SOLID METAL BALLS ... WITH SPECIALTY TRAY TRAY IS ALSO MADE OF METAL AND MEASURES 45 INCHES IN LENGTH ... 5.5 INCHES IN WIDTH ...

Scrap gold plated satelite cards recovery refine recycle bulk lots high grade

Mapledale, NB, Canada
Mar 8th

you are bidding on this lot of 5 gold plated cards that were taken from satellite equipment that I part out for the aluminum. this was some large and complex military grade stuff...I have no idea what these were or what they were used for, however when I cut one up and soaked it in a nitric acid solution the gold plate on the outside flaked off and sank to the bottom of the container...so I know it's gold.

Scrap copper wire (17.2 lbs)

North Platte, Nebraska, United States
Mar 8th

Scrap copper wire 17.2 lbs

Alumaloy .......... 20 rods

Greenwood, Indiana, United States
Mar 8th

TAKE ADVANTAGE OF OUR FREE SHIPPING TO US RESIDENTS!!!!! ALUMALOY as seen on TV and Youtube (www.youtube.com/watch?v=TZ5sD9hQTyw) Alumaloy

Copper/brass scrap lot 12lb total mostly bright wire

Virginia Beach, Virginia, United States
Mar 8th

Variety lot several pieces. Total weight 12lb. See pics.

Molybdenum *pure moly polished 3/16" dia rod 6-3/8 lg(.188" dia) made usa cheap!

New Haven, Connecticut, United States
Mar 8th

YOU ARE BIDDING ON ONE SOLID "PURE" MOLYBDENUM 3/16" DIAMETER ROD MEASURING .188" +/- .001" DIAMETER X 6.37" LONG ( OR LONGER ). APPROXIMATE DIMENSIONS IN FRACTION FORM: 3/16" DIAMETER X 6-3/8" LONG. THE OUTER DIAMETER HAS A SMOOTH POLISHED FINISH AS SHOWN IN PHOTO.

Ti 6al-4v alloy titanium round bar stock 2.75" x 48" (55) each certs included

Herriman, Utah, United States
Mar 8th

2.75"x48" round bar 55 each or 2640" total All certs can be emailed to you I just need your email address. I also have an audit that was done verifying the amounts. Local Utah Quote I just got was $61,000 for the 2.75" This was originally purchased in 2010/2011 and we have figured out we have no need for this material.

8020 t slot corner gusset 8 hole 10 series 4138 pkg 4 new

Laurel, Maryland, United States
Mar 8th

8020 T SLOT CORNER GUSSET 10 SERIES (INCH) PART NUMBER 4138 ANODIZED ALUMINUM. You get an original sealed pack of four new 80/20 one inch size 8 hole corner gussets, has part number label on package as shown. For technical specs please refer to manufacturer and use item number for reference.