New Genmark Gpr Vacuum Wafer Elevator, Asm Pn: 78-115406a49

US $1500

Phoenix, Arizona, United States
Jun 17th

Open on mobile:
QR code

Genmark GPR Vacuum Elevator, ASM Part Number: 78-115406A49 Comes with what you see in the pictures. If you don't see it, you probably wont get it. Specifications are from Genmark and may vary slightly due to upgrades, options, or revisions this unit may or may not have. This unit is NEW in the crate and came from ASM excess stock. The Unit's Serial Number Tag Reads: Serial Number: ELVH0806123 The ASM Description Is: Part Number: 78-115406A49 Description: Elevator-Vacuum-14.90 Inch Stroke, GPR Vacuum Elevator Description: The GPR Vacuum Elevator provides accurate, HV-compatible wafer indexing in vacuum processing capital equipment. The GPR Vacuum Elevators feature Genmark Automation’s breakthrough GPR technology, allowing a tilt of up to 1.5 degrees of the lifting platform. The GPR Vacuum Elevator provides vertical indexing with 16" [406 mm] (this unit is believed to be 14.90") travel, and it is capable to lift a load of up to 50 lb. Elevator translational mechanism is isolated from the atmospheric environment by using Ferrofluidic and magnetically-coupled seals. Features: Precise, high-resolution wafer indexing Cost-effective, seamless integration with the Genmark Automation Vacuum Robots HV-compatible – up to 10-8 torr Elevator Specifications: Axes of Motion: Z1, Z2, and Z3: Platform Elevation - First Elevator E1, E2, and E3: Platform Elevation - Second Elevator Ranges of Motion: 14.90" or 16.00" (This unit is believed to be the 14.90" Version) Maximum Tilt Angle: 1.5° Position Feedback: Optical differential incremental encoders Encoder Resolution: 2500 counts/rev. (quadrupled) Position Scaling Factor for Each Axis: 0.0001" Maximum Speed: 500 x 0.01"/sec = 5"/sec Maximum Acceleration: 500 x 0.01"/se = 5"/sec General Specifications: Repeatability (Constant Temperature): ±0.001" Maximum Vacuum: 10-10 Torr Payload: 50 lbs maximum Elevator Dimensions: Body Diameter: 14.125" Body Height: 25.00" - elevator with 16.00" vertical travel, 23.10" - elevator with 14.90" vertical travel Elevator Weight: 150 lbs. Materials: Aluminum & Stainless Steel Cleanliness: Class 1 clean room compatible Controller Specifications: Number of Axes Controlled: Three axes per motion control card Control Method: Multiple single axis servo system Typical System Configuration: Single Board Computer, LS421 GPR Motion Control Card (one per elevator), Flash ROM Disk Emulator with Optoisolated RS232 port Typical Controller Computer: Processor: 486 compatible processor board Computer RAM: 16 Mbytes Controller Dimensions: 17.0" x 17.5" x 7.0" Controller Weight: 25 - 40 lbs. Interface Requirement Specifications: Minimum Host Computer Requirements: One RS-232C port (Using Macros, the host computer can be disconnected for virtual stand alone operation of the elevator.) RS-232 Requirements: Cable: Configured for DTE device or Null Modem Baud Rates Supported by the Controller: 110, 150, 300, 600, 1200, 2400, 4800, 9600 Communication Specifications: 8 bit words, 1 stop bit, no parity Elevator to Controller Cable Length: 7.5 ft, 9.0 ft, 15.0 ft, 25.0 ft Power Supply Specifications: Input Power Requirements: 100-120 or 220-240 VAC ±10%, 50-60 Hz, 600 Watts (continuous) Input Power Fuse: 6A Switch Power Supply: +5 VDC 8.0 A (peak), +12 VDC 3.0 A (peak), -12 VDC 1.0 A (peak), +60 VDC 10 A (continuous) 16 A (peak) Component Requirements: Encoders: +5 VDC Brake: +24 VDC Limit Switches: +24 VDC Motors: +60 VDC $50.00 minimum for packaging, handling, and order processing. Shipping to be determined by destination. Prior to shipment I need to know the following information: (1) Are you the end-user of this item? (2) If you are not the ultimate end-user of the item, please state the ultimate end user's name. (3) What is the ultimate country destination? If you have any questions please call Michael at 1-866-MHZ-ELEC (1-866-649-3532) Toll Free. Also, please click here to view or other auctions! 07/12/11 Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage your active items.