+ Post new Ad
micrometer mic carriage stop for South Bend 9" Lathe, US $6600 – Picture 0
micrometer mic carriage stop for South Bend 9" Lathe, US $6600 – Picture 0

Micrometer Mic Carriage Stop For South Bend 9" Lathe

US $6600

  • Harvard, Massachusetts, United States
  • Jun 9th
Open on mobile:
QR code
This is a prototype that was made for the micrometer stops i used to sell. This one has sat around the shop and the paint/etc is pretty beat up as seen. See photos for details. It has been many years but if i recall correctly the actual movement on this didn't correspond exactly with the dial increments so i think we went to a different thread pitch inside or something. Not sure. Even if that is the case, it is still a useful accy for your lathe if just using for repeat stops and not as a measuring device. Fits a 9" southbend model A B or C lathe.

Directions

Similar products from Tools for Lathe Machines

Warner Swasey Adjustable Knee tool M-1863 #3, #4. Turret lathe NR

Warner Swasey Adjustable Knee tool M-1863 #3, #4. Turret lathe NR

  • Hawthorne, California, United States
  • Jun 9th
Craftsman 109 lathe Threading dial and mounting bolt

Craftsman 109 lathe Threading dial and mounting bolt

  • Williamston, Michigan, United States
  • Jun 9th
3" CURVED ROLLING STEEL DOOR ROLL FORM MACHINE - STEEL SLATS- CUT TO LENGTH

3" CURVED ROLLING STEEL DOOR ROLL FORM MACHINE - STEEL SLATS- CUT TO LENGTH

  • Brooklyn, New York, United States
  • Jun 9th
TOS HEAVY DUTY ENGINE LATHE 31" x 252" 3.3" hole (28703)

TOS HEAVY DUTY ENGINE LATHE 31" x 252" 3.3" hole (28703)

  • Cincinnati, Ohio, United States
  • Jun 9th
ATLAS/CRAFTSMAN 10 &12" LATHE SPINDLE GEAR 9-100-32

ATLAS/CRAFTSMAN 10 &12" LATHE SPINDLE GEAR 9-100-32

  • Yreka, California, United States
  • Jun 9th
South Bend Lathe heavy 10K 2 speed switch FREE SHIPPING

South Bend Lathe heavy 10K 2 speed switch FREE SHIPPING

  • Montreal, Canada
  • Jun 9th
SUMMIT 17/19" LATHE LEADSCREW HALF NUT

SUMMIT 17/19" LATHE LEADSCREW HALF NUT

  • Lincoln, Nebraska, United States
  • Jun 9th
Morse taper 3 to 2 headstock spindle adapter for South Bend 9" Atlas Logan Lathe

Morse taper 3 to 2 headstock spindle adapter for South Bend 9" Atlas Logan Lathe

  • Harvard, Massachusetts, United States
  • Jun 9th
Tool Block Holder ( LOT )

Tool Block Holder ( LOT )

  • Athens, Pennsylvania, United States
  • Jun 9th
Williams Agrippa Sleeve Bar Wrench Tool Holder Wrench South Bend Lathe Others

Williams Agrippa Sleeve Bar Wrench Tool Holder Wrench South Bend Lathe Others

  • Wakefield, Rhode Island, United States
  • Jun 9th
lathe wrench 7/16" square

lathe wrench 7/16" square

  • Williamston, Michigan, United States
  • Jun 9th
ENGINE LATHE KNURLING TOOL HOLDER metal knurl ARMSTRONG USA No. 204-D

ENGINE LATHE KNURLING TOOL HOLDER metal knurl ARMSTRONG USA No. 204-D

  • Milroy, Indiana, United States
  • Jun 9th
TOOL HOLDER for ENGINE LATHE metal turning 5/16" hss bit ARMSTRONG USA No. 1-L

TOOL HOLDER for ENGINE LATHE metal turning 5/16" hss bit ARMSTRONG USA No. 1-L

  • Milroy, Indiana, United States
  • Jun 9th
Old ~South Bend Machinist Tool Machine Lathe ART PRINT AD~ ORIGINAL ANTIQUE 1930

Old ~South Bend Machinist Tool Machine Lathe ART PRINT AD~ ORIGINAL ANTIQUE 1930

  • Indiana Home Of "The INDY 500", United States
  • Jun 9th
South Bend 14.5" lathe

South Bend 14.5" lathe

  • Kenosha, Wisconsin, United States
  • Jun 9th
KENNAMETAL TOOL HOLDER DCLNL-246D 1-1/2" SQ SHANK 6"OAL LH + 5 INSERTS NEW

KENNAMETAL TOOL HOLDER DCLNL-246D 1-1/2" SQ SHANK 6"OAL LH + 5 INSERTS NEW

  • Spencer, Indiana, United States
  • Jun 9th
KENNAMETAL TOOL HOLDER DTFNR-204D 1-1/4" SQ SHANK 6"OAL RH + 5 INSERTS NEW

KENNAMETAL TOOL HOLDER DTFNR-204D 1-1/4" SQ SHANK 6"OAL RH + 5 INSERTS NEW

  • Spencer, Indiana, United States
  • Jun 9th
Used! Gamet 3 Jaw Power Chuck, 6 PSHP 160-2, 43100

Used! Gamet 3 Jaw Power Chuck, 6 PSHP 160-2, 43100

  • Sturgis, Michigan, United States
  • Jun 9th
NEW Seco CFIR-100-04D Indexable Turning Tool Holder CFIR10004D

NEW Seco CFIR-100-04D Indexable Turning Tool Holder CFIR10004D

  • Stockton, California, United States
  • Jun 9th
Used Seco CFIR-100-04D Indexable Turning Tool Holder CFIR10004D

Used Seco CFIR-100-04D Indexable Turning Tool Holder CFIR10004D

  • Stockton, California, United States
  • Jun 9th

People who viewed this item also vieved

#22 RD COLLET SET 5/16", 7/16", 9/16", 11/16" 4 PCS TOTAL

#22 RD COLLET SET 5/16", 7/16", 9/16", 11/16" 4 PCS TOTAL

  • Fox Lake, Illinois, United States
  • Jan 30th
#22 RD COLLET SET 27/64", 7/16", 29/64", 3 PCS TOTAL

#22 RD COLLET SET 27/64", 7/16", 29/64", 3 PCS TOTAL

  • Fox Lake, Illinois, United States
  • Jan 30th
#22 RD COLLET SET 7/16", 11/16", 2 PCS TOTAL

#22 RD COLLET SET 7/16", 11/16", 2 PCS TOTAL

  • Fox Lake, Illinois, United States
  • Jan 30th
Perma Coil 1208-110 Thread Kit 5/8 -18 Coarse uses HELI MADE IN USA

Perma Coil 1208-110 Thread Kit 5/8 -18 Coarse uses HELI MADE IN USA

  • Denver, Colorado, United States
  • Jan 30th
JET RADIAL DRILL JRD-750 3' x 8" (28469)

JET RADIAL DRILL JRD-750 3' x 8" (28469)

  • Cincinnati, Ohio, United States
  • Jan 30th
Jacobs 14 Ball Bearing Drill Chuck 0 - 1/2" Cap. 2 MT Arbor, Used, WARRANTY

Jacobs 14 Ball Bearing Drill Chuck 0 - 1/2" Cap. 2 MT Arbor, Used, WARRANTY

  • Grand Rapids, Michigan, United States
  • Jan 30th
Wire EDM V-block, Vise, and mount block

Wire EDM V-block, Vise, and mount block

  • Rochester, New York, United States
  • Jan 30th
Wire EDM V-block and mount block

Wire EDM V-block and mount block

  • Rochester, New York, United States
  • Jan 30th
#TRM-21 ELTEE Pulsitron 30 Amp Ram-Type EDM Machine (New 1987)

#TRM-21 ELTEE Pulsitron 30 Amp Ram-Type EDM Machine (New 1987)

  • Hauppauge, New York, United States
  • Jan 30th
6.75" Thrt Heck Industries 3C Trace-A-Punch Duplicator PUNCH PRESS, 1-1/2 HP 110

6.75" Thrt Heck Industries 3C Trace-A-Punch Duplicator PUNCH PRESS, 1-1/2 HP 110

  • Harrison, New Jersey, United States
  • Jan 30th
16" Thrt Heck Industries 4 Trace-A-Punch Duplicator PUNCH PRESS, 3 HP 220/460V,

16" Thrt Heck Industries 4 Trace-A-Punch Duplicator PUNCH PRESS, 3 HP 220/460V,

  • Harrison, New Jersey, United States
  • Jan 30th
0.125" Cap. 4" Thrt Heck Industries TB400 Tubing Nibbler NIBBLER, 3/4 HP 110/220

0.125" Cap. 4" Thrt Heck Industries TB400 Tubing Nibbler NIBBLER, 3/4 HP 110/220

  • Harrison, New Jersey, United States
  • Jan 30th
Giant Vibratory Cob Dryer No. GB8 3HP 8 Cubic Feet Bowl Size (21134)

Giant Vibratory Cob Dryer No. GB8 3HP 8 Cubic Feet Bowl Size (21134)

  • Cincinnati, Ohio, United States
  • Jan 30th
Automated Finishing Tub Model 2V20 (27176)

Automated Finishing Tub Model 2V20 (27176)

  • Cincinnati, Ohio, United States
  • Jan 30th
SUNNEN HONING MANDREL ASSORTED GUIDE SHOES UBB UBC VAC VBC

SUNNEN HONING MANDREL ASSORTED GUIDE SHOES UBB UBC VAC VBC

  • Chino, California, United States
  • Jan 30th
8" X 10" SHIGIYA (JAPANESE) HIGH-PRECISION UNIVERSAL ID/OD GRINDER

8" X 10" SHIGIYA (JAPANESE) HIGH-PRECISION UNIVERSAL ID/OD GRINDER

  • Harrison, New Jersey, United States
  • Jan 30th
RUSH MODEL: 252S SEMI-AUTOMATIC DRILL GRINDER

RUSH MODEL: 252S SEMI-AUTOMATIC DRILL GRINDER

  • Harrison, New Jersey, United States
  • Jan 30th
19.68" Swg 118" cc Tos BHU-50A OD GRINDER, hyd Tbl, auto infeed, plunge, rapid,

19.68" Swg 118" cc Tos BHU-50A OD GRINDER, hyd Tbl, auto infeed, plunge, rapid,

  • Harrison, New Jersey, United States
  • Jan 30th
1 NEW ISCAR MULTI-MASTER BIT MM EB500A37-4T08908

1 NEW ISCAR MULTI-MASTER BIT MM EB500A37-4T08908

  • Wadley, Alabama, United States
  • Jan 30th
1 x Pre-Owned DMC 60 T,Deckel Maho,DMG,at European Machine Tools.LLC WI

1 x Pre-Owned DMC 60 T,Deckel Maho,DMG,at European Machine Tools.LLC WI

  • Hartland, Wisconsin, United States
  • Jan 30th
USED INVOLUTE GEAR CUTTER #2 8P 55-134T 1"bore Brown And Sharpe

USED INVOLUTE GEAR CUTTER #2 8P 55-134T 1"bore Brown And Sharpe

  • Kelly, North Carolina, United States
  • Jan 30th
INGERSOLL RAND TWPE1 HYDRAULIC WRENCH TORQUE SYSTEM 1-1/2HP 230V 1 PHASE B234109

INGERSOLL RAND TWPE1 HYDRAULIC WRENCH TORQUE SYSTEM 1-1/2HP 230V 1 PHASE B234109

  • Buffalo, New York, United States
  • Jan 30th
MIDWEST SNIPS MW-P6300 Cable Cutter,Wire Rope,Hard Wire

MIDWEST SNIPS MW-P6300 Cable Cutter,Wire Rope,Hard Wire

  • Saint Pauls, North Carolina, United States
  • Jan 30th
GE Healthcare Assembly / Disassembly Rod for Conductivity Sensor, 28-4041-90

GE Healthcare Assembly / Disassembly Rod for Conductivity Sensor, 28-4041-90

  • Bristol, Connecticut, United States
  • Jan 30th
Delta Table Saw

Delta Table Saw

  • Odessa, Florida, United States
  • Jan 30th
DOALL Model TF-14H VERTICAL BAND SAW 14"x21", Tilt Frame, Vari-Speed, Hydraulic

DOALL Model TF-14H VERTICAL BAND SAW 14"x21", Tilt Frame, Vari-Speed, Hydraulic

  • Fountain Valley, California, United States
  • Jan 30th
Slitting & Slotting Saw Arbor for 3/8" Holes with 1/2" Shank .0004"TiR Toolmex

Slitting & Slotting Saw Arbor for 3/8" Holes with 1/2" Shank .0004"TiR Toolmex

  • Seminole, Florida, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies