motor keyway for sale, brand-new and used.

**SEE FALK OMNIBOX PDF FOR COMPLETE SPECS.** 20:1 RATIO OUTPUT TORQUE: 2633 in-lbs. @ 1750 MOTOR RPM MAX. INPUT HP AT 1750 RPM: 4.188 FRAME:140TC / C-FACE MOUNT DOUBLE OUTPUT SHAFTS DIA.

hydraulic motor Parker Nichols 110a-5-FS-0 E8 2309 1" diameter shaft with keyway and key (( GG3))

This is a strong running 1/3 Horsepower Rockwell Motor from a drill press Dust and dirt wear and tear rust and pitting but in good working condition.Cord has been spliced--see pictures 1/3 Horse 1725 RPM 115 Volt 60 Cycle 6.3 amp.1 phase. Thermally Protected Has a 5/8" diameter shaft with keyway --Key included about 2" long overall. The shaft rotates clockwise --right handed at shaft end It is Reversible.

~~** BALDOR VWDM3546 3 PH 1725 RPM 1 HP FR 56C 208-230/460 V INDUSTRIAL MOTOR **~~ ~~** VWDM3546 3 PH 1725 RPM 1 HP FR 56C 208-230/460 V INDUSTRIAL MOTOR **~~ ~~** SPEC. 35H828Y102 **~~ ~~** FRAME 56C **~~

1 HP@ 850 RPM / TEFC / 575/3/60, 1.0 SF, C-FACE, VERTICAL MOUNT DRIP COVER, 182T FRAME, NEMA PREMIUM EFFICIENCY, CLASS F, INSULATION CLASS B TEMP. RISE,1.125 DIA. SHAFT w/.188 KEYWAY SQ., GROUND PROV.

YOU ARE Looking at A NEW OLD STOCK RUBBER TIRE DRIVE PULLEY BONDED ON ALUMINUM HUB DRIVE PULLEY HAS 1-1/4" BORE WITH KEYWAY & 2 SET SCREWS. I HAVE 2 OF THEM AVAILABLE SHIPPING SHOWN ON CALCULATOR Need more information or Something else , E mail , Thanks for looking.

U.S. MOTORS U20E2D AE56A FR 256T 20 HP UNIMOUNT ELECTRIC MOTOR, NEW ** CATALOG NUMBER: U20E2D ** ** MODEL NUMBER: AE56A ** ** I.D.

new old stock dayton AC gearmotor this older 2Z849 is obsolete and replaced by 4FDZ2, unit is electrically reversable by changing wiring taps in motor unit has 5/8" dia output shaft w/keyway data sheet below http://www.grainger.com/product/DAYTON-AC-Gearmotor-151-to-200-RPM-2Z849 shipping weight 25lbs LOCATION: 8684 130A-3 SDPP GTC TERMS: items are sold AS-IS / as described.

1XFY3 Gearmotor 115/105VAC 76 / 100 RPM, 1/20 Input HP, 86 Nameplate RPM TENV You are bidding on an

Technical Specs ItemAC Gearmotor Voltage 115VAC Phase1 Hz60 Shaft Orientation: Parallel Reversible Shaft Output: No Shaft: Single Output Nameplate RPM: 31 Max. Torque: 800 in.-lb. Overhung Load: 400 lb.

This is a DAYTON Industrial Motor. Model: 3N0876 Volts: 230/460 Phase: 3 Hp: 1 RPM: 1725/1425 Frame: 56C Shaft Dia.: 5/8" Keyway: 3/16" This item is used and untested. There is some rust on the shaft.

DUAL RIGHT ANGLE OUTPUT SHAFTS 56C FLANGE MOTOR MOUNT CENTER HEIGHT: 2.630" OUTPUT SHAFT DIAMETER: 1.250" W/ 0.250" KEYWAY INPUT BORE: 0.875" W/ 0.187" KEYWAY LOC P1

Call Brett At 309-261-5695 for any questions or issues with your orders. B2 shelf Gast 4AM-NRV-92 Air Motor 1.8HP, 3000 RPM, 5/8" Shaft, NEW IN BOX, DATED 2010

Century Condenser Motor This is NEW by itself, Condenser Motor from Century, never used or damaged. Specifications: Horse: 1 Volts: 200/230C 60Hz

UP FOR SALE I HAVE A NICE ORIGINAL MAYTAG 92 FLYWHEEL HUB. NO CRACKS NO BREAKS NO REPAIRS. THE KEYWAY IS IN GOOD CONDITION.

RETAILS FOR $1200 SELLS ON OTHER SITES FOR $650++ 50 / 60 Hz 3 PHASE FRAME 143TC OUTPUT SHAFT DIAMETER 7/8" x 2" LENGHT WITH 3/16" KEYWAY CO175 LOC R1