mounting rail for sale, brand-new and used.

8 PIECES OF MANUFACTURED PARTS MADE OF DELRIN MATERIAL CAN BE FOR USED FOR RAIL SYSTEM OR AS GUIDES MEASUREMENTS LONG 5-1/2" WIDTH 1-1/16" HEIGHT 1/2"

Clean Room Rail You are bidding on one Terra Universal CleanLean Rail Dual, model number 9605-05. For full specifications see: http://www.terrauniversal.com/product/9605-50 From the website: Useful for keeping your balance while applying cleanroom garments

Item: Espy® AutoTune Single Channel Control Module ES-1C-AT-XX, New in Factory Packaging with 20M sensor! • Quickly and easily calibrate the module with a push of the membrane button switch. • Microprocessor-based design enhances

Mirtec MV-7L In Line Type Vision Inspector AOI 45mm Topside Clearance option NG Marking system Installed 2007 2006 Vintage Serial # 17060309-0055 208V-240V Single Phase 15A 50-60 Hz MV-7L is a vision inspection system, which inspects the defects of the component, which is mounted. It uses the CCD COLOR camera and image management techniques to test the error in position of the mounted components. It prints out the test results on the monitor screen, thus the user can easily repair the errors.

Sony  CCD Camer

AE-3088D Semi-

Nice lite used Mario Cotta Tiny series model 45200 FB and  mounting rail bar with reck and pinion adjuster rail has been. Cut about 1/4 inch deep could be repair see pic 12 birth cutters come with blade.   Hardly used check picture Have 2 unit both in same condition Came off working machine Will ship to Europe please email for rate

Replacement vertical Delta nameplate for the dust door on your vintage UNISAW or heavy duty shaper. This sale is for a "new" vertical nameplate one of your pieces of vintage Delta shop equipment. The original Delta dust door nameplates were made from thin aluminum and were easily dented, dinged, damaged, or lost.

Replacement locking "bullets" for your Delta Unisaw vertical and tilt adjustment knobs. This sale is for a pair of these brass/bronze alloy bullets to repair the locking mechanism for one blade position control shaft of your Unisaw. When you are restoring your vintage Unisaw don't overlook replacing those worn and deformed brass plugs that provide the interfernce fit locking of the handwheels that adjust both the vertical blade height and the tilt angle.

Industrial Z Axis Mechanical Kit 4", 100mm Travel All in stock we ship in 24 hours other Z axis travel available check below 6"/150mm - 10"/250mm - 12"/300mm - 14"/350mm Z axis Parts List 2 Rails 15mm width 300mm/12" length 2 blocks for 15mm Rail Specification on http://www.motiontek.ca/linearsquarerail.html 1 Ball Screw 200mm (7.8

7 Teeth per inch, step down rail.  1-1/4 height, 5/8 thick steps down to 3/8 at track level...and 21-5/8 long, 5 mounting holes, threaded 1/4 - 28.  New old stock.

7 Teeth per inch, step down rail.  1-1/4 height, 5/8 thick steps down to 3/8 at track level...and 21-5/8 long, 5 mounting holes, threaded 1/4 - 28.  no chipped or missing teeth.

Welcome to suriy_teera Store

Insert plates for the Delta Unisaw "Junior" table saw Now you can replace that broken and/or chewed up OEM die cast insert plate on your valuable vintage Unisaw Junior saw. We have three styles of insert plates now available for the Junior. The listed price is for one insert style of your choice.

Decals for restoring your Vintage Delta Motor Nameplate We have recreated the motor nameplate data that was usually on a oval metal pla

OVER 125 OF THESE VERY POPULAR HEAVY DUTY BLADE WRENCHES HAVE BEEN SOLD. This is a new improved blade wrench specifically designed for the arbor nut on a Delta UNISAW. The wrench fits many other saw arbor nuts as well, that utilize a 7/8" outside flat to flat dimensioned nut to retain the blade.

AN ECONOMICAL DUST DOOR FOR YOUR DELTA UNISAW OR HD SHAPER Keep your shop clean by closing the saw and shaper cabinet openings to eliminate sawdust on the floor. These Delta cabinet doors fit good and latch firmly. Each fits the nominal 9" x 12" opening in the very common Delta Unisaw and shaper base cabinets.