nut tap for sale, brand-new and used.

-D4743ST-NEW made in the U. S . A.

-D4740SK- New - Commercial grade Made is the U . S. A.

1 3/4" Draft Beer Nipple Shank Assembly Chrome 3/16 Bore Kegerator Tap Homebrew Brand New Beer Faucet Shank, Includes panel nut, Balck plastic flange and Faucet connector. Chrome plated brass with nipple1-3/4" long shank3/16" bore Packing: 1pc 1-3/4" long shank

Keg Beer Tap (coupler) Elbow Keg Beer Tap (coupler) Elbow Description If you have a tight clearance issue, the 90 degree coupler elbow will help prevent a kinked line. Can also be screwed on the back of a shank or jockey box to reduce clearances. Comes with one neoprene beer nut washer.

qnt

(ALL POTS I SELL, NEW OR USED, ARE TESTED GOOD AND GUARANTEED) THIS ITEM IS FOR 1 (one): ALLEN-BRADLEY TYPE J LONG SHAFT, DUAL WITH TAP 500 OHM DUAL WITH TAP 2 WATT POTENTIOMETER MARKED: JD1N200P501CA LINEAR TAPER, WITH 50% CENTER TAP DIM: 1 1/8" DIA X 1 1/4" BEHIND PANEL VOLTAGE: 500 RMS

Nice New Guinness/Harp Draft Beer Keg Taps, They Have Some Nicks/Scratches But Have Never Been Used And Include Gas Nut/Tail Piece MADE IN USA

Comes with a back nut, plastic collar, hex nut, and a 1/4" barb. Requires a 7/8" hole saw for installation Entirely SS except for black plastic collar

Z AXIS for CNC PLASMA,OXY OR SMALL ROUTER Z AXIS FOR PRECISION 3D PRINTER Perfect for DLP printer (look the last picture) 4 inchs travel *****NEMA 17 MOTOR INCLUDED 76 OZ/IN 1.5A/ph***** You can mount your NEMA 23 MOTOR you reverse the motor plate, screw (2 M4 screws included) in the two M4 hole and re-drill the couplint to 1/4" half way and v

Z AXIS for CNC PLASMA,OXY OR SMALL ROUTER Z AXIS FOR PRECISION 3D PRINTER Perfect for DLP printer (look the last picture) MADE FROM ALUMINUM PLATE 4 inchs travel

Z AXIS for CNC MILL ROUTER WORK REALLY WELL WITH ARDUINO Build your own Cnc mill, 3D printer or routerwi

Stainless Steel Iced Beverage Wine Beer Dispenser Replacement Spigot Faucet 16mm Feature: Brand new and high qualityStainless Steel Beverage Dispenser or Wine Barrel.Be a good dispenser for wine, water and other beverage. Wash before use.Wash before use. If necessary, use 3/4 inch wrench for the nut, do not over-tighten.Please do not be used as a water tapDo not over-tighten Clean thoroughly after each use, keep in open position for storage.

3 1/2" Draft Beer Nipple Shank Assembly Chrome 3/16 Bore Kegerator Tap Homebrew Brand New Beer Faucet Shank, Includes panel nut, Balck plastic flange and Faucet connector. Chrome plated brass with nipple3-1/2" long shank3/16" bore Packing: 1pc 3-1/2" long shank