New! Ortec Eg&g 550 Single Channel Analyzer Sca Nim Bin Crate Module Unsealed!

US $950.00

  • Sparta, Tennessee, United States
  • Jan 29th
The SCA OUT LED front-panel LED flashes whenever an SCA output pulse is generated. The module comes equipped with a front-panel, 10-turn, locking dial, which determines the window width (0 to 1 V) in the WINDOW modes, or the upper-level threshold (0 to +10 V) in the NORMAL and INTEGRAL modes. In addition, there is a front-panel, 10-turn, locking dial, which determines the threshold setting (+20 mVto +10 V) for the lower-level discriminator when the rear-panel LL REF switch is in the INT position. Meanwhile, the LOWER-LEVEL control is disabled when the EXT position is selected on the rear-panel LL REF switch. Indicators and Controls Inputs and Outputs Specifications and Performance We are proud to present the Ortec EG&G 550 Single Channel Analyzer SCA Nim Bin Crate Module - brand new and unsealed. This product has been purchased and stored by a local National Laboratory, but never used before. There is also a front-panel test point wired to the INPUT connector through a 470-?resistor and a rear-panel BNC connector identical to INPUT connector. Ortec EG&G 550 Single Channel Analyzer SCA Nim Bin Crate Module - New and Unsealed! The Ortec EG&G 550 Single Channel Analyzer SCA Nim Bin Crate Module features a front-panel BNC connector that accepts unipolar or bipolar linear signals for pulse amplitude selection in the range of +20 mV to +10 V (dc-coupled). The input impedance is approximately 1000?. The window width constancy variation is less than ±0.1% of full-scale window width over the +20 mV to +10 V linear input range. Meanwhile, the discriminator nonlinearity is less than ±0.25% of full scale for both discriminators. The front- and rear-panel BNC connectors provide a NIM-standard, positive logic pulse output: nominally +5 V amplitude and 500-ns width. The Ortec EG&G 550 Single Channel Analyzer SCA Nim Bin Crate Module boasts an impressive dynamic range of 500:1 and a pulse-pair resolving time of 100 ns plus output pulse width. The threshold temperature sensitivity is less than 0.01% of full scale per °C, from 0 to 50°C, using a NIM Class A powersupply (referenced to –12 V).
Condition New other (see details) :
A new, unused item with absolutely no signs of wear. The item may be missing the original packaging, or in the original packaging but not sealed. The item may be a factory second, or a new, unused item with defects. See the seller’s listing for full details and description of any imperfections.
Seller Notes NEW UNSEALED

Directions

Similar products from Plug-In Modules

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies