Optex Redwall Rednet Intruder Detection Security System, 16 Ir/infrared Beams

US $1100

Yelm, Washington, United States
Nov 18th

Open on mobile:
QR code

This is a 16 beam infrared intruder detection system consisting of four transmitters, four receivers, and the associated electronics, alignment aids, instructions Etc. It has a range of 10-25 meters (about 33-82 feet). It does not include the required mounting towers, which are readily available online, or could easily be fabricated. From Optex: REDNET RN4-10-25 / 25-75 / 75-150 Infrared Photoelectric Beam Production is discontinued and it is not available anymore The Rednet Series of photobeams is a range of active infrared detectors designed to combine high levels of intruder detection with a low potential for false activation. The system utilises the infrared transmission to synchronise transmitters and receivers and removes the need for hardwire synchronisation cables between towers. RN4 systems feature four high power transmitters and four receivers. Uniquely, each transmitter operates to all receivers and all receivers are operated by all transmitters. This combination creates a sixteen beam path ‘net’ which is difficult to compromise. REDWALL IP series PIE-1 RAPID REDFIBER RBM-60QN-IP RBM-100QN-IP RBM-200QN-IP RLS-3060SH-PoE RLS-3060L-PoE SIP-3020-IP SIP-4010-IP SIP-404-IP SIP-3020/5-IP SIP-4010/5-IP SIP-404/5-IP SIP-5030-IP SIP-100-IP REDSCAN series RLS-3060SH RLS-3060L REDWALL-V series SIP-3020 SIP-4010 SIP-404 SIP-3020/5 SIP-4010/5 SIP-404/5 SIP-5030 SIP-100 SIP-3020WF SIP-4010WF SIP-404WF SIP-3020CAM DN REDWALL series LRP-4010S LRP-3020S LRP-404S LRP-5030S LRP-180QH LRP-100QS WF-4010S WF-3020S WF-404S MRP-3050S CAM MRP-3050S CAM DN REDNET series RN4-10-25 / 25-75 / 75-150 FEATURES Sixteen active beams Graded alarm responses No hardwire synchronisation Integral head heaters Modular system design Field adjustable detection levels Up to 150m outdoor range Alignment tester included Fog detection circuitry SYSTEM DESIGN The Rednet system is simple to design and install as it is modular and has just five main components. To design a system, simply decide where the towers are to be positioned and measure the distance between these points. Choose the wall (RNW 175) or free-standing (RNT 175) towers and select the correct beam set for the distances between them. Towers come complete with all fixings and the electronics include heaters, thermostats, fixings and alignment aids. BEAM HEAD The Rednet beam head contains a folded optical array to combine a long focal length with small head size. This creates narrow transmission and receiving angles to maximise performance. The heads also contain their own heater to ensure that the maximum amount of energy is directed to the section of the tower the beams operate in. BEAM SETS INCLUDE Heaters Thermostats Four Transmitters pre-wired to transmitter controller Four Receivers pre-wired to receiver controller RN Tester Optical alignment viewer Blanking plates Tamper Switch and Fixing Kit We deliver towers of 200cm or 300cm heithh, preassembled with beams, power supply, wires, heaters and thermostats, board of relays and other accessories. Please consult with our distribitors for configuration. Accessories: TWEB Floor bracket to set into concrete TWAA Anti-climb top tamper kit TWSTB Stabilization bracket for towers 300cm height TWCAB Stabilization cables for towers 300cm height BEAM CONFIGURATION DIMENSIONS Foot plate entries SPECIFICATION Model RN4-10-25 RN4-25-75 RN4-75-150 Detection method Infrared Beam Interruption Detection Detection range 10m -25m 25m - 75m 75m - 150m Power supply 12V DC (11 - 15V DC) Power supply (heater) 10 - 15V AC/DC Current consumption Trasmitter: 40mA (max.); heater 400mA nominal (450mA max.) at 12V DC Receiver: 60mA (max.); heater 400mA nominal (450mA max.) at 12V DC Synchronous wiring No synchronous wiring required Operating temperature -25°C to +50°C Heating system Integral thermostat below + 15 deg. C User controls Single beam response switch Single/Dual Response control potentiometer 120mSec - 1500mSec Fog level control potentiometer light - heavy (other control factory sealed) System alarm response (interruption period) 1) 40mSec any 2 blocked 2) 120mSec to 1500mSec any 1 blocked 3) No alarm, nay 1 blocked Alarm output Form C (cnange-over) relay contacts 24V DC 1A Fog output Form C relay contacts 24V DC 1A Tamer switch N.C. opens when tower cover remoced 28V DC 0.1A Indication Singal strenth, alarm & fog LEDs