Norton Charger Flex Depressed Center Abrasive Wheel, Type 29, Aluminum Oxide

US $8.98

Summerville, South Carolina, United States
Jan 30th

Open on mobile:
QR code

Norton Charger Flex Depressed Center Abrasive Wheel, Type 29, Aluminum Oxide, 7/8" Arbor, 5" Diameter x 1/8" Thickness, Grit 36 (Pack of 1) Norton Charger Type 29 Flex depressed center wheels offer better control of finish quality and removal rate, and are commonly used for light stock removal. Reinforced wheels are designed to resist breakage caused by severe cross-bending and are required on any operation where the work is not securely clamped. Resin bonds are organic bonds that soften under the heat of grinding, releasing dulled abrasive grains. Because of its forgiving nature, only an organic type bond is used in cutoff wheels. The resin-bonded wheel is more resilient than a vitrified wheel. The manufacturing term for a resin bond wheel is "cured," meaning the wheel has been heated to less than 500 degrees F. Reversed saucer shape wheels have inset centers and back-flaring faces that are used for cutting off and portable grinding. The depressed center prevents the tool mandrel from gouging the workpiece. These wheels are typically used on concave workpieces at a slight angle with the workpiece. Depressed center wheels are frequently used with right-angle grinders. Using a harder grade wheel increases wheel life but also increases burn and requires more power, and decreases cut rate. Burn is the effect on a workpiece from thermal stress as abrasive cuts or rubs material away. The damage ranges from discoloration to cracking of the workpiece. Aluminum oxide is a widely used and versatile abrasive material. It is a tough, fracture- and wear-resistant grit that works well with a broad range of materials, from metals to wood. Aluminum oxide is more durable than silicon carbide and often used for material removal and finishing. Abrasives are used for a variety of applications from shaping a part to fine finishing, depending on the grit size. Low grit numbers like 40 are coarse and are used for removing excess material and shaping a part. High grit numbers like 400 are fine and help to create a smooth surface finish. Norton Abrasives manufactures a wide variety of sanding, grinding, and polishing abrasives, and has been located in the United States since 1885. In 1990, Saint-Gobain purchased Norton, keeping its manufacturing facilities and offices in the same location. Norton/Saint-Gobain has been recognized as a Global 100 Sustainable Company, as well as earning ISO 9000 and 14001 certification for quality and environmental management standards. Aluminum oxide is durable and the most common abrasive grain Type 29 reversed saucer-shape depressed center wheels are used for cutting off and portable grinding Reinforced design helps provide safety, strength, and straight cuts Resin bonds soften under the heat of grinding, releasing dulled abrasive grains Depressed center wheel for use on angle grinder while preventing gouging of the workpiece Product Specifications Part Number 66252833456 Grit Type 36 UPC 662528334564 Arbor Hole Diameter 7/8 inches EAN 0662528334564 Fastening Type Round Hole Max Rotational Speed 12225 RPM Number of Items 1 Outside Diameter 5 inches Size Name 5 inches Thickness 1/8 inches Call us at 1-843-261-9553 / 1-800-961-2124 or contact us via eBay with any questions.