+ Post new Ad
MHC - Setup Blocks Type: 1-2-3 Block Overall Width 1 ", US $15.00 – Picture 0
MHC - Setup Blocks Type: 1-2-3 Block Overall Width 1 ", US $15.00 – Picture 1
MHC - Setup Blocks Type: 1-2-3 Block Overall Width 1 ", US $15.00 – Picture 0
MHC - Setup Blocks Type: 1-2-3 Block Overall Width 1 ", US $15.00 – Picture 1

Mhc - Setup Blocks Type: 1-2-3 Block Overall Width 1 "

US $15.00

  • New Bedford, Massachusetts, United States
  • Feb 25th
Open on mobile:
QR code
 MHC - Setup Blocks Type: 1-2-3 Block Overall Width  1 " Specs Setup Blocks; Type: 1-2-3 Block; Overall Width (Inch): 1; Overall Length (Inch): 2; Overall Height (Inch): 3; Squareness Per 1 Inch (Decimal Inch): 0.0003; Overall Tolerance (Decimal Inch): 0.0001 to 0.0007 Type 1-2-3 Block Overall Width (Inch) 1 Overall Length (Inch) 2 Overall Height (Inch) 3 Squareness Per 1 Inch (Decimal Inch) 0.0003 Overall Tolerance (Decimal Inch) 0.0001 to 0.0007 Number of Holes 23 Number of Tapped Holes 5 Number of Untapped Holes 18 Tapped Hole Size (Inch) 3/8-16 Hardness 56-60 HRC Material Hardened Steel Sold As Matched Pair Additional Information Layout Work; Precision Grounding
“NEW WITH RUST CHECK THE PHOTOS”
Manufacturer MHC
Model MHC 23 HOLES
Country/Region of Manufacture China
MPN 06378012
Brand MHC

Directions

Similar products from Supporting Blocks & Sets

Starrett 3 V Blocks & 2 Clamps Set # 268 Good shape

Starrett 3 V Blocks & 2 Clamps Set # 268 Good shape

  • Dayton, Ohio, United States
  • Feb 27th
Machinist Tool: 5C Collet Block Set, Square & Hex

Machinist Tool: 5C Collet Block Set, Square & Hex

  • Tewksbury, Massachusetts, United States
  • Feb 27th
MACHINIST LATHE MILL Machinist 2 Lufkin Hold Down Parallel Block s

MACHINIST LATHE MILL Machinist 2 Lufkin Hold Down Parallel Block s

  • Morris Plains, New Jersey, United States
  • Feb 27th
STARRETT OFFSET V-BLOCK #567 MACHINIST-TOOLMAKER, INSPECTION, MILLING, GRINDING

STARRETT OFFSET V-BLOCK #567 MACHINIST-TOOLMAKER, INSPECTION, MILLING, GRINDING

  • Lodi, New Jersey, United States
  • Feb 27th
Tietzmann #1 Ball Bearing Parallel Set of 4

Tietzmann #1 Ball Bearing Parallel Set of 4

  • Belleville, Michigan, United States
  • Feb 25th
MACHINIST PARALLEL BLOCKS - BRIDGEPORT - INSPECTION 1-45 ANGLE & 10 PAIRS + 1

MACHINIST PARALLEL BLOCKS - BRIDGEPORT - INSPECTION 1-45 ANGLE & 10 PAIRS + 1

  • Roscommon, Michigan, United States
  • Feb 25th
MACHINIST LATHE MILL 2 Machinist Adjustable Milling Table Hold Down Clamps

MACHINIST LATHE MILL 2 Machinist Adjustable Milling Table Hold Down Clamps

  • Morris Plains, New Jersey, United States
  • Feb 25th
MACHINIST LATHE MILL Machinist Lot of Brass Chuck Tool Holders Cutter Parts Etc

MACHINIST LATHE MILL Machinist Lot of Brass Chuck Tool Holders Cutter Parts Etc

  • Morris Plains, New Jersey, United States
  • Feb 25th
MACHINIST LATHE MILL Machinist Lot Starrett Gages Cutters Hold Downs Parts Etc

MACHINIST LATHE MILL Machinist Lot Starrett Gages Cutters Hold Downs Parts Etc

  • Morris Plains, New Jersey, United States
  • Feb 25th
Vintage L.S.Starrett #161 B Machinist Parallel Clamps, Set of 2

Vintage L.S.Starrett #161 B Machinist Parallel Clamps, Set of 2

  • Sycamore, Illinois, United States
  • Feb 25th
Starrett V Blocks No. 268, 271, Pin Vices & Parallel Clamps

Starrett V Blocks No. 268, 271, Pin Vices & Parallel Clamps

  • Indio, California, United States
  • Feb 25th
STARRETT V-BLOCKS 271c 1 CLAMP 0069 USA MADE MACHINIST TOOLMAKER MILL HARDENED

STARRETT V-BLOCKS 271c 1 CLAMP 0069 USA MADE MACHINIST TOOLMAKER MILL HARDENED

  • Lewistown, Pennsylvania, United States
  • Feb 25th
Brown And Sharpe 0 To 60 Degree Precision Angle Block 38n972

Brown And Sharpe 0 To 60 Degree Precision Angle Block 38n972

  • Jonesboro, Arkansas, United States
  • Feb 25th
Used TAFT PEIRCE 9130 No. 39P Machinists V Block And Clamp Inspection Tool

Used TAFT PEIRCE 9130 No. 39P Machinists V Block And Clamp Inspection Tool

  • United States
  • Feb 25th
Used Machinist tools sine block spacers elco clamp parallel Doall Weber Starrett

Used Machinist tools sine block spacers elco clamp parallel Doall Weber Starrett

  • Elgin, Illinois, United States
  • Feb 25th
PAIR OF MILLING SET UP BLOCKS

PAIR OF MILLING SET UP BLOCKS

  • Franklin Park, Illinois, United States
  • Feb 25th
V Block, Brown & Sharpe No. 750-B Machinist Inspection V Block, USA

V Block, Brown & Sharpe No. 750-B Machinist Inspection V Block, USA

  • Saunderstown, Rhode Island, United States
  • Feb 25th
L.S. STARRETT CO.~Set of 3 V-BLOCKS No. 271, 3 CLAMPS, & ALIGNING ROD Nice

L.S. STARRETT CO.~Set of 3 V-BLOCKS No. 271, 3 CLAMPS, & ALIGNING ROD Nice

  • Dayton, Ohio, United States
  • Feb 25th
MAGNETIC CHUCK V BLOCKS AND PARALLEL BLOCKS 2 STARRETT PARALLELS For Grinder

MAGNETIC CHUCK V BLOCKS AND PARALLEL BLOCKS 2 STARRETT PARALLELS For Grinder

  • Milwaukee, Wisconsin, United States
  • Feb 25th
MACHINIST LATHE MILL Machinist Lot Pillow Block Pedal Round Stock Part Chuck Etc

MACHINIST LATHE MILL Machinist Lot Pillow Block Pedal Round Stock Part Chuck Etc

  • Morris Plains, New Jersey, United States
  • Feb 25th

People who viewed this item also vieved

Lot of 3 R8 Collets all 1/8" similar to Shar, hardinge, or Lyndex collets R#0196

Lot of 3 R8 Collets all 1/8" similar to Shar, hardinge, or Lyndex collets R#0196

  • Dayton, Ohio, United States
  • Mar 8th
Lot of 4 R8 Collets from 1/8" to 7/16" similar to Shar hardinge or Lyndex R#0197

Lot of 4 R8 Collets from 1/8" to 7/16" similar to Shar hardinge or Lyndex R#0197

  • Dayton, Ohio, United States
  • Mar 8th
Lot of 5 R8 Collet from 1/8" to 11/16" similar to Shar hardinge or Lyndex R#0199

Lot of 5 R8 Collet from 1/8" to 11/16" similar to Shar hardinge or Lyndex R#0199

  • Dayton, Ohio, United States
  • Mar 8th
2 VISE GRIP IRWIN WELDING PLIERS 9R LOCKING CLAMP 9" NEW

2 VISE GRIP IRWIN WELDING PLIERS 9R LOCKING CLAMP 9" NEW

  • Westerville, Ohio, United States
  • Mar 11th
Lot of 2 C Clamps - 5" Havens Steele, Kansas City & 4" Blue Clamp

Lot of 2 C Clamps - 5" Havens Steele, Kansas City & 4" Blue Clamp

  • Springfield, Missouri, United States
  • Mar 11th
Cant clamps

Cant clamps

  • Buffalo, Minnesota, United States
  • Mar 11th
MACHINIST LATHE MILL Ground & Hardened Tool Makers Hold Down Fixture Plate

MACHINIST LATHE MILL Ground & Hardened Tool Makers Hold Down Fixture Plate

  • Morris Plains, New Jersey, United States
  • Mar 11th
Angle plate 5" x 4" x 8"

Angle plate 5" x 4" x 8"

  • Montebello, California, United States
  • Mar 11th
4-3/4" Angle Plate

4-3/4" Angle Plate

  • Garden City, Idaho, United States
  • Mar 11th
Engine Lathe 4 Jaw Chuck 15 3/4 ” OD x 3 7/8” ID A1-11” Mount

Engine Lathe 4 Jaw Chuck 15 3/4 ” OD x 3 7/8” ID A1-11” Mount

  • Lake Saint Louis, Missouri, United States
  • Mar 12th
Engine Lathe 4 Jaw Chuck 18” Dia. x 5” ID A1-15” Mount

Engine Lathe 4 Jaw Chuck 18” Dia. x 5” ID A1-15” Mount

  • Lake Saint Louis, Missouri, United States
  • Mar 12th
Engine Lathe 4 Jaw Chuck 15 1/2 ” OD x 3 7/8” ID A1-11” Mount

Engine Lathe 4 Jaw Chuck 15 1/2 ” OD x 3 7/8” ID A1-11” Mount

  • Lake Saint Louis, Missouri, United States
  • Mar 12th
10 pcs precision angle block set 1 to 5 degree & 5 to 30 degree

10 pcs precision angle block set 1 to 5 degree & 5 to 30 degree

  • Boston, Massachusetts, United States
  • Mar 12th
VINTAGE MACHINIST VICE

VINTAGE MACHINIST VICE

  • Middletown, Ohio, United States
  • Mar 12th
Swivel Base for Machinery Vise Fits Kurt D60 Nice Shape No Resv.

Swivel Base for Machinery Vise Fits Kurt D60 Nice Shape No Resv.

  • Staten Island, New York, United States
  • Mar 12th
Carbide Tipped MT4 Dead Center Nice Shape!

Carbide Tipped MT4 Dead Center Nice Shape!

  • Victoria, British Columbia, Canada
  • Jun 1st
SOUTH BEND ATLAS ROCKWELL 6" FACEPLATE 1-1/2"-8 9" & 10K LATHE DOUBLE DOG PLATE

SOUTH BEND ATLAS ROCKWELL 6" FACEPLATE 1-1/2"-8 9" & 10K LATHE DOUBLE DOG PLATE

  • Decatur, Illinois, United States
  • Jun 1st
NEIDLEIN BULL NOSE CARBIDE DEAD CENTER 30-50MM MT3

NEIDLEIN BULL NOSE CARBIDE DEAD CENTER 30-50MM MT3

  • Happy Valley, Oregon, United States
  • Jun 2nd
MACHINIST TOOLS LATHE MILL Machinist 2 Screw Jacks for Set Up

MACHINIST TOOLS LATHE MILL Machinist 2 Screw Jacks for Set Up

  • Morris Plains, New Jersey, United States
  • May 28th
Suburban Tool 6" x 6" x 4" Hardened Steel Precision V-Block With Clamp

Suburban Tool 6" x 6" x 4" Hardened Steel Precision V-Block With Clamp

  • Charlotte, North Carolina, United States
  • May 28th
0 - 600mm Double Beam Height Gage with Counter

0 - 600mm Double Beam Height Gage with Counter

  • South Hackensack, New Jersey, United States
  • May 28th
TSUDAKOMA RZ160 INDEXER, ROTARY TABLE, WITH CONTROL TPC JR

TSUDAKOMA RZ160 INDEXER, ROTARY TABLE, WITH CONTROL TPC JR

  • Aurora, Illinois, United States
  • Jun 1st
ERON No. 308 CROSSLIDE ROTARY TABLE 8INCH DIAMETER

ERON No. 308 CROSSLIDE ROTARY TABLE 8INCH DIAMETER

  • Quebec, Quebec, Canada
  • Jun 1st
SMW RT 160 PY Rotary Indexer CNC 4th Axis Rotary Table

SMW RT 160 PY Rotary Indexer CNC 4th Axis Rotary Table

  • Vancouver, Washington, United States
  • Jun 1st
Techniks SYIC-29026 CAT/SFC Shrink Fit Chuck

Techniks SYIC-29026 CAT/SFC Shrink Fit Chuck

  • Kansas City, Missouri, United States
  • Jun 7th
LEXAIR 5C COLLET AIR OPERATED CLAMPING FIXTURE BLOCK MODEL 65101 150 PSI RATED

LEXAIR 5C COLLET AIR OPERATED CLAMPING FIXTURE BLOCK MODEL 65101 150 PSI RATED

  • Andover, Ohio, United States
  • Jun 7th
Sizzix Textured Impressions Plus Embossing Folder-Field Of Diamonds

Sizzix Textured Impressions Plus Embossing Folder-Field Of Diamonds

  • Hickory Hills, Illinois, United States
  • Jun 7th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies