nickel brazing for sale, brand-new and used.

You are buying 5 rods (approximately 1.4+ ounces, oz) of EutecRod 1601 Low Temperature Silver Brazing Soldering/Welding Rod. Each rod is 18" long and 1/16" in diameter. Yellow tipped.

You are buying 1 pound (lb) of EutecRod 1601 Low Temperature Silver Brazing Soldering/Welding Rod. Each rod is 18" long and 1/16" in diameter. Yellow tipped.

At the time of this listing , we have 6 rolls of the exact same wire. $859 per roll (or Make Your Best Offer ! No Reasonable Offer Will Be Refused !) FREE SHIPPING ANYWHERE in the U.S.

*Please Read Before Bidding* Your are looking at HARRIS STAY-SILV 5 PHOS-COPPER SILVER BRAZING ALLOY (10 pieces) 19.5" x 1/8" x .050" Brand new. Payment due within 7 day from auction end date. Items will ship in 3-4 business days.

PACKAGE CONTAINS TWO KIND OF BRAZING RODS: HTS-528 Brazing Rod Its the Strongest Brazing Rod made for joining Cast Iron and Steel Perfect Rod to use for high-heat applications up to 1400 degrees. Details: Tensile Strength: 102,000 Elongation: 30% Boding Temperature: 1400 Degrees Farenheit Flow: Excellent

LOT OF TWO POUNDS HARRIS PHOS/COPPER BRAZING ROD 56 STICKS- .050" X 1/8" X 20" LENGTH, PART#21035 RODS NEW, IN PERFECT CONDITION, PACKAGING DISTRESSED FREE SHIPPING USING BUY IT NOW!! THANK YOU FOR LOOKING AND GOOD LUCK!! PLEASE TAKE A LOOK AT MY OTHER AUCTIONS!!

Low fuming bronze (bare and flux coated) is a general-purpose, copper base alloy brazing rod used extensively for gas brazing steel, copper alloys, cast iron, nickel alloys and stainless steel. Its low fuming characteristic and good mechanical properties make this alloy a widely used general-purpose product. Preheating is recommended for some applications and a bronze brazing flux is required if the rod is not coated.

12" nkl/slvr brazing rod. 12" brazing rod for use with oxygen torch kit and high temperature fuel torches. Nickel-silver flux-coated rods, braze steel, stainless steel, galvanized iron or steel, bronze and chrome plate, slightly lower melting temperature than bronze brazing rods.

SquareTrade © AP6.0 HARRIS Part# SSWF7 Sid# T720-54 Stay-Silv

LISTED IS A NEW 1 LB PACKAGE OF COPPER PHOSPHOROUS BRAZING ROD, 1/8’ DIAMETER X 18" LONG, GRAINGER #3AC23, BY BERNZOMATIC. Product •Phosphorus Copper Brazing Rod –Bare •1/16” diamx 12” •92.75% Copper (Cu), 7.25% Phosphorus (P) •Meets or exceeds AWS A5.8 BCuP-2; QQ-B-650B BCuP-2; ISO 3677: B Cu 93P 710-820; BS 1845 XP3; DIN 8513 LCuP7; NFA 81-362, 07 B1 requirements •Working Temperature Range: 1350°F -1550 °F •Applications: refrigeration, HVAC, plumbing, electrical •For use on: bron

HTS-528 Brazing Rods for any ferrous alloys like Cast Iron, Steel, Brass, Nickel, all hard surface alloys. The strongest brazing rod made for joining cast iron and steel, HTS-528 is thin flowing for close-fit joining and repairs on all cast iron, steel, copper, bronze, nickel, and brass. It also will effectively join dissimilar metals.

Low fuming bronze (bare and flux coated) is a general-purpose, copper base alloy brazing rod used extensively for gas brazing steel, copper alloys, cast iron, nickel alloys and stainless steel. Its low fuming characteristic and good mechanical properties make this alloy a widely used general-purpose product. Preheating is recommended for some applications and a bronze brazing flux is required if the rod is not coated.

5 Troy oz. Coil of Cadmium Easy-flo .094 Silver Alloy Brazing Wire***TEMPORARY PRICE DROP***Silver alloy for brazing ferrous, non-ferrous, and dissimilar metalsIron, steel, stainless steel, monel, inconel, everdur, copper, brass, bronze, copper-nickel, and chrome-nickel alloys, etc.Made by: Handy & Harman El Monte California

Wide selection of Soldering and Brazing Alloys, Soldering and Desoldering Equipment, DC Power Supplies and Jewelry Making Supplies