Original ARD High power Digital wireless remote control switch,1 way AC220V, US $28.00 – Picture 0

Original ARD High power Digital wireless remote control switch,1 way AC220V, US $28.00 – Picture 1

Original ARD High power Digital wireless remote control switch,1 way AC220V, US $28.00 – Picture 2

Original ARD High power Digital wireless remote control switch,1 way AC220V, US $28.00 – Picture 3

Original Ard High Power Digital Wireless Remote Control Switch,1 Way Ac220v

US $28.00

HK, Hong Kong
Mar 9th

Open on mobile:
QR code

Product specifications and descriptions & ARD Remote control switch Original ARD High power series remote control switch ARD-A311 Product Name 1xremote control,3x receiver Product Type ARD-A311 Operating Voltage AC220V 50/60Hz Operating Frequency 315MHz Receiver Size 130*60*30 mm Remote control size 95*38*16 mm Suitable temperature -25~65 Battery Type A23S 12V Alkaline Rated Power Resistive 3000W Inductive 1000W Output main component Relay Nominal 10A Scope of application: &Lighting homes, offices, factories, shopping malls, hotels, hospitals, warehouses and other places of control and similar electrical appliances - control (such as electric fans, televisions, computers, electrical appliances) can be remote on and off, can also manually ( by external wall switch) on and off, easy to operate and practical Packing list:Receiver X1, Remote control X1, Battery X1, Remote control holder X1 ,Manual X1. Product Description: (1) Receiver size: 130 * 60 * 30mm, both ends of the receiver has screw holes can be fixed in the wall or ceiling. (Case Material: metallic paint) (2) Remote control size: 95 * 38 * 16mm, remote control, silver-black, elegant and noble. (Case Material: fire retardant) (3) Remote control battery: 12V A23 Alkaline battery Remote control distance: more than 50 meters (open space), indoor less than 30 meters. Inductive load: 1000W or less (with ballast class, energy-saving lamps, brackets, ceiling lamps and other small appliances). Resistive Load: 3000W or less (incandescent lamps, water heaters, electric blankets, class). Applies (energy saving lamps, ceiling lamps, spotlights, downlights, background lights, crystal lamps, incandescent lamps, bracket lamps, fluorescent lamps, circular fluorescent tubes, LED light band), can also be used for electric fans, televisions, computers, table lamps such as the remote control of home appliances. Special load: 800W or less (eg: high-pressure sodium lamp, metal halide lamp, crystal lamp, lamp, flood light, G12 bulbs, double-ended halogen lamps, PRA38 bulbs, and high power loads Wiring instructions and precautions: 1, Receiver total of 5 lines, red line is a FireWire input, the white line is a Firewire output, two black lines are the zero line. Black and red lines of any one power to the zero line and the line of fire; there is a black line and white wire to the light input line or load input line ( the receiver must string between the lamp and power); the other end of the slender white line is the signal line (receiving antenna) can not be connected (if connected to the power supply can cause damage to the remote receiver) 2, The installation must first cut off the power After installation, be sure to check the output line of a short circuit (white line and black can not short circuit will damage the receiver) Welcome to our store! Feedback is very important to us.We will try to give you best service and will ship your orders promptly... If you have any problem, please send an ebay message to us, we will reply and solve anyproblem for you within 24 hours... Thank you for shopping with us... Note : This product will be sent to you with registered and tracking numbered courier!!