Other (Stationary Engines) for sale, page 39

Genuine petter ac1 early type cylinder head assembly 391599 acb39

Luton, Bedfordshire, United Kingdom
Jan 31st

This auction is for a Genuine Petter AC1 early type cylinder head, early type heads are identifiable by the injector type used. The early ones had injectors where the nozzle protudes around half an inch from the injector body, on later AC1 heads the nozzle lies flush with the body. The 2 types are not interchangable.

Lister petter standard centre main bearing 393015 for ac2 ad2

Luton, Bedfordshire, United Kingdom
Jan 31st

This auction is for a Genuine Lister Petter Standard Size Centre Main Bearing (Later Copper Lead Type) Lister Petter part number 393015 & ACC42. Suitable for some AC2 AC2W AC2WM Mini Twin & AD2 If you are unsure whether this bearing fits your engine please call us, we have o

Lister petter centre main bearing for lr sr sw 0.010" undersize 570-11171/010

Luton, Bedfordshire, United Kingdom
Jan 31st

This journal set of 0.010" undersize centre main bearings is a new and genuine Lister Petter part available for LR2 SR2 SR3 SW2 SW3 engines. The Lister Petter Centre Main Bearing has a part number of 570-11171/010 and is also available in standard sizes including 0.020" and 0.040" undersize. MEAD Plant is a Lister Petter main dealer situated in Luton with a stock holding of over ?1m for all Lister and Petter types.

Lister petter piston ring set +0.50mm oversize for early tl2 tl3 570-31240/050

Luton, Bedfordshire, United Kingdom
Jan 31st

This auction is for a Genuine Lister Petter Piston Ring Set +0.50mm to fit early (1983 to 1985) TL2 & TL3 engines. This is a 4 ring pack, the later pistons used a 3 ring piston. Lister Petter part number 570-31240/050 If you are unsure whether this ring se

Genuine petter ac2 cylinder head assembly, gear end 393192 acb39a

Luton, Bedfordshire, United Kingdom
Jan 31st

This auction is for a Genuine Petter AC2 cylinder head. This head is for the gear end on the AC2. Lister Petter part number 393192 & ACB39a If you are unsure whether this head fits your engine please call us, we have over 40 years experience on Lister & Petter engines.

Genuine petter ac1 series 2 silencer heat shield protection 275177

Luton, Bedfordshire, United Kingdom
Jan 31st

This auction is for a Genuine Petter AC1 Series 2 Silencer Guard, for use with the high efficiency silencer 407060. An image of the silencer to which it fits is include in the secondary photos. Lister Petter part number 275177 If you are unsure whether this fits your engine please call

Lister petter piston ring set +1.00mm for later lpa2 lpa3 engines 750-11272/100

Luton, Bedfordshire, United Kingdom
Jan 31st

This auction is for a Genuine Lister Petter Piston Ring Set +1.00mm to fit Later LPA2 & LPA3 Engines (from 1991 onwards) Lister Petter part number 750-11272/100 If you are unsure whether this ring set fits your engine please call us, we have over 40 years experience on L

Lister petter piston assembly +0.25mm later lpws & marine engines 750-40093/025

Luton, Bedfordshire, United Kingdom
Jan 31st

This auction is for a Genuine Lister Petter Piston Assembly (includes rings, pin & circlips) at +0.25mm to fit Later LPWS2, LPWS3, LPWS4 Engines (from 1992 onwards) These engines are also the basis for many Lister Petter marine models and will also therefore fit indirect injection models Canal Star 18, Canal Star 27, Canal Star 36, Alpha 20,

Lister petter piston assembly +0.50mm later lpws & marine engines 750-40093/050

Luton, Bedfordshire, United Kingdom
Jan 31st

This auction is for a Genuine Lister Petter Piston Assembly (includes rings, pin & circlips) at +0.50mm to fit Later LPWS2, LPWS3, LPWS4 Engines (from 1992 onwards) These engines are also the basis for many Lister Petter marine models and will also therefore fit indirect injection models Canal Star 18, Canal Star 27, Canal Star 36, Alpha 20,

Antique curtis air compressor

Kenmare, North Dakota, United States
Jan 31st

For sale, an old, cast iron Curtis air compressor. I contacted the folks at Curtis, but the only info that they were able to give me was that the compressor was built between 1919 and 1929. I disassembled, blasted and painted the compressor.

Vintage 1940s briggs & stratton model wi wm wmb gas engine small cast iron motor

Clarks Grove, Minnesota, United States
Jan 31st

This is a Very Cool, Model WI, WM or maybe WMB, Briggs and Stratton, Horizontal Shaft, Cast Iron Block, Small Gasline Engine. Turns over smooth. Sold as is, Untested.

Antique cast iron & brass water pat 1895 sprayer pump fe myer & bros

Milford, Ohio, United States
Jan 31st

var itemNumber = window.ebayItemID ?

Lister petter piston ring set +0.50mm for later lpa2 lpa3 engines 750-11272/050

Luton, Bedfordshire, United Kingdom
Jan 31st

This auction is for a Genuine Lister Petter Piston Ring Set +0.50mm to fit Later LPA2 & LPA3 Engines (from 1991 onwards) Lister Petter part number 750-11272/050 If you are unsure whether this ring set fits your engine please call us, we have over 40 years experience on L

Lister petter piston ring set +0.25mm for early lpa2 lpa3 engines 750-11271/025

Luton, Bedfordshire, United Kingdom
Jan 31st

This auction is for a Genuine Lister Petter Piston Ring Set +0.25mm Oversize to fit early LPA2 & LPA3 Engines (pre 1991) Lister Petter part number 750-11271/025 If you are unsure whether this ring set fits your engine please call us, we have over 40 years experience

Lister petter piston ring set +0.50mm for early lpa2 lpa3 engines 750-11271/050

Luton, Bedfordshire, United Kingdom
Jan 31st

This auction is for a Genuine Lister Petter Piston Ring Set +0.50mm Oversize to fit early LPA2 & LPA3 Engines (pre 1991) Lister Petter part number 750-11271/050 If you are unsure whether this ring set fits your engine please call us, we have over 40 years experience

Genuine petter aa1 ab1 ac1 short extension shaft 360028

Luton, Bedfordshire, United Kingdom
Jan 31st

This auction is for a Genuine Petter Gear End Extension Shaft, 38mm (1.5") Long x 25mm (1") Diameter. Hole centres are 45mm. Lister Petter part number 360028 If you are unsure whether this fits your engine please call us, we have over 40 years experience on Lister & Petter engines

Genuine lister petter inlet & exhaust valve ts1 ts2 ts3 201-30040 201-30051

Luton, Bedfordshire, United Kingdom
Jan 31st

This auction is for a pair of Lister Petter TS inlet & exhaust valves. These are new old stock, not in original boxes. They do have the Lister Petter part numbers on the valve stem.

Lister petter engine fuel lift pump 2 bolt type fits many models

Kendal, United Kingdom
Jan 31st

include("jq

Coffee cup with images of fairbanks morse and international harvester truck

Mebane, North Carolina, United States
Jan 31st

COFFEE CUP with images of International Harvester truck, circa 1920s, and Fairbanks Morse 3 h.p "Z" engine. A friend of mine had 36 of these made, so these are very unique cups! There are not millions or even thousands floating around out there.

Lister petter 3x90 4x90 / deutz d2008 d2009 radiator

Luton, Bedfordshire, United Kingdom
Jan 31st

This listing is for a new, old stock raditator to fit the Lister Petter X90 Range. The X90 engine was designed and built by Lister Petter in the early 2000's and subsequently taken on by Deutz and renamed the D2008 and D2009 by them. This radiator should fit all naturally aspirated engines and some turbo charged ones.