milling inserts for sale, brand-new and used.

ISCAR - ONHU 050505-TN IC808 milling carbide inserts The listing is for 3 packs = 30 pcs. - 'FACTORY PACK' grade IC808 - A hard fine grain substrate, with excellent chipping resistance, combined with a new "SUMO TEC" TiAlN PVD coating. Provides high wear resistance.

Ingersoll milling insert AOMT180508 Grade IN1030. .03 corner radius I have 100 pieces available This is a tough and durable insert. This is for 10 inserts.

Carboloy milling cutter with two brand new inserts installed and 10 brand new inserts in a box included 1.250 shank and 4.250 overall length

SANDVIK R245-18 T6M-PM 1030 milling inserts The listing is for 7 packs = 70 pcs.: 'FACTORY SEALED' grade 1030 (HC) – P30 (P15 – P35) - PVD coated carbide grade. GC1030 is the first choice in unstable conditions such as long edge, chip jamming, deep shoulder and end milling, long overhang, turn mill operations, etc. Can be used as a backup choice in tough operations.

SANDVIK 490R-140408M-PM 4240 milling inserts The listing is for 5 packs = 50 pcs. - 'FACTORY PACK' grade 4240 (HC) – P40 (P35 – P50) - Tough coated carbide grade for demanding operations in steel milling. For end mill and square shoulder concepts, grade GC4240 should be used in more stable conditions, such as short overhangs, face milling, shallow shoulder milling, etc.

SANDVIK R245-12T3E-PL 1030 milling inserts The listing is for 7 packs = 70 pcs.: 'FACTORY SEALED' grade 1030 (HC) – P30 (P15 – P35) - PVD coated carbide grade. GC1030 is the first choice in unstable conditions such as long edge, chip jamming, deep shoulder and end milling, long overhang, turn mill operations, etc. Can be used as a backup choice in tough operations.

SANDVIK R390-17 04 64E-PM 1030 milling inserts The listing is for 2 packs = 20 pcs.: 'FACTORY PACK' grade 1030 (HC) – P30 (P15 – P35) - PVD coated carbide grade. GC1030 is the first choice in unstable conditions such as long edge, chip jamming, deep shoulder and end milling, long overhang, turn mill operations, etc. Can be used as a backup choice in tough operations.

SANDVIK R390-17 04 50E-PM 1030 milling inserts The listing is for 2 packs = 20 pcs.: 'FACTORY SEALED' grade 1030 (HC) – P30 (P15 – P35) - PVD coated carbide grade. GC1030 is the first choice in unstable conditions such as long edge, chip jamming, deep shoulder and end milling, long overhang, turn mill operations, etc. Can be used as a backup choice in tough operations.

SANDVIK R390-17 04 50E-PM 4240 milling inserts The listing is for 2 packs = 20 pcs.: 'FACTORY SEALED' grade 4240 (HC) – P40 (P35 – P50) - Tough coated carbide grade for demanding operations in steel milling. For end mill and square shoulder concepts, grade GC4240 should be used in more stable conditions, such as short overhangs, face milling, shallow shoulder milling, etc. For other concepts, grade GC4240 is the first or backup choice in toug

SANDVIK R390-17 04 31M-PM 4240 milling inserts The listing is for 4 packs = 40 pcs.: 'FACTORY SEALED' grade 4240 (HC) – P40 (P35 – P50) - Tough coated carbide grade for demanding operations in steel milling. For end mill and square shoulder concepts, grade GC4240 should be used in more stable conditions, such as short overhangs, face milling, shallow shoulder milling, etc. For other concepts, grade GC4240 is the first or backup choice in toug

SANDVIK R390-17 04 24E-PM 4240 milling inserts The listing is for 4 packs = 40 pcs.: 'FACTORY SEALED' grade 4240 (HC) – P40 (P35 – P50) - Tough coated carbide grade for demanding operations in steel milling. For end mill and square shoulder concepts, grade GC4240 should be used in more stable conditions, such as short overhangs, face milling, shallow shoulder milling, etc. For other concepts, grade GC4240 is the first or backup choice in toug

SANDVIK R390-17 04 24E-PM 1030 milling inserts The listing is for 5 packs = 50 pcs.: 'FACTORY SEALED' grade 1030 (HC) – P30 (P15 – P35) - PVD coated carbide grade. GC1030 is the first choice in unstable conditions such as long edge, chip jamming, deep shoulder and end milling, long overhang, turn mill operations, etc. Can be used as a backup choice in tough operations.

There are 46 here. They are efficient metal removal tools. Thank you for looking.

20 inserts total. 10 seco 10 sumitomo

SECO LOT OF 1 INSERT LNKT 050424PPTN2-M06 F40M

KENNAMETAL BID IS FOR 1 INSERT K02381204 KC250

THIS ITEM IS SOLD IN A LOT OF 10 PIECES. NEW KYOCERA CERATIP CERMET INSERTS. TC30 is a Cermet insert that works well for high speed finishing of steel, stainless steel, cast iron, and most non-ferrous materials where excellent surface finish and / or size control is critical.

Ingersoll NHET380400R Grade IN1030 BHBP33-15 carbide Milling inserts. Brand new. You are bidding per piece.

PRAMET SPU 845 S 8026T milling inserts (ISO: SPUN 250620 S 8026T) The listing is for 10 packs = 100 pcs. = 'FACTORY PACK' grade 8026T (HC) – P30 (P20 – P40), (M20 - M30) (K20 - K35) - PVD coated carbide grade: - Substrate with high content of cubical carbides; - Nanostructural coating applied by PVD method; - Suitable for machining of materials groups P,M, conditionally for K; - Medium and higher feed. - Medium up to high cutting speed.

ISCAR TPKN 2204PDTR-42 IC50M milling inserts (TPK 432 / TPK 433) This listing is for 5 packs = 50 pcs.: 'FACTORY PACK' 'TPKN 2204PDTR-42' - general use milling inserts. The -42 has improved tool life. grade IC50M - uncoat