This is a high quality 80mm spindle mount bracket. Made in USA with 1/2in 6061 (made in USA) industrial grade aluminum. Mounting bolts are located 55mm apart for small Z axis.
I3 Prusa reworks edition 3d printed parts in GREEN!!!The kit comes with the following parts in ABS (it will stand higher temperatures than PLA)! 1x Z Axis Endstop Holder 1x X Carriage designed for LM8UU bearings 1x X End Idler bracket designed for 8mm smooth rod and LM8UU bearings 1x X End Motor Bracket designed for 8mm smooth rod and LM8UU bearings 1x Y Belt holder
1/2 HP - 1725 RPM General Electric Motor that came off a 1250 Mulit Press and was working when we took it off. Comes with pulley and mounting bracket. Bracket will be taken off for shipping purposes but just connects with four bolts if you need it.
Bracket Kit, EZ-Steer Krone Big M Harvesters You are bidding on a new EZ-Steer Platform kit bracket for a: Krone MII Mower Krone Big X V8/12 Forage Chopper Krone Big X 500/650/800/1000 Forage Chopper This bracket attaches to the vehicle steering column to provide support for the steering motor for either the Trimble® AgGPS® EZ-Steer® assisted steering system or the EZ-Steer 500 system. It is important to only use official Trimble manufactured platform kits.
Bracket Kit, EZ-Steer Gleaner RX0 Combine You are bidding on a new EZ-Steer Platform kit bracket for a Gleaner RX0 Combine. This bracket attaches to the vehicle steering column to provide support for the steering motor for either the Trimble® AgGPS® EZ-Steer® assisted steering system or the EZ-Steer 500 system. It is important to only use official Trimble manufactured platform kits.
Trimble EZ-Steer Bracket Kit This bracket attaches to the vehicle steering column to provide support for the steering motor for either the Trimble® AgGPS® EZ-Steer® assisted steering system or the EZ-Steer 500 system. Will work on John Deere 6X00, 6X10, 6X20, 7X00, 7X10, 7X20
Trimble EZ-Steer Bracket Kit This bracket attaches to the vehicle steering column to provide support for the steering motor for either the Trimble® AgGPS® EZ-Steer® assisted steering system or the EZ-Steer 500 system. Will work on John Deere 47X0, 7X20, 8X00, 8X10, 8X20, 8X30, 9X00, 9X20, 9X30
EZ-Steer Platform Kit - Case IH JX-U, New Holland TS-A This bracket attaches to the vehicle steering column to provide support for the steering motor for either the Trimble®AgGPS
EZ-Steer Platform Kit - Hesston Swather This bracket attaches to the vehicle steering column to provide support for the steering motor for either the Trimble®AgGPS
EZ-Steer Platform Kit - Case IH MX/STX, New Holland TG/TJ This bracket attaches to the vehicle steering column to provide support for the steering motor for either the Trimb
Forward Off Reverse drum switch made by Cutler-Hammer, removed from a 1942 South Bend 10L lathe. Bracket for mounting included, can include conduit piece at buyer's request. I believe this is a size "0" and was running a 3/4HP 120V motor when removed.
Here is a Gast 12VDC Oil Less Vacuum Pump Model DOA-V111-JH. Specs: 1/8 HP, 2100 RPM, 12 VOLTS, 14 Amps. It came from a motor home and is in good working condition.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.