otc puller set for sale, brand-new and used.

Product Name 2 Jaw, 7 Ton Mechanical Grip-O-Matic Puller Features and Benefits: This long 2 jaw puller has a 7 ton capacity Features reversible jaws Maximum reach of 8-3/4", maximum spread: 9-1/2" Screw size: 11/16" - 18 x 9" Jaw thickness: 11/32"; Jaw width: 1" This complete line of gear and bearing pullers, enables you to remove and install parts for...

Product Name 2 Jaw, 2 Ton Mechanical Grip-0-Matic Puller Features and Benefits: This 2 jaw puller features a 2 ton pulling capacity Features reversible jaws Screw size 3/8" - 24 x 4-7/8" Maximum reach of 3-1/4" and with a maximum spread of 4" The jaw thickness: upper 3/16" lower 1/8"; and the jaw width: upper 1/4" and lower 1/2" These pullers are forged...

Product Name 2/3 Jaw, 5 Ton Mechanical Grip-0-Matic Puller Features and Benefits: This 2/3 jaw puller has a 5 ton capacity Features reversible jaws Maximum reach: 3-1/4"; Maximum spread: 7" Screw size: 9/16"-20 x 6-15/16" Jaw thickness: upper - 5/16", lower - 1/4"; jaw width: upper - 3/8", lower - 3/4" OTC has developed the most complete line of...

Product Name 17-1/2 Ton Capacity Push Puller Features and Benefits: It can be used with several different attachments depending on the job Has 9-1/2" legs Maximum reach 11-1/2" with a spread of 3-1/8"-11-3/4" Screw size 1"-14 x 13-1/4" Weight 20 lbs. This push-puller gives you what you want and the tonnage capacity you need to tackle parts removal and...

Product Name 30 Ton Push Puller Features and Benefits: Removes and installs press-fit parts Can be used with Nos. 1126 and 1127 bearing pulling attachments or No. 680 pulley pulling attachment (two 8012 adapters are required to connect 680 to puller) Can be used with No.

Product Name Large Gear and Pulley Puller Features and Benefits: The puller will spread from 2" to 7-3/4" Block is 8-1/4" wide, and its forcing screw is 3/4" - 16 x 11-5/8" long Accommodates any cap screws up to 1/2" diameter Using this tool, you can easily remove a wide range of gears, pulleys, or other parts that have tapped holes. Length: 13.2 "...

Product Name A/C Clutch Pulley Puller Set Features and Benefits: Two pair of jaws Spread: 3" to 5", Reach: 1" to 5" One 3/4"-16 x 5" live center forcing screw A clamp bolt 5-1/2" crossbar with 3 spread settings Weight: 4 lbs ; 11oz This is used for the removal of stubborn air conditioning clutch pulleys. Also can be used on many alternator, generator, power...

THIS IS A OWATTONA PULLER SET 5120-00-587-4151 Shipping on this item is 32.00 to the lower 48 states. If you are from overseas or Alaska or Hawaii please email me for a shipping quote. Please understand if it is going out of the country it can take between 3 and 6 weeks depending on customs.

ALL OR NOTHING DO NOT ASK TO BUY TOOLS SEPARATELY 68" epiq box very nice cond. has eletrical outlets on the top, Snap on side locker 24x28x 54" on rollers rough cond.All tools are Snap on Mac Matco cornwell some craftsman many new tools many used very little.Most tools are modern .Video upon request.

>>>>>CALL FIRST BEFORE BIDDING>>>>>ALL OR NOTHING DO NOT ASK TO BUY TOOLS SEPARATELY ******** PLEASE CALL FIRST******** I do not wrench for a living...68" Epiq box very nice cond.

Product Name Pilot Bearing Pulling Attachment Features and Benefits: Use to pull a pilot bearing from the end of the crankshaft interchangeable jaws One set of jaws covers a spread of 1/2" to 1-1/2"; other set of jaws covers a spread of 3/8" to 1-3/8" Reach has a min/max range of 3/16" to 1-1/4" Puller attaches to OTC and other slide hammers with...

Product Name 2-1/2 lb Slide Hammer Puller with Threaded End Features and Benefits: Length: 24" 2 1/2 lb. hammer 5/8"-18 threaded end Weight: 4 lbs. 12 oz.

Product Name Pilot Bearing Puller with 1-3/4" Reach Features and Benefits: Built especially for inside pulling jobs, and particularly for removing flywheel pilot bearings on automobiles, trucks and tractors Also very practical for pulling motor, generator, and magnet bearings Reach: 1-3/4"; ID spread minimum: 1/2"; maximum: 2" Length: 20.7 "...

Product Name 2 Ton GripLock 2 or 3 Jaw Puller Features and Benefits: Configuration conversions take just seconds; no wrenches required 2 or 3 Jaw application, with a 4" maximum reach, 3" to 4" spread Both external and internal pulling action "Live center" action forcing screw Professional finish for long lasting durability OTC Three-in-One "Griplock" Puller...

Product Name SLIDE HAMMER 5LB. PLLR Puller Slide Hammer 5 Lb Length: 34 " Width: 8.5 " Height: 3 " Item Weight: 12.5 lbs Seller Terms & Conditions 1. Shipping • Shipping charges: Standard shipping is FREE!