opaque bag for sale, brand-new and used.

Magnaflux SKD-S2 Developer ; Brand New. 8 cans available.

Part Number NFG-2781-CSystem of Measurement InchInside Diameter 0.813 inchesOutside Diameter 1.000 inches

BLACK OPAQUE TOP SHEETS 60" x 60" x 1.5mil (centerfolded0 150 covers per roll 1 roll per case. *YOU ARE BUY A TOP SHEET ONLY - COMES DOWN THE SIDES OF THE PALLET ABOUT 10" ONLY* Top Sheeting Pallet Covers to protect your pallet loads from dirt, dust or particles that can cause damage to your pallet. Pallet top sheeting covers are an easy and simple way to protect pallet tops from debris or particles so that your pallet shipments arrive as expected.

These bags are extremely durable! They are made of strong Mylar and have a single layer thickness of 3.6 Mil, providing protection from moisture and light. The bags have a reclosable zipper top and can be made tamper proof with a heat sea

Opened case of 1000 3x5 mylar opened end food safe bags (ULINE S-11660). Estimated about 900+ left in original factory box. All new and unused as pictured.

Opened case of 1000 8x10 recloseable mylar food safe bags (ULINE S-16896). Estimated about 800-900 left in original factory box. All new and unused as pictured.

Opened case of 1000 4x6 recloseable mylar food safe bags (ULINE S-16894). Estimated about 800-900 left in original factory box. All new and unused as pictured.

NEW IN SEALED BAGM52-Joint Service Chemical Environmental Survivability Mask (JSCESM) DoD Qualified/ApprovedNSN 4240-01-517-8455Part of the JPM-IP Product Portfolio The M52 JSCESM is a commercial off-the-shelf, lightweight, low bulk, short duration protective mask/hood capable of providing warfighters with above the neck, respiratory and ocular protection against low-level threat Chemical, Biological, Radiological, and Nuclear (CBRN) attacks.

RAYTECH Ceramilite Vibratory Media - Model: 41-346 ANG.CUT CERLITE 20LBVIBE RAYTECH Applications

New in the box 35 1/2 x 5/8 Teflon rods .

US SELLER - Ships in 24 Hours 5 Pack Black #2025 Cast Acrylic 0.118 Thick 12 x 12 (Opaque Reflective Finish) *Due to the saw blade kerf please allow + 0.000 or - 0.177 tolerance in width and length. Actual Thickness will range from 0.110 - 0.118 Approx length and width 11.850" x 11.850"

US SELLER - Ships in 24 Hours Black #2025 Cast Acrylic 0.118 Thick 12 x 12 x 1/8" (Opaque Reflective Finish) *Due to the saw blade kerf please allow + 0.000 or - 0.177 tolerance in width and length. Approx length and width 11.850 x 11.850 in. 1/8 Thick.

AUCTION IS FOR ONE NEW WHITE CAST ACRYLIC PLEXIGLASS SHEET 25 1/2" x 25 1/2" x 1/8" thick. CHECK ON MY LISTINGS FOR OTHER COLORS & SIZES !!!

You are buying 2 (TWO) sheets of WHITE TRANSLUCENT ACRYLIC. The size of these sheets are 8" x 11" and 1/4" (.220") thick. (Eight inch by Eleven inch by quarter inch thick) The picture shows 1 quarter inch thick white translucent sheet for representation of our product but you are buying and will receive TWO 8" x 11" x 1/4" sheets.

You are buying one piece of Black Opaque acrylic plexiglass sheet with paper masking on both side for protection. Sheet Thickness: 1/4" (.236")Sheet Size: 12" x 24" Acrycast

AUCTION IS FOR ONE NEW PINK CAST ACRYLIC PLEXIGLASS SHEET 25 1/2" x 25 1/2" x 1/8" thick. CHECK ON MY LISTINGS FOR OTHER COLORS & SIZES !!!

AUCTION IS FOR ONE NEW GREEN CAST ACRYLIC PLEXIGLASS SHEET 25 1/2" x 25 1/2" x 1/8" thick. CHECK ON MY LISTINGS FOR OTHER COLORS & SIZES !!!

Brand new custom cut G-10 Fiberglass plates, 14" x 11.7/8" x 1/2" thick weight of this plate is app. 5.95 lbs Front and back both side is very clean. All 4 corners are clean and sharp as shown in the photo # 2, This item is heavy about 5.95 lbs and it is not economical to ship overseas including Canada.

Brand new custom cut G-10 Fiberglass plates, 1pc assorted size 18" x 16" x 1/2" thick , weight of this plate isapp. 5 lbs. Front side of this plate (1st picture from left) is very clean and look new except there are two holes on the edge of plate shown in 1st photo .

THIS FILM IS NOT AMBER AND TRANSLUCENT IT IS A YELLOW OPAQUE IN COLOR ALL OTHER PROPERTIES ARE THE SAME ITEM SHIPS FROM OUR INDIANA OFFICE WAVE SOLDER MASKING , ELECTRICAL INSULATION Heat resistant to 750 degrees F. Great insulator for transformers, tesla coils,Hi-voltage,microwave windows,dielectric for screen and plate bypass capacitors in uhf amplifiers,thermal conductor.Will not cold flow like teflon.Very high dielectric strength.