cam plate for sale, brand-new and used.

New York Supplies NY-Supplies Numbering Cam for Heidelberg MO Offset Printing Presses (Listing is for 1 cam, either left or right hand

Here is a decent original  cam lock style back plate. Measures a little over 12 1/2 inches across hole is a  1 3/4  the cam studs are 6 and 2/16 across edge to edge and 3 1/2 ed

With this package, you get the complete Series 90 cam plate motor assembly. We throw in the pin shaft (90-6031) and the compound gear (90-6035). The shaft pulls straight out to release the motor cover so it's good to have a few spares.

The EC-3000 and EC-3400 Series Rotary Cam Limit Switches replace traditional cams and mechanical limit switches, eliminating contact wear and bounce. They are shaft-driven and use interrupter discs and photocouplers

Item Description: Cambell SAC (Screw-Adjusted Cam) Plate Clamp Model# SAC-3 Recommended for turning plates from horizontal to vertical as well as through a 180° arc. The convex serrated cam swivels on a ball joint so that the area of cam engagement increases as load increases.Drop forged body and shackle. Note: SCREW NEEDS TO BE HAND TIGHT ONLY!

Campbell GX Plate Clamp 1/16"- 5/8" Grip 1/2 Ton WLL

Methods of Cam Milling, originally published by Kearney and Trecker Machine Tool Co., Milwaukee, Wisc., 1960s, Reproduced in 2010 by Nation Builder Books, Mebane, NC. 5 1/2 7 3/4 paperback, 36 pages. Please note that this book is new, not used.

TDP-5 Automatic Single Punch Tablet Press Small Particle Forming Machine function review(){ img=document.getElementById('imgsource'); wid=img.width; hei=img.height; if(wid400){