Other (Air Tools) for sale, page 216

Lot of 10 air power hammer pneumatic chisel bolt buster aircraft tool metal

Wichita, Kansas, United States
Jan 30th

FOR SALE IS A LOT OF 10 AIR POWER HAMMER PNEUMATIC CHISEL BOLT BUSTER AIRCRAFT TOOLS. THEY ARE IN GOOD CONDITION. CHECK OUT THE PICTURES.

Jsm 522 1_4 angle grinder

Ripley, New York, United States
Jan 30th

This is brand new only opened for pictures.

Set of 4 air power hammer pneumatic bolt buster aircraft tool metal sm-hsc

Wichita, Kansas, United States
Jan 30th

FOR SALE IS A SET OF 4 AIR POWER HAMMER PNEUMATIC CHISEL BOLT BUSTER AIRCRAFT TOOLS SM-HSC-10, 8, AND 6. ONE IS A NO-NAME. THEY ARE IN VERY GOOD CONDITION.

New planishing hammer die 528-d1 lower rectangle

Detroit, Michigan, United States
Jan 30th

New planishing hammer die lower rectangle 528-d25

Detroit, Michigan, United States
Jan 30th

Planishing Hammer Die 528-D25 Die Lower Rectangle Specs: Height: 5/8" Diameter: 1-1/4" X 1" New Flat, Sharp Edges Description: Form and shape light gauge sheet metal into replacement fenders and body parts using the same industrial grade tools the professionals use. Our planishing hammer parts and accessories are designed to retrofit to an original planishing hammer, or can be used to build a new unit.

2 inspection loupes for one price--eyes in your pocket!

Choteau, Montana, United States
Jan 30th

Two brand-new inspection lenses in secure protective cases that fit easily in a pocket or toolbox--magnified to 10x and 12x, for ready views of otherwise unseen damage or faults. Impress your supervisor while actually seeing what the specs call out! Shipping is flat-rate to the contiguous US--all others please use e-bay's shipping calculator or consult us for a quote; we combine shipping so multiple orders incur only one charge.

Machined nutplate bucking bar new!

Choteau, Montana, United States
Jan 30th

We are happy to offer a newly manufactured, old favorite to the aviation industry. This brand new bucking bar was designed and manufactured specifically for use with common aircraft nutplates right here in the USA. This bucking bar is about 3x1x5/8" and machined from quality steel, not cast, so imperfections and weak-points normally associated with cast bucking bars have been eliminated; three polished surfaces give ready access to those hard to reach

Sale! bell 206 collective controls rigging workaid p/n 19-228-free shipping!

Choteau, Montana, United States
Jan 30th

Now at a REDUCED PRICE! Another workaid that looks simple yet means so much to saving time and effort and helping assure proper control settings, this tool is made of A2 tool steel and powder coated in "forget-me-not" safety red. Reference is TM-1-1520-248-23, p.

O-ring & gasket removal & seating tool set--save fittings!

Choteau, Montana, United States
Jan 30th

Well, the whole set is FINALLY here! The complete, three-tool set includes one of each shown size:

Xuron model 2175 shears--clean & sharp!

Choteau, Montana, United States
Jan 30th

This pair of Xuron shears is an absolute for anyone who works with insulated or bare wiring, or even light sheet metal--Xuron model 2175 is the aircraft industry standard, and this one has been sharpened and cleaned up so it's almost a new tool! It may show some evidence of use or another owner's claim and testimony to its value, and the price is right for a reconditioned tool that behaves like its new. We combine shipping, so multiple orders from us incur but one charge.

Steel-bushing drill guide--accuracy in your hand! best seller!

Choteau, Montana, United States
Jan 30th

With your drill this handy tool becomes a portable drill press--hardened steel bushings pressed into aircraft-grade aluminum alloy put your drills where you intend them to be! Four drill sizes accommodate the four most popular aircraft fastener sizes: #10 for 3/16" fasteners; #20 for 5/32" fasteners; #30 for 1/8" fasteners; and #40 for 3/32" fasteners.

Countersink/counterbore kit--amazing value!

Choteau, Montana, United States
Jan 30th

$AVE on this countersink/bore kit!

Wiss 8" industrial shears--sharpened! -- price reduced!

Choteau, Montana, United States
Jan 30th

Now at a REDUCED PRICE! This sharpened and cleaned-up pair of industrial shears by Wiss (model A09, inlaid IDS) is one of the tools that, when needed, has no substitute--not even your Roy Rogers pocketknife or Luke Skywalker light saber can replace it! Wiss is the most trusted name in super-high quality tools, using aircraft-grade metal honed and polished to precise specifications.

Cleko pliers for absent-minded metal benders ***price reduced!

Choteau, Montana, United States
Jan 30th

Three used pair of cleko pliers for the absent-minded or executive sheet-metal expert! We subscribe to the PC inclusion code by including one pair each of: SATCO CLEKO-LOC WEDGELOCK or, if out of any, one or more! Shipping to the contiguous US is flat-rate USPS priority small box--others please use e-bay's calculator or consult us for a quote; we combine shipping, so multiple orders incur but one fee.

Bell 206 trunion spindel inner bearing race removal ( 19-227-1) price reduced!

Choteau, Montana, United States
Jan 30th

This may be an example of where only the right tool for the job will do--turned and finished within tolerances and made of harder tool-grade aluminum than called for (T351), this work aid may relieve those nagging thoughts that some important part of the aircraft was scratched, tweaked, or otherwise assaulted during maintenance. Reference is TM-55-1520-228-23-1, p. 5-39, Fig.

Bell 206 inner race removal plug (p/n 19-225-1)

Choteau, Montana, United States
Jan 30th

Manufactured per manual, this tool is made of tool steel turned within tight tolerances: 5.0 OAL and .480 diameter to remove inner races from trunnions. Reference is BHT-206B3-CR&O, p. 16, Figure 64-5 (206B3-R-64-5).

Travel chocks--flying essentials! flying weather is here! bargain price!

Choteau, Montana, United States
Jan 30th

Flying weather is (nearly) here! These handy brand-new travel chocks weigh almost nothing (maybe 12 ounces) yet are made of aircraft-grade aluminum with lightening holes so they are very strong for the weight, and measure about 8" OAL and 2" square. Powder-coated "Forget-Me-Not!" red, they are essential for those GA owners or others who dislike roaming aircraft.

Drill extension set for threaded drills--new!

Choteau, Montana, United States
Jan 30th

Another popular CAPSON homegrown tool! Precision drill extensions for drills threaded 1/4 x 28, we make them as smooth and polished as we can for finger-friendly and cooler use. OAL is 2", 4", and 6", with 1/4" shanks and 3/8" raw diameter.

Cube #10 drill guide + gauges--going fast!

Choteau, Montana, United States
Jan 30th

Finally, a handy pocket-size drill guide that is substantial enough to hold securely in your fingers without that dreaded minefield suspense that other narrow and slim ones offer! About one-inch cubed and with a hardened steel #10 steel bushing insert, this high-grade aluminum tool has a four-footed chip relief on the bottom and a plumb surface between the feet for those narrow rail jobs.

Safety wire & cotter pin guide--with free drills!

Choteau, Montana, United States
Jan 30th

Brand new finger saver--solid tool steel with threaded ports and 90-degree guides for appropriately sized through holes for both safety wire and cotter pins and other end holds. Used in a vise or carefully held in the hand, this is a tool for which there is no substitute that won't promise drilled fingers, gouged stressed aluminum, broken drills, dimpled fasteners, fuming supervisors and salivating FAA demigods.