New 5v Relay Cycle Timer Module * Plc Home Automation Delay

US $8.99

  • ??, ???, China
  • Jan 29th
The module's control side has three connections, DC+, DC-, and CH1 while the output side has three pins, NO (normal open), COM (common), and NC (normal closed), which are used depending on whether the relay is closed or open. 7. Limited cycle mode 1: T1 and T2 are adjustable between 0 seconds to 9999 seconds, and the cycle is selectable between 1 to 9999 times based on function 3. 8. Limited cycle mode 2: T1 and T2 are adjustable between 0 seconds to 9999 seconds, and the cycle is selectable between 1 to 9999 times based on function 4. This product is the new 5V Relay Cycle Timer Module for PLC Home Automation Delay. The module consists of eight different functions that can be selected and saved by using key buttons onboard. The set time is adjustable from 1 second minimum with a precision better than 0.1 second. 5. Self-lock relay mode: when CH1 is fed a high-level pulse signal, the relay closes. When it is fed again, the relay opens. 4. Cycle Mode 2: after power on, the relay immediately closes. It opens when T1 reaches and closes again when T2 reaches. When CH1 is fed a high-level pulse signal, the cycle repeats itself. 3. Cycle Mode 1: after power on, the relay does not close at first. It closes when T1 reaches and opens when T2 reaches, and so on. T1 and T2 can be adjusted between 0 seconds to 270 hours. When CH1 is fed a high-level pulse signal, the cycle repeats itself. The eight functions include the following: 1. Close upon the set time: after power on, the relay closes when the delay time T1 reaches. T1 can be adjusted between 0 seconds to 270 hours. When CH1 is fed a high-level pulse signal, the cycle repeats itself. 2. Disconnect upon the set time: when the relay closes, it opens when the delay time T1 reaches. T1 can be adjusted between 0 seconds to 270 hours. When CH1 is fed a high-level pulse signal, the cycle repeats itself. Payment for the product is only accepted through PayPal 6. Trigger relay mode: when CH1 is fed a high-level signal, the relay closes. When the signal is finished, the relay opens.

Directions

Similar products from Other Electronic Monitoring Devices & Assemblies

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies