+ Post new Ad
NUGIER 200 TON H FRAME PRESS 50" BETWEEN UPRIGHTS, AIR OPERATED, US $11,500.00 – Picture 0
NUGIER 200 TON H FRAME PRESS 50" BETWEEN UPRIGHTS, AIR OPERATED, US $11,500.00 – Picture 1
NUGIER 200 TON H FRAME PRESS 50" BETWEEN UPRIGHTS, AIR OPERATED, US $11,500.00 – Picture 2
NUGIER 200 TON H FRAME PRESS 50" BETWEEN UPRIGHTS, AIR OPERATED, US $11,500.00 – Picture 3
NUGIER 200 TON H FRAME PRESS 50" BETWEEN UPRIGHTS, AIR OPERATED, US $11,500.00 – Picture 4
NUGIER 200 TON H FRAME PRESS 50" BETWEEN UPRIGHTS, AIR OPERATED, US $11,500.00 – Picture 5
NUGIER 200 TON H FRAME PRESS 50" BETWEEN UPRIGHTS, AIR OPERATED, US $11,500.00 – Picture 0
NUGIER 200 TON H FRAME PRESS 50" BETWEEN UPRIGHTS, AIR OPERATED, US $11,500.00 – Picture 1
NUGIER 200 TON H FRAME PRESS 50" BETWEEN UPRIGHTS, AIR OPERATED, US $11,500.00 – Picture 2
NUGIER 200 TON H FRAME PRESS 50" BETWEEN UPRIGHTS, AIR OPERATED, US $11,500.00 – Picture 3
NUGIER 200 TON H FRAME PRESS 50" BETWEEN UPRIGHTS, AIR OPERATED, US $11,500.00 – Picture 4
NUGIER 200 TON H FRAME PRESS 50" BETWEEN UPRIGHTS, AIR OPERATED, US $11,500.00 – Picture 5

Nugier 200 Ton H Frame Press 50" Between Uprights, Air Operated

US $11,500.00

  • Pomona, California, United States
  • Jun 9th
Open on mobile:
QR code
  Wheeler Machinery Sales, Inc. 247 Pacific St Pomona CA 91768 Toll Free: 888-589-6721    Office: 909-348-5610 200 Ton, NUGIER, H-FRAME, 50" BETWEEN UPRIGHTS, AIR OPERATED, 20" STROKE   Our stock number: 3998  Specifications: Capacity.......................200 Tons Stroke.........................20" Distance Between Platens.......50" Width of Platen................14" Open Height Range..............12" - 49" Dimensions.....................90" x 50" x 98", 4,000 lbs Equipped With: Air Actuated Double Acting Cylinder Rolling Ram Positioning Adjustable Table Height
Condition:
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...
Brand NUGIER
MPN 200 TON
Model 200 TON

Directions

Similar products from Tools for Fabrication Equipment

CONRAC PRESSTAKER 020B-SA-500

CONRAC PRESSTAKER 020B-SA-500

  • Joplin, Missouri, United States
  • Jun 9th
Rowe Reel-Type Powered Uncoiler - Used - AM11331

Rowe Reel-Type Powered Uncoiler - Used - AM11331

  • Cleveland, Ohio, United States
  • Jun 9th
1/4" x 10' Amada Model M-3060 Mechanical Shear

1/4" x 10' Amada Model M-3060 Mechanical Shear

  • Kansas City, Missouri, United States
  • Jun 9th
CNC Strippit FC-750 Turret Punch Press

CNC Strippit FC-750 Turret Punch Press

  • Frenchville, Pennsylvania, United States
  • Jun 9th
VINTAGE STEEL STAMPS 1/8" LETTERS A TO Z w/ "&" and "." SYMBOLS - Dovetail Box

VINTAGE STEEL STAMPS 1/8" LETTERS A TO Z w/ "&" and "." SYMBOLS - Dovetail Box

  • East Windsor, Connecticut, United States
  • Jun 9th
DI-ACRO FINGER BRAKE NO.24 S#FB212

DI-ACRO FINGER BRAKE NO.24 S#FB212

  • Chicago, Illinois, United States
  • Jun 9th
New Zephyr Countersink Cages

New Zephyr Countersink Cages

  • Seattle, Washington, United States
  • Jun 9th
SUNEX Model 5250, Manual, 50 Ton H-Frame Press

SUNEX Model 5250, Manual, 50 Ton H-Frame Press

  • Pomona, California, United States
  • Jun 9th
GEKA 100 ton Ironworker Punch Shear Hydrocrop 100SD Lots of Tooling Included!

GEKA 100 ton Ironworker Punch Shear Hydrocrop 100SD Lots of Tooling Included!

  • Chicago, Illinois, United States
  • Jun 9th
165 Ton 144" Bed Haco SRM 165-12-10 NEW PRESS BRAKE, EasyBend Graphics 2D CNC

165 Ton 144" Bed Haco SRM 165-12-10 NEW PRESS BRAKE, EasyBend Graphics 2D CNC

  • Minot, North Dakota, United States
  • Jun 9th
WYSONG MECHANICAL POWER SQUARING SHEAR 1052 52" 10 ga (28848)

WYSONG MECHANICAL POWER SQUARING SHEAR 1052 52" 10 ga (28848)

  • Cincinnati, Ohio, United States
  • Jun 9th
ROUSSELLE #2 15 Ton OBI Punch Press 2" Stroke, Air Assisted Clutch

ROUSSELLE #2 15 Ton OBI Punch Press 2" Stroke, Air Assisted Clutch

  • Pomona, California, United States
  • Jun 9th
Greenerd #3A Arbor Press 3 tons w/ stand

Greenerd #3A Arbor Press 3 tons w/ stand

  • Davenport, Iowa, United States
  • Jun 9th
NIAGARA 189 CRIMPER BEADER ROLLER PEXTO BASE TINNSMITH SHEETMETAL FABRICATION

NIAGARA 189 CRIMPER BEADER ROLLER PEXTO BASE TINNSMITH SHEETMETAL FABRICATION

  • Lombard, Illinois, United States
  • Jun 9th
Manual Metal Pipe Bend Multipurpose Bending 180 Degrees w/ 6 Round 2 Square Dies

Manual Metal Pipe Bend Multipurpose Bending 180 Degrees w/ 6 Round 2 Square Dies

  • Erie, Michigan, United States
  • Jun 9th
Air Feeder & Straighnter

Air Feeder & Straighnter

  • Holland, Ohio, United States
  • Jun 9th
Dallas Coil Cradle & Straightener SN 16858

Dallas Coil Cradle & Straightener SN 16858

  • Holland, Ohio, United States
  • Jun 9th
PEXTO Model 383 SLIP ROLL 2' x 20 ga

PEXTO Model 383 SLIP ROLL 2' x 20 ga

  • Pomona, California, United States
  • Jun 9th
Pexto 925 Blow horn Stake (Peck Stow & Wilcox Co. Southington, Conn.)

Pexto 925 Blow horn Stake (Peck Stow & Wilcox Co. Southington, Conn.)

  • Durham, Connecticut, United States
  • Jun 9th
Pexto Niagara Tinners Conductor Stake not marked, 1 1/4 Dia. 35" long

Pexto Niagara Tinners Conductor Stake not marked, 1 1/4 Dia. 35" long

  • Durham, Connecticut, United States
  • Jun 9th

People who viewed this item also vieved

H & G 102 DH CARRIER SET 1-1/32"-1-1/4" LEFT HAND

H & G 102 DH CARRIER SET 1-1/32"-1-1/4" LEFT HAND

  • Cadiz, Kentucky, United States
  • Jan 30th
H & G 103 DH SERIES CHASER BLOCKS 1-1/32"-1-1/4" LEFT

H & G 103 DH SERIES CHASER BLOCKS 1-1/32"-1-1/4" LEFT

  • Cadiz, Kentucky, United States
  • Jan 30th
H & G 103 DH SERIES CHASER BLOCKS 1-1/32"-1-1/4"

H & G 103 DH SERIES CHASER BLOCKS 1-1/32"-1-1/4"

  • Cadiz, Kentucky, United States
  • Jan 30th
5HP Spdl Victor KY-27VS DRILL PRESS, 6-3/8" Dia., 7.5" Spdl Strk, Vari. Spd

5HP Spdl Victor KY-27VS DRILL PRESS, 6-3/8" Dia., 7.5" Spdl Strk, Vari. Spd

  • Harrison, New Jersey, United States
  • Jan 30th
0.25" Dia. Cap Snow TA-1-A TAPPING MACHINE

0.25" Dia. Cap Snow TA-1-A TAPPING MACHINE

  • Harrison, New Jersey, United States
  • Jan 30th
Moore CABINET WITH TOOLING JIG BORER

Moore CABINET WITH TOOLING JIG BORER

  • Harrison, New Jersey, United States
  • Jan 30th
Mitsubishi .0205 Diamond Guide Head Only

Mitsubishi .0205 Diamond Guide Head Only

  • Wilmington, Ohio, United States
  • Jan 30th
Mitsubishi .0205 Diamond Guide

Mitsubishi .0205 Diamond Guide

  • Wilmington, Ohio, United States
  • Jan 30th
EDC30UK Drill EDM Chuck with KEY 0.3 - 3.0mm

EDC30UK Drill EDM Chuck with KEY 0.3 - 3.0mm

  • Irvine, California, United States
  • Jan 30th
SUNNEN Honing Stone P28NM85 |IY3|

SUNNEN Honing Stone P28NM85 |IY3|

  • Saint Louis, Missouri, United States
  • Jan 30th
NEW! SUNNEN HONING MANDREL HONING STONES K20 J57

NEW! SUNNEN HONING MANDREL HONING STONES K20 J57

  • Chino, California, United States
  • Jan 30th
NEW! SUNNEN HONING MANDREL GUIDE SHOES UB B DDD

NEW! SUNNEN HONING MANDREL GUIDE SHOES UB B DDD

  • Chino, California, United States
  • Jan 30th
12" W 24" L Jones & Shipman 1430 SURFACE GRINDER, AUTO IDF, 3X AUTO FEEDS, EMC,

12" W 24" L Jones & Shipman 1430 SURFACE GRINDER, AUTO IDF, 3X AUTO FEEDS, EMC,

  • Harrison, New Jersey, United States
  • Jan 30th
14" Swg 30" cc Brown & Sharpe 2 OD GRINDER, ID att., hyd. Tbl, auto infeed, AUTO

14" Swg 30" cc Brown & Sharpe 2 OD GRINDER, ID att., hyd. Tbl, auto infeed, AUTO

  • Harrison, New Jersey, United States
  • Jan 30th
8" W 18" L Gallmeyer & Livingston 260 SURFACE GRINDER, auto idf, 3x auto feeds,

8" W 18" L Gallmeyer & Livingston 260 SURFACE GRINDER, auto idf, 3x auto feeds,

  • Harrison, New Jersey, United States
  • Jan 30th
South Bend Gear for 9” and 10K Lathe Quick Change Gearbox #PT628NK1

South Bend Gear for 9” and 10K Lathe Quick Change Gearbox #PT628NK1

  • Unionville, Pennsylvania, United States
  • Jan 30th
South Bend Gear for 9” and 10K Lathe Quick Change Gearbox #AS605NK1

South Bend Gear for 9” and 10K Lathe Quick Change Gearbox #AS605NK1

  • Unionville, Pennsylvania, United States
  • Jan 30th
HARDINGE HLV-H Lathe PARTS LIST, MAINTENANCE MANUAL, OPERATER OWNER MANUAL Lot

HARDINGE HLV-H Lathe PARTS LIST, MAINTENANCE MANUAL, OPERATER OWNER MANUAL Lot

  • Union, Missouri, United States
  • Jan 30th
Kearney & Trecker TRI D Milling Machine HEAD K&T

Kearney & Trecker TRI D Milling Machine HEAD K&T

  • Coloma, Wisconsin, United States
  • Jan 30th
MOON - SIDE MILLING CUTTER- 4 x .261 x 1, USA

MOON - SIDE MILLING CUTTER- 4 x .261 x 1, USA

  • McKee, Kentucky, United States
  • Jan 30th
NIAGAGA CUTTER - STRAIGHT SIDE MILLING CUTTER -3 X 1/2 X 1 , NOS, USA,

NIAGAGA CUTTER - STRAIGHT SIDE MILLING CUTTER -3 X 1/2 X 1 , NOS, USA,

  • McKee, Kentucky, United States
  • Jan 30th
CDI TORQUE PRODUCTS, TORQUE WRENCH, 6004MFRMH, 3/4 DR, 100-600 FT.LB, NEW

CDI TORQUE PRODUCTS, TORQUE WRENCH, 6004MFRMH, 3/4 DR, 100-600 FT.LB, NEW

  • Coffeyville, Kansas, United States
  • Jan 30th
CDI TORQUE PRODUCTS, TORQUE WRENCH, 1503MFRMH-QR, 1/2 DR, 20-150 FT.LB, NEW

CDI TORQUE PRODUCTS, TORQUE WRENCH, 1503MFRMH-QR, 1/2 DR, 20-150 FT.LB, NEW

  • Coffeyville, Kansas, United States
  • Jan 30th
MSC (HARDINGE-TYPE) DSM-59 SECONDAY OPERATION LATHE-1996 - Lin Huan Valuemaster

MSC (HARDINGE-TYPE) DSM-59 SECONDAY OPERATION LATHE-1996 - Lin Huan Valuemaster

  • Pawtucket, Rhode Island, United States
  • Jan 30th
Vertical Bandsaw - Model BAV-450

Vertical Bandsaw - Model BAV-450

  • Sterling Heights, Michigan, United States
  • Jan 30th
Eisele,12" Cold Saw 440v VMSIIIPV

Eisele,12" Cold Saw 440v VMSIIIPV

  • Glassboro, New Jersey, United States
  • Jan 30th
Grob vertical band saw

Grob vertical band saw

  • Fort Wayne, Indiana, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies