nema hp 3 for sale, brand-new and used.

Hubbell HBL5362 Listing Includes (1) New Hubbell HBL5362 Heavy Duty Specification / Hospital Grade Duplex Receptacle.

A.O. Smith motor – BLR6405 / BA42B04A01. 1/15 hp 1050 rpm /2 speed, 60 hz single phase 115 V.

NEW!!

NEW!! Qty = 2 at time of original listing, Magnetek, Century, A.O.

Hubbell HBL5362 Listing Includes (1) New Hubbell HBL5362 Heavy Duty Specification / Hospital Grade Duplex Receptacle. Hubbell HBL5362 Heavy Duty Specification / Hospital Grade Duplex Receptacle; 2 Pole, 3 Wire Grounding 15 and 20 Ampere, 125 Volts, 20 Amps PRODUCT DETAILS • Flush • Nylon Face • Back and Side Wire • Power Rating 1 HP • NEMA Configuration 5-20R

Up for auction is a Emerson/ Control Techniques Commander SX23400400PB VFD drive. 380/480 volts 3 phase 5 hp. This is a wash down VFD IP66 rated with a NEMA 4x rating.

This is our new line of low cost - better than the competition - magnetic starters. These are available in this configuration up to 20 HP @ 480V; 10 HP @ 230V 3-phase; 5 HP @ 230V 1-phase. Our motor starters use UL certified IEC type components.

This is our new line of low cost - better than the competition - magnetic starters. These are available in this configuration up to 20 HP @ 480V; 10 HP @ 230V 3-phase; 5 HP @ 230V 1-phase. Our motor starters use UL certified IEC type components.

Please call us if you have any questions. We want you to get the right equipment - 1-855-4Elimia. This is for a new enclosed magnetic motor starter with disconnect designed to start, stop and protect machines.

AO Smith 3/4 hp 1725 rpm 3 phase motor 230/460 volt B56 Frame – I believe this is unused, shelf worn, key is still taped to shaft. I have found the following link very helpful in matching NEMA frame specs and dimensions. http://www.engineeringtoolbox.com/nema-electrical-motor-frame-dimensions-d_1504.html I urge you to use this reference wherever possible to be sure you are getting the right motor.

GE Motor – Model 5K37MN38 – 3/4 hp 3540 RPM, 3 phase 208/460, Frame 56J, main shaft is .625 dia and 1.75” long. Threaded on the end for 3/8” fine thread about 3/4 ” long. 4 flange mounting screw holes 3/6” x 16.

Dayton branded 1/3 hp motor. 1725 rpm. Single phase 120 volt.

This is for a new Elimia Disconnect Switch for three phase or single phase loads. New premium pistol grip handle included as standard. NEMA 4X Polycarbonate enclosure with screw cover.

Mfr Brand Name: SQUARE D

This is our new line of LARGE FRAME low cost - better than the competition - magnetic starters. These are available in this configuration up to 50 HP @ 480V; 30 HP @ 208/230V 3-phase; 15 HP @ 230V 1-phase. Our motor starters use UL certified IEC type components.

This is our new line of LARGE FRAME low cost - better than the competition - magnetic starters. These are available in this configuration up to 50 HP @ 480V; 30 HP @ 208/230V 3-phase; 15 HP @ 230V 1-phase. Our motor starters use UL certified IEC type components.

This is our new line of LARGE FRAME low cost - better than the competition - magnetic starters. These are available in this configuration up to 50 HP @ 480V; 30 HP @ 208/230V 3-phase; 15 HP @ 230V 1-phase. Our motor starters use UL certified IEC type components.

This is our new line of LARGE FRAME low cost - better than the competition - magnetic starters. These are available in this configuration up to 50 HP @ 480V; 30 HP @ 208/230V 3-phase; 15 HP @ 230V 1-phase. Our motor starters use UL certified IEC type components.

This is our new line of LARGE FRAME low cost - better than the competition - magnetic starters. These are available in this configuration up to 50 HP @ 480V; 30 HP @ 208/230V 3-phase; 15 HP @ 230V 1-phase. Our motor starters use UL certified IEC type components.