You are checking out an antique Porter Motor No. 2 made by K&D-Kendrick and Davis. I have to believe since you are reading this you must know what this is??.....as I do NOT.
This is a strong running HEAVY General Electric 1/2 Horse Power Dual Shaft Utility motor with Thermal Protection from a band saw. 1/2 Horsepower Model 1E166A 115 Volt 60 Hz 7.5 amp 1725 RPM 1 phase.with reset button The shafts are each 5/8" diameter with a key slot both about 1 7/8" Long It has wear and tear dust and dirt rust and pitting but runs strong. Comes with 1 key and built in mounting bracket as pictured.
Leeson Electric Motor with Gear Reduction Model- C6C17FC5F 1725 RPM / 44 RPM 115/208-230v 60 Hz 8.8/4.4A 1/2HP Cont Duty Titan Gear Reduction Model IC45 40:1 Ratio 3/4" Diam Shaft 2" Long Shaft No mounting bracket on motor as this was mounted from the gear reduction box. Any questions please email or feel free to call Delaney's Surplus at 608-643-8009 Closed Tuesdays and Wednesdays. Stock 081915C
Motor, 2 speed, 5.5/2.75hp, 1675/825 rpm, 440V 3ph, Clutch, Brake,Baldor, Edro This is a used two speed motor made by Baldor, part number 37E436W930. The motor has an airclutch and brake disk for an air caliper installed. Air caliper is not included.
ITEM LISTSYK Class 3 Precision End Support Unit Set, ( This item in stock and normally 5 days send out. )Motor bracket MBA12-C (Qty 1) Fixed-side FK12 (Qty 1) Supported-side BF12-C3 (Qty 1) FK12 Built-in Taiwan P5 class bearing, suitable for all Taiwan C3 / C5 grinding ball screws (HIWIN,TBI etc). Technical / Dimensions: Refer to the SYK technical manu
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
