Niagara Cutter N79558 Cobalt Square Nose End Mill, TiCN, 5.5 x 1.25" Diameter, US $74.00 – Picture 0

Niagara Cutter N79558 Cobalt Square Nose End Mill, TiCN, 5.5 x 1.25" Diameter, US $74.00 – Picture 1

Niagara Cutter N79558 Cobalt Square Nose End Mill, Ticn, 5.5 X 1.25" Diameter

US $74.00

Los Angeles, California, United States
Jan 30th

Open on mobile:
QR code

Niagara Cutter N79558 Cobalt Steel Square Nose End Mill, Inch, Weldon Shank, TiCN Finish, Roughing Cut, 30 Degree Helix, 6 Flutes, 5.5" Overall Length, 1.250" Cutting Diameter, 1.250" Shank Diameter Product Specifications Mfr Part # N79558 Number of Items 1 UPC 698036795580 Cutting Diameter 1-1/4" Cutting Diameter 1.250 inches Cutting Length 3.000 inches EAN 0698036795580 Flute Length 3.000 inches Number of Flutes 6 Outside Diameter 1-1/4 inches Overall Length 5.5 inches Shank Diameter 1.250 inches Shank Width 1-1/4 inches Tolerance Held -0.0001/-0.0005" Specification for this product family Brand Name Niagara Cutter Material Type Cobalt Steel Finish Types TiCN Compatible Material All Materials Cut Type Roughing Cutting Angle 30 Degrees Cutting Direction Right Hand End Cut Type Center Cutting Manufacturer Series Number REC700 Shank Type Weldon Specific Uses For Product Profile Milling , Slot Milling System of Measurement Inch UNSPSC Code 27112803 Product Features Roughing end mills have chip-breaking cutting edges that remove material in less time than conventional end mills Coarse-pitch tooth design is suitable for machining soft, gummy materials Titanium carbon nitride (TiCN) coating lubricates the end mill for high-temperature stability and offers greater abrasion resistance than uncoated tools Cobalt steel resists abrasion and high cutting temperatures, and has higher feed rates than high-speed steel Square end creates sharp, unrounded cuts and has a corner chamfer to strengthen the cutting edges Product Description The Niagara Cutter REC700 TiCN-coated cobalt steel fine-pitch rougher end mill has a 30-degree helix and is suitable for machining soft, gummy materials such as aluminum or other nonferrous metals. The number of flutes varies by diameter to optimize the feed and cut rate. The coarse-pitch tooth design has chip-breaking cutting edges that remove more material in less time than conventional end mills to support heavier cuts at higher speeds. The end mill produces a rough finish that can be smoothed by a second finishing cut. The TiCN coating offers increased hardness and greater abrasion resistance than uncoated tools. The cobalt steel substrate can be run at faster speeds and stays sharp longer than high-speed steel tools, while offering resistance to heat and abrasion. Rougher end mills are special-purpose tools whose chip-breaking cutting edges create small chips for heavy cuts and remove more material in less time than conventional end mills, with minimal vibration (chatter). The 30-degree helix angle balances lower angles’ strong cutting edge for difficult-to-machine materials with higher angles’ increased cutting action. The tool’s square end creates sharp, unrounded cuts and has a corner chamfer on the cutting edges to provide more strength than standard square end tools in applications where cutting forces are high. The center-cutting design has cutting teeth at the end of the tool, so it can be fed into the workpiece like a drill bit, and used for applications such as slotting and profiling. Cutting diameter tolerance is +0.003” to -0.000" for cutting diameters 1” or under; +0.006” to -0.000” for cutting diameters over 1”. The end mill has a Weldon shank. End mills are designed to remove material and create multi-dimensional shapes and profiles. They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter. If heat is not reduced effectively, the tool’s cutting edges will dull and additional material buildup can occur. The number of flutes can range from two to eight. Two-flute designs offer the most efficient chip removal, but more flutes provide a smoother finish. The shank is the end of the tool held in place by a tool holder or machine. Center-cutting end mills can create three-dimensional shapes and profiles, and make plunge cuts similar to a drill bit. Non-center-cutting end mills are for applications such as peripheral milling and finishing, but cannot make plunge cuts. Niagara Cutter has been designing and manufacturing precision cutting tools since 1954. Specializing in end mills, cutting mills, and saws, the company is based in New York and manufactures its tools at facilities in Pennsylvania and Massachusetts. This allows the company control over production, from substrate to coating, which is essential for customers in a variety of industries, especially aerospace and automotive. *** If you choose to pay via PayPal I will ship only to confirmed addresses and accept payment from only US accounts *** *** BID WITH CONFIDENCE, CHECK MY FEEDBACK. ***

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Material	Cobalt
Flutes	6-Flute
Coating	TiCN
Helix Angle	30° Helix
End Type	Square Nose
Cutting Diameter	1.25in.
Brand	Niagara Cutter
Shank Diameter	1.25in.
Model	N79558
Overall Length	5.5"
UPC	698036795580