morse taper 3 for sale, brand-new and used.

FOR YOUR CONSIDERATION:

FOR YOUR CONSIDERATION:

In a used condition exactly like on the pictures Sorry but all sales are final. No returns

THIS IS A LOT OF THREE DRILL BITS,LARGEST IS THREE FLUTE APPROX.1.100",2ND ONE IS FOUR FLUTE 1" & LAST ONE IS FOUR FLUTE 27/32 TAPER SHANK DRILL, 11" OAL, HS, MORSE #3, Size: 27/32",1" & 1.100" Overall Length: AROUND 11" Flute Length: 7" Shank Length: 4" Shank Top Diameter: .09380" Shank Bottom Diameter: .7780" Appears to be Morse Shank #3 3 & 4 Flutes High Speed *ALL MEASUREMENTS ARE APPROXIMATE*

LSI TWIST DRILL 1-7/64" TAPER SHANK DRILL, 13" OAL, HS, MORSE #4, Size: 1-3/16" Overall Length: 13" Flute Length: 8" Shank Length: 5" Shank Top Diameter: 1.230" Shank Bottom Diameter: 1.020" Appears to be Morse Shank #4 2 Flutes High Speed *ALL MEASUREMENTS ARE APPROXIMATE*

LSI TWIST DRILL 1-3/16" TAPER SHANK DRILL, 13" OAL, HS, MORSE #4, Size: 1-3/16" Overall Length: 13" Flute Length: 8" Shank Length: 5" Shank Top Diameter: 1.230" Shank Bottom Diameter: 1.020" Appears to be Morse Shank #4 2 Flutes High Speed *ALL MEASUREMENTS ARE APPROXIMATE*

TWIST DRILL 1-3/8" TAPER SHANK DRILL, 15" OAL, HS, MORSE #4,IT IS FRESHLY SHARPENED Size: 1-25/64" Overall Length: 15" Flute Length: 10" Shank Length: 5" Shank Top Diameter: 1.230" Shank Bottom Diameter: 1.020" Appears to be Morse Shank #4 2 Flutes High Speed *ALL MEASUREMENTS ARE APPROXIMATE*

Nice set of morse tapered drill bits. Also comes with a box and Stanley hand drill .  There should be a total of 31 pcs, 3 are missing and 1 is broke. Missing: 13/32" 1/4" 1/8"

CHICAGO LATROBE DOUBLE CIRCLE TWIST DRILL 1-13/16" TAPER SHANK DRILL, 11-1/4" OAL, HS, MORSE #4,IT IS FRESHLY SHARPENED Size: 1-13/16" Overall Length: 11-1/4" Flute Length: 6-1/2" Shank Length: 4-3/4" Shank Top Diameter: 1.230" Shank Bottom Diameter: 1.020" Appears to be Morse Shank #4 2 Flutes High Speed *ALL MEASUREMENTS ARE APPROXIMATE*

Pratt and Whitney jig bore taper reamer set 2" to 3/8" No 4 morse sizes 2", 1-3/4", 1-1/2", 1-3/8", 1-1/4", 1-1/8" No 3 morse 1", 7/8", 3/4" No. 2 morse 5/8", No. 1 morse 1/2", 7/16", 1/2"

TO

Morse 3/8" - 16 Hand Tap (Taper). Item #32307. Item appears new and unused.

Morse 1/2" - 13 Hand Tap (Taper). Item #32311. Item appears new and unused.

Antique Vintage Taps 1930 - 1950 Winter, ACE, MORSE, Greenfield, Threadwell, Brubaker, Bay State, Butterfield, J.M. Carpenter

Excellent condition Extra large super duty ball bearing 1/8 to 3/4 Capacity # 4 Morse taper long shank and # 4 Jacobs short taper THIS IS GREASY , STRAIGHT FROM MACINE SHOP.

MACHINIST 2 MORSE TAPER DRILL SLEEVE ADAPTERS used in good condition.You are getting 2 to 3 & 1 to 2.Need a little cleaning.Buyer pays shipping. Vintage pair of Morse Tapors Needs a good cleaning both have some light surface rust.

This is a nice used morse taper #3 shank master holder for holding cutters that have the miniature morse taper shank. The Large diameter of the inside taper which is right at the end of the hole measures about .935" Made by SJ Scully Jones Co. Chicago USA model 3-B-3 52117 S-J Overall Length is 6-1/2" This one does have a set screw hole like the one in the photo but it is not lined up with the slot like the one in the photo, is about 20 degrees to the right of the slot.