+ Post new Ad
MOLD TEMPERATURE CONTROLLER UP TO 203 F, US $18000 – Picture 0
MOLD TEMPERATURE CONTROLLER UP TO 203 F, US $18000 – Picture 0

Mold Temperature Controller Up To 203 F

US $18000

  • Azusa, California, United States
  • May 26th
Open on mobile:
QR code
WZCTM-W40 Mold Temperature Controller Item Description High-precision temperature controller (PID controller), can accurately control and display the injection mold temperature within +- 1° Direct pump with durable seal. Aluminum motor housing for better heat dissipation. Automatic water refill and direct cooling. Reverse current relay warnings Pump reverse protection Pump overload protection Automatic shut down and alarm upon low water level Power requirements; 3 Phase 460V/60Hz (good for 480V) Technical Data WZCTM-W40 Mold Temperature Controller,  3 Phase 220V Model Maximum Temp. (fahrenheit) Heater Pump Power Maximum Flow Rate Maximum Pressure External Dimensions HxWxD(mm) Piping Weight Transfer Medium Cooling WZCTM-W40 203 water 6kw 400w 10.5 g/m 50 psi 27x13x27 3/8”x 2 3/8” 99lb Warranty ONE YEAR WARRANTY AGAINST FACTORY DEFECTS, ANY ADDITION, SUBTRACTION OR MODIFICATION, WILL VOID THE WARRANTY ALL OUR PRODUCTS ARE PROFESSIONALLY TESTED BEFORE SHIPPING FROM OUR WAREHOUSE IN AZUSA, CALIFORNIA SPARE PARTS, SERVICE & TECH SUPPORT AVAILABLE        TRUST THE PROFESSIONALS                           W & Z MACHINERY SALES INC 1016 W Gladstone Street Azusa, CA 91702 Toll free 877-855-4558 (US ONLY) Ph 626-691-0264 Fx 626-691-0265 www.wzmachinerysystems.com info@wzmachinerysystems.com

Directions

Similar products from IBM Processing

1998 Engel 250 Ton Injection Molding Machine, Model ES700/250

1998 Engel 250 Ton Injection Molding Machine, Model ES700/250

  • Ontario, United States
  • May 26th
Garlock Klozure shaft oil seal Model 23 Item # 25003-8656 13.779 shaft

Garlock Klozure shaft oil seal Model 23 Item # 25003-8656 13.779 shaft

  • Arden, North Carolina, United States
  • May 26th
80 Ton, 6.5 Oz. Van Dorn Injection Molding Machine '85

80 Ton, 6.5 Oz. Van Dorn Injection Molding Machine '85

  • Troy, Michigan, United States
  • May 26th
Complete Blow Mold Bottle Line

Complete Blow Mold Bottle Line

  • Bucyrus, Ohio, United States
  • May 26th
320 Ton, 33.16 Oz. Demag Injection Molding Machine '96

320 Ton, 33.16 Oz. Demag Injection Molding Machine '96

  • Henderson, Colorado, United States
  • May 26th
PET Bottle Leak Tester

PET Bottle Leak Tester

  • Saskatoon, Saskatchewan, Canada
  • May 26th
DME mold heat termination box

DME mold heat termination box

  • Epsom, New Hampshire, United States
  • May 26th
Slautterback Cartridge Heater 500Watts 240VAC Appr. Length 4.75" Diameter 1/2"

Slautterback Cartridge Heater 500Watts 240VAC Appr. Length 4.75" Diameter 1/2"

  • Quebec Canada, Canada
  • May 26th
Slautterback Heating Cartridge 150W 120V 1254TP Appr. Length 2" Diameter 1/4"

Slautterback Heating Cartridge 150W 120V 1254TP Appr. Length 2" Diameter 1/4"

  • Quebec Canada, Canada
  • May 26th
Van Air Systems D30 Gallon Deliquescent Compressed Air Dryer

Van Air Systems D30 Gallon Deliquescent Compressed Air Dryer

  • Caddo Mills, Texas, United States
  • May 26th
Two ENGEL KEBA GC 201/A Display Cards

Two ENGEL KEBA GC 201/A Display Cards

  • Dover, Pennsylvania, United States
  • May 26th
Arburg Allrounder 221-55-250 Injection Molder

Arburg Allrounder 221-55-250 Injection Molder

  • Greenwich, Connecticut, United States
  • May 26th
MAG SSB20 Blow Molder, Package w/ B-M Compressor, Chiller, 2 Cavity, LIGHT USE!

MAG SSB20 Blow Molder, Package w/ B-M Compressor, Chiller, 2 Cavity, LIGHT USE!

  • Waco, Texas, United States
  • May 26th
DME Sprue Bushing B6602 7/32 "O" and 1/2 "R"

DME Sprue Bushing B6602 7/32 "O" and 1/2 "R"

  • Cochranton, Pennsylvania, United States
  • May 26th
DME Set of 2 Male Tapered Interlocks MT0411

DME Set of 2 Male Tapered Interlocks MT0411

  • Cochranton, Pennsylvania, United States
  • May 26th
Lot of 4 PCS Sprue Bushings B604-71 (x3) and B606-71 (x1)

Lot of 4 PCS Sprue Bushings B604-71 (x3) and B606-71 (x1)

  • Cochranton, Pennsylvania, United States
  • May 26th
D-M-E Sprue Bushing B-series B-6603 1.0 Dia x 2-1/2 O=7/32 R=3/4

D-M-E Sprue Bushing B-series B-6603 1.0 Dia x 2-1/2 O=7/32 R=3/4

  • NC, United States
  • May 26th
4/3 way valve Bosch No. 0 810 001 701, Arburg used spare parts

4/3 way valve Bosch No. 0 810 001 701, Arburg used spare parts

  • Pegnitz, Germany
  • May 26th
4/2 way valve Bosch No. 0 810 090 190, Engel used spare parts & machines

4/2 way valve Bosch No. 0 810 090 190, Engel used spare parts & machines

  • Pegnitz, Germany
  • May 26th
4/2 way valve Rexroth No. 4WE 6 UA62/EG24N9K4, Engel injection molding machines

4/2 way valve Rexroth No. 4WE 6 UA62/EG24N9K4, Engel injection molding machines

  • Pegnitz, Germany
  • May 26th

People who viewed this item also vieved

5x Single Nozzle Throat Pipes Fixing Block for 3D Printer Makerbot Extruder

5x Single Nozzle Throat Pipes Fixing Block for 3D Printer Makerbot Extruder

  • Shenzhen, China
  • Feb 25th
3x Single Nozzle Throat Pipes Fixing Block for 3D Printer Makerbot Extruder

3x Single Nozzle Throat Pipes Fixing Block for 3D Printer Makerbot Extruder

  • Shenzhen, China
  • Feb 25th
2x Single Nozzle Throat Pipes Fixing Block for 3D Printer Makerbot Extruder

2x Single Nozzle Throat Pipes Fixing Block for 3D Printer Makerbot Extruder

  • Shenzhen, China
  • Feb 25th
2pcs M6 x 20mm Throat Copper Pipes for 3mm 3D Printer Reprap/Makerbot/Ultimaker

2pcs M6 x 20mm Throat Copper Pipes for 3mm 3D Printer Reprap/Makerbot/Ultimaker

  • Shenzhen, China
  • Feb 25th
5pcs M6 x 20mm Throat Copper Pipes for 3mm 3D Printer Reprap/Makerbot/Ultimaker

5pcs M6 x 20mm Throat Copper Pipes for 3mm 3D Printer Reprap/Makerbot/Ultimaker

  • Shenzhen, China
  • Feb 25th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies