oil fit for sale, brand-new and used.

May be used as a spindle-adapter for a wood lathe from LatheCity Morse Taper #3 two in one

**BEFORE YOU BID READ THE PAYMENT INFO AT THE BOTTOM ** Turner Bandsaw Mill Bought in 2008 NEW from manufacture. Was used semi-regularly for a couple of years, since then used a few times. Head/motor has always been kept under a cover, and for the last 3 years in a barn.

Jet part # BB-6204ZZ. gearbox arbor bearing. One side is sealed and the gearbox side is open for the oil bath.

This Clifton 400 shoulder rebate plane is a delicate plane with a fine mouth that will cut fine shavings for precision work. The body is machined from quality grey iron casting, accurately machined and precision ground on the sole and sides. The cutting iron seats smoothly onto the machined pads, and fits snugly into the body of the plane and held is by a Rosewood wedge.

This CLIFTON 770 bull-nose plane fulfills the need for a straight-forward bull nose plane enabling the user to plane close to an abutting section of wood and avoiding tear-out. It is a light and useful plane often used for cutting rebate stop shoulders. The body is machined from quality grey iron castings and is precision ground on the soles and sides.

This is a 24" Delta Invicta planer made in 2001 everything functions correctly. This planner has seen very little use. It was used by a large business in the maintenance department to make repairs in house and was never used for production.

Industrial model, Ball Screws on all axis and over 100 inches per min travel. This is a 24"x 24" x 4.5" CNC. It's milled from 6061 aluminum, 20 mm rods, two precision forged double bearing blocks, and an oil flush connector on each axis.

Ident Brand Description Length Used in: 304050 Made in USA 5/8-8 precision Acme leadscrew Single Start Low Carbon Steel Oil Finish, Right hand 6 foot CNC machine axis drives This is new stock. Each revolution of the screw moves .125 inch linearly. Accurate to .009 inch / foot

Commercial model, Ball Screws and 25mm Rail & Carriages on all axis. Special Pricing reg $4995.00 This is a 24"x 49" x 4" CNC. It's milled from single sheet of 6061 aluminum, not forged pot metal and ground to fit then covered with tin.

Commercial model, Ball Screws and 25mm Rail & Carriages on all axis. Special Pricing reg $4595.00 This is a 24"x 24" x 4" CNC. It's milled from single sheet of 6061 aluminum, not forged pot metal and ground to fit then covered with tin.

1998 VENJAKOB HGS-Z LACQUER LINE WITH SPRAY APPLICATOR ENCLOSURE, LACQUER RECOVERY SYSTEM, 101'X52" (32.7 M X 132 CM) DRYING TUNNEL AND CONTROLS. IN GOOD WORKING CONDITION. Please watch this video, you can see how line is working: http://www.youtube.com/watch?v=QSsb2Jo4A3M Finishing line for staining and painting wooden panels

Pelton Crane 840C / 420C Dental Compressor Head a.imagelink {color:#000000;} a:hover.imagelink {color:#000000;} a:visited.imagelink {color:#ffffff;} a.imagelink img.auctionimage { bor

MDT/McKesson Dental Compressor Copelametic Head. This is a replacement head for an 230v McKesson oil lubricated dental compressor. This compressor head has been minimally tested and is in good working order.

MDT/McKesson Dental Compressor Copelametic Head. This is a replacement head for an 230v McKesson oil lubricated dental compressor. This compressor head has been minimally tested and is in good working order.