NuSafe ABOVE GROUND Tornado/Storm Shelter Kit - Designed for 250 MPH Wind,, US $3,335.14 – Picture 0

NuSafe ABOVE GROUND Tornado/Storm Shelter Kit - Designed for 250 MPH Wind,, US $3,335.14 – Picture 1

NuSafe ABOVE GROUND Tornado/Storm Shelter Kit - Designed for 250 MPH Wind,, US $3,335.14 – Picture 2

NuSafe ABOVE GROUND Tornado/Storm Shelter Kit - Designed for 250 MPH Wind,, US $3,335.14 – Picture 3

NuSafe ABOVE GROUND Tornado/Storm Shelter Kit - Designed for 250 MPH Wind,, US $3,335.14 – Picture 4

NuSafe ABOVE GROUND Tornado/Storm Shelter Kit - Designed for 250 MPH Wind,, US $3,335.14 – Picture 5

NuSafe ABOVE GROUND Tornado/Storm Shelter Kit - Designed for 250 MPH Wind,, US $3,335.14 – Picture 6

NuSafe ABOVE GROUND Tornado/Storm Shelter Kit - Designed for 250 MPH Wind,, US $3,335.14 – Picture 7

NuSafe ABOVE GROUND Tornado/Storm Shelter Kit - Designed for 250 MPH Wind,, US $3,335.14 – Picture 8

Nusafe Above Ground Tornado/storm Shelter Kit - Designed For 250 Mph Wind,

US $3,335.14

Sunnyside, Washington, United States
Jan 30th

Open on mobile:
QR code

NSF609 NuSafe Storm Shelter Free Standing Requires CECO StormPro 361 Door (sold Separately) Total sqft: 54.5 CSC Building Systems introduces the NUSAFE storm shelter which is designed to withstand wind speeds up to 250mph. NUSAFE is your solution for keeping family and friends protected during nature’s most violent storms. This storm shelter features CSC Building System’s NUSAFE Panel System designed to withstand windborne projectiles up to 150 mph. NUSAFE panels have been tested by a nationally recognized Wind Science and Engineering Research Center. The NUSAFE Steel Panel System has proven effective for use in above ground shelter construction as required by FEMA 320 publication “Taking Shelter from the Storm” and FEMA 361 “Design and Construction Guidance for Community Shelters.” Matched with the required Ceco Stormpro 361 door (sold separately) NUSAFE is a force to be reckoned with. What is included in this CSC Building Systems, NuSafe Kit? 1. Complete Architectural and Structural Drawings 2. Licensed Engineer’s structural certification of the drawings and design 3. Assembly drawings for the wall panels and trusses 4. NuFrame Galvanized Steel Stud wall framing studs and track including: a. Top and bottom tracks are part-marked, cut to length, and pre-punched for all stud and jam connections. b. Studs part-marked, pre-cut and pre punched for connection to track, blocking, bracing, and framed openings c. Blocking is part-marked, pre-cut and pre-punched for easy assembly between studs. d. Door jams and headers are part-marked, pre-cut and pre-punched e. Window jams, headers, and sills are part-marked, pre-cut and pre-punched f. Diagonal bracing (if required) is part-marked, pre-cut and pre-punched for required wall panels g. The walls are divided into 8’ to 12’ sections, part-marked and packaged individually for assembly and easy handling. h. An assembly diagram for each wall section identifying the location of each part-marked component in the section assembly. i. All rivets, self-drilling screws, and angle clips required for assembly of the building frame. 5. NuFrame Galvanized Steel Stud Roof framing (if used) a. Top and bottom tracks are part-marked, cut to length and pre-punched for all rafter connections. b. Rafters are part-marked, pre-cut and pre-punched for connection to track, blocking, bracing. c. Blocking is part-marked, pre-cut and pre-punched for easy assembly between rafters. d. The roof framing is divided into 8’ to 12’ sections, part-marked, and packaged individually for assembly and easy handling. e. An assembly diagram for each roof section identifying the location of each part-marked component in the section assembly. f. All rivets, self-drilling screws, and angle clips required for assembly of the building frame. 6. Wall and Roof a. 14 Ga. Galvanized steel sheeting is included for the walls and the roof. b. Self-drilling fasters to attach the 14 Ga. sheeting to the walls and roof. c. Base anchors and anchor bolts are included What do you provide? 1. Foundation or floor engineering and installation. 2. Two layers of 3/4 ” plywood for the walls and the roof 3. Finish siding and roofing, if desired. 4. A CECO StormPro 361 storm door. An Excel Spreadsheet listing the types and quantities of finishing materials, that are supplied by the owner, is available free along with a PDF set of plans by calling 509 837 4650. CSC BUILDING SYSTEMS presents the NUPRODUCTS line which includes fully designed and pre-engineered standard model steel framing packages suited to fill any homeowner or entrepreneur’s needs. Your steel framed package includes wall panels and trusses, including window and door openings that are precision-cut and precision-punched for easy, self-squaring, field assembly. When building with steel, you receive a safer and stronger product that will not contribute fuel to the spread of fire and is termite resistant. All NUPRODUCTS lines are produced with our NUFRAME® and NUTRUSS 3.0® Automated Framing Systems which provide a total light gauge cold formed steel solution for panels and trusses. Explore our line of innovative lifestyle designs and find the perfect home, shed, garage, horse barn, and more. The Constructive Green Choice! Steel is Stronger • Safer • Smarter The strength to weight ratio of steel is the highest in the home building industry. This is a distinct advantage, especially when there are extreme demands on structural engineering, like the high winds coming off the gulf coast. The NUSHELTER suite of products combine state-of-the-art design, engineering and layout software with rock-solid steel profiles. CSC BUILDING SYSTEMS has performed all the extensive engineering required to simplify and minimize the amount of steel and labor needed to adequately frame each model and pass or exceed code requirements. With the extra wind load requirements of some areas in the Gulf Coast region these NUSHELTER homes come standard with either 110 mph or 150 mph wind loads . For more information on our NUPRODUCTS lines call 509-837-4650. Frequently Ask Questions: Q: Does the NUPRODUCT come complete as shown in the pictures? A: CSC BUILDING SYSTEMS provides a complete light gauge steel framing system that includes the precision-cut and precision-punched components for the wall panels, roof trusses, floor trusses (where applicable), clips, framing angles, and fasteners necessary to erect the light gauge steel frame for the model you select. The picture shown in the brochure is an architect’s rendering of what the house or building could look like using certain types of finish materials that are left up to the customers choosing Q: Can I erect the frame myself? A: Certainly you may erect the frame yourself. Many customers choose to do just that. However, many customers also choose to hire an experienced general contractor or framer to provide this service as well. The choice is up to you Q: Does it come with assembly instructions? A: Yes. Your purchase of any NUPRODUCT comes complete with the Architectural and Structural plans detailing assembly instructions, wall panel locations, truss layouts, and connection details necessary to complete the erection of your light gauge steel frame. Q: Do you provide the foundation plan for the NUPRODUCT? A: Due to varying local soil conditions and area building practices you will need to have a Professional Engineer familiar with your area design the foundation. CSC BUILDING SYSTEMS provides a building footprint found within the architectural plans that your Engineer may reference. Q: Will the NUPRODUCT pass my local building codes? A: CSC BUILDING SYSTEMS has designed and engineered the NUPRODUCTS lines to meet most local building code requirements around the United States. See the Where Can I Build link on each model page for a map of geographic design restrictions that will get you on your way to determining whether the NUPRODUCT model you have selected is designed to meet your areas requirements. Always check with your local building officials for the exact codes and restrictions in your area Q: Can you use Romex electrical wire in steel framed structures? A: Yes. You can use Romex as long as you use grommets in the pre-punched holes or field cut holes (Greenlee punch). You will also need to use all plastic electrical boxes. There is documentation in the building code approving this application Q: Will the steel in my frame rust? A: Inside the walls and roof of a home or structure where the steel is not constantly wet your steel frame will be very resistant to rust and corrosion. The reason is that zinc, through its sacrificial galvanic action, can “heal” cuts, scratches, and abrasions in the steel. The Steel Framing Alliance has done a study that can be viewed on the internet. The results of this study show that industry standard galvanization has life expectancy as high as 1260 years and that the fastest coating corrosion rate observed equated to a life expectancy in excess of 200 years Q: Will steel framing affect the indoor air quality of my home? A: The Healthy House Institute recommends steel framing for chemically sensitive and environmentally conscious homeowners who are seeking the best possible indoor air quality. Curfman Steel Corp. dba CSC Building Systems is an authorized fabricator for NBS-LGT, Nucor Building Systems Light Gauge Technology. NuShelter, NuBuildings, NuGarage, NuShed, NuEquestrian, NuSafe, NuFrame, NuTruss, NuProducts are registered trademarks of NBS-LGT. Used by Permission

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	CSC Builidng Systems
Country of Manufacture	United States
Model	NSG609 NuSafe Storm Shelter