Jacobs Chuck 0085330 HSK 63 A Shell/ Face Mill Tool Holder 40mm Diameter with 60mm Projection Technical Details Balanced to 8,000 RPM Provides more accurate, rigid tool holder-to-spindle mount tapers Taper grounded to AT3 or better Easy change/setup and low maintenance Through spindle coolant Product Description From the Manufacturer
Jacobs Chuck 0085220 CAT V 50 Shell/ Face Mill Tool Holder 1-1/4-Inch Diameter with 5-Inch Projection Technical Details Balanced to 8,000 RPM Provides more accurate, rigid tool holder-to-spindle mount tapers Taper grounded to AT3 or better Easy change/setup and low maintenance Through spindle coolant Product Description From the Manufacturer The Jacobs CAT V 50 Shell/Face mill tool holder is designed to hold up to a 1-1/4-Inch shank cutting tool. It has a 5-Inch projection an
Jacobs Chuck 0066321 BT 50 Tension/ Compression Tap Holder Size M14 to M36 with 251.8mm Projection Brand New In Package Retail $825 The Jacobs BT 50 tension/compression tap holder is used for no.3 tap collet system with the collet size range from M14 to M36 with 251.8-mm projection. It has been prebalanced to 6000 RPM at G 6.3-Inch. The Jacobs BT 50 tension/compression tap holder features a quick change style allowing taps to be changed quickly.
This is a Grizzly ER40-MS3 quick change collet set. Spring collets are hardened and ground. Collets include 1/8", 1/4", 1/2", 5/8", 3/4", 7/8", and 1". Comes with spanner w
3/16" TO 3/4"" DRILL CHUCK R-8 TAPER FOR MILLING MACHINE!!! R-8 TAPER Fits BRIDGEPORT R-8 BRAND NEW R-8 TAPER PIN INCLUDED KEY INCLUDED WILL WORK IN ANY MACHINE WITH R-8 TAPER BRAND NEW- SHIPS U.S.P.S for $9.00
Sandvik Coromant Hydro Grip Cat 40 Taper Tool Holders. Appear to be in like new condition.Seller has no use for them,and would like to sell.ID bore measures slightly bigger than 3/4",so it must be a 20mm metric holder.I have 3 available.I also have the hydraulic pump to load and unload tools listed on ebay.
Sandvik Coromant Hydro Grip Cat 40 Taper Tool Holders. Appear to be in like new condition.Seller has no use for them,and would like to sell.ID bore measures slightly bigger than 1/2",so it might be a 12mm metric holder.I have 3 available.One holder has what looks like a 10mm collet in it.I also have the hydraulic pump to load and unload tools listed on ebay.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.