mounted motor for sale, brand-new and used.

This motor is in great working condition and ready to be used! The motor specs are as follows; Horsepower : 5 Horsepower 1.15 Service Factor

JET 708320 JWS-22CS 1/2-Inch and 3/4-Inch Interchangeable Spindle 1-1/2-Horsepower Shaper, 115/230-Volt 1-Phase Brand New in Open Box. Paint on a couple corners is chipped but unit is brand new in unused condition.

????? function AddFavorited(sURL, sTitle) { try { window.external.addFavorit

Brand new powered tattoo machine coil winder with counter and tension device. The winding shaft is 1/4" diameter and is fitted with an 8-32 threaded rod so that you can screw your coil cores directly to it. Powered by a 0-12vdc 0-300 RPM motor.

General Rodrunner Sewer and Drain Cleaning Machine w 63 FT 1-1/4 Dual cable w L connectors used by professionals Today I am selling a General RodRunner Sewer Cleaning Machine with 1-1/4" CablesI tested the machine and It spins the cable forward and Reverse. The machine hasa 3/4 hp motor and it has a fresh coat of paint. This machine has minor cosmetic imperfections;as any used machine however this does not affect the machine's operation.

Goulds Water Technology10 GPM 4" Submersible Water Well Pump End 10GS05(Sold as pictured)

I'm only available Monday-Friday 8-4 pm Pacific Time This unit, the Allen Bradley 22B-D010N104 Series A 5hp was removed from an operating motor control center. The first four pictures are from the actual unit for sale, they show the hz readings on display and the attached motor was varying in speed accordingly.

9-40V DC Stepper Motor Speed Pulse Controller and Driver Board

Qty (3) US Motor - VERTICAL SHAFT ELECTRIC MOTORS FOR IRRIGATION PUMPS After closing down a golf club, we have (3) US Motor Vertical shaft electric motors from our operational irrigation system as follows: Qty (2) US Motor 50 HP 1800 RPM Motors frame: 326TPH. List Price: $7103 each. These two motors are older, however 1 of them was completely rebuilt in 2012.

THIS ITEM IS FROM MY LATE FATHER IN LAWS COLLECTION. HE RECENTLY PASSED. SOLD AS PICTURED.

New Dental Dentist Slow Low Speed Handpiece Complete Kit Set E-type 2 Holes

This motor is new old stock from a companies stock. Still on factory pallet unboxed to verify content. I will rebox prior to shipping and p

Dumore series 57 Tool Post grinder for 9" to 20" swing lathes.3/4 HP universal motor, which can run on DC or AC up to 120V. Motor armature and stator are wound so motor will always spin the same direction, independent of the polarity of the applied voltage. (I have tried 24V DC and 120V AC)This 15,000 RPM motor, with large and small pulleys, can turn the spindle from 4600 RPM to 42,500 RPM.

Schneider Electric / Square D TeSys® 3-Pole Reversing contactor has a full load inductive and resistive of 40/60 Amps. Coil has a voltage rating of 24 VDC at 50/60 Hz.

Meyers Vibra-Flex II Stainless Vibratory Conveyor 12" x 128" Cost over $28,000

COMMERCIAL BINDING CORPORATION 720-203-5638 Standard version features: PLUS version features: Round Holes: Standard 4mm round holes. OVAL hol