First Point Energy Corp. (formerly Teldata Solutions) presents the TDS-2 Telemetry Interface Unit (TIU) as an advanced data recording device designed to communicate and deliver interval data to First Point’s AMR System. The TDS-2 is a low cost universal 2-port TIU with extensive data logging; power outage and independent port/meter tamper capability.
What you are bidding on is a BRAND NEW only OPENED for pictures: Safety Switch, 30A, 600VAC/DC, 3PH HU361AWKEI: PLEASE ASK QUESTIONS PRIOR TO BIDDING!! Thanks and Good luck! Model: HU361AWKEI Made in: USA Manufacturer: Square D Safety Switch, Fusible / Nonfusible: Nonfusible, Duty: Heavy, Amps: 30, Voltage: 600VA
18" High Performance Butterfly Valve Manufacturer: Pike Industries, Inc. Size: 18" End Connection: Lugged, ANSI 150 Body Material: 316SS Disc: 316SS Seat: PTFE Class: 150 Operator: EMO Actuator (see below) Actuator Manufacturer: Rotork Model No.: IQT 2000 Base: FA14 Enclosure: NEMA 4/6 IP68 Product data submittals and additional pertinent information available upon request. Valve and actuator were previously installed in low pressure air line.
Midwest GS1202B20UL GS Series Non-Fusible Transfer Switch; 200 Amp, 120/240 Volt AC, 2-Pole, NEMA 3R enclosure. Brand new in box. Midwest GS Series Non-fusible transfer switch can accommodate copper/aluminum wires of size 6 AWG - 250 kcmil.
Category- Double Throw Voltage- 120/240 AC Amperage- 200 A Poles- 2 Wires- 3 Fusing- No Fuse Enclosure- NEMA 3R (Outdoor) Options- None Height- 30.16 in Depth- 8.47 in Width- 13.27 in Weight- 38.0 lb Wire Range- (Cu/Al) 6-250 240 Vac, NEC Std, 3-ph 15 hp GSA Compliance- Yes CSA Certified- No UL Listed- Yes Designed for outdoor rural dwellings and farm buildings to allow connection to a standby generator. Listed to UL sta
Safety Switch, Fusible, Use Class H, K, R, T Fuse, General Duty, 60 Amps, Voltage 240VAC, 3 Phase, 10 HP @ 240VAC HP, 1 NEMA Enclosure Type, 20 IP Rating, Material of Construction Steel, Number of Wires 4, Number of Poles 3, Contact Form 3PST, Height 15.4 In., Width 8.7 In., Depth 8.6 In., Standards UL
Up for sale is an almost new Dayton 4Z527H DC speed control drive. It was purchased less than 2 months ago and has about an hour of run time on it. Below are the specs from Graingers website: Technical Specs Item: DC Speed Control Shunt Wound Volts: 100/200VDC Voltage Output: 90/180VDC Input Voltage: 115/230VAC Enclosure: NEMA 1 HP @ Higher Volts: 1/25 to 1/3
MARATHON MOTOR 5KCR46MN0093 1K128 GP Mtr, CS, TEFC, 1/2 HP, 1725/1425 rpm, 56C LAST ONE!!!! IN STOCK, Ships immediately!!! This is the CHEAPEST price ANYWHERE on a genuine part.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.