Other Cutting Equipment & Expendables (Cutting Equipment & Expendables) for sale, page 28

Sc-51-d cylindrical radius end double cut carbide bur rotary file burr dremel

Ontario, Canada
Jun 17th

Brand New Industrial Quality Solid Carbide Bur Can be use on a variety of metals and other materials Effective up to a hardness of HR70C on the Rockwell scale Top Quality Carbide Steel 10x the durability of High Speed Steel 200x the durability of mounted stones Precision Machined and Balanced

Sd-51-d ball shape double cut carbide bur rotary file burr dremel tool

Ontario, Canada
Jun 17th

Brand New Industrial Quality Solid Carbide Bur Can be use on a variety of metals and other materials Effective up to a hardness of HR70C on the Rockwell scale Top Quality Carbide Steel 10x the durability of High Speed Steel 200x the durability of mounted stones Precision Machined and Balanced

Se-51-d oval shape double cut carbide bur rotary file burr dremel tool egg

Ontario, Canada
Jun 17th

This Solid Carbide SE-51-D Oval Shape Double Cut Rotary File Burr Dremel Tool Egg is a top-quality choice for industrial use on various materials. The total length is 1.8" - 46mm. Precision machined and balanced, it comes with a plastic storage case to keep it organized.

Manchester tool upper insert clamp # cm 435-144

Johnson City, New York, United States
Jun 17th

Weldon solid hs pilot counterbore lgn10 2 flute

Stanhope, New Jersey, United States
Jun 17th

WELDON SOLID HS PILOT COUNTERBORE LGN10 HS74, 2 SOLD ASIS FLUTE .187 PILOT ,.330 CUTTER DIA , 2-3/4" LONG . FOR A #10 SCREW. PREOWNED USED MABEY 1 TIME ,STILL VERY SHARP .SOLD ASIS

Nos hss plain tooth side & face horizontal milling cutter 6"x5/8"x1-1/4"

Perth, Ontario, Canada
Jun 17th

This sale is for ONE NOS High Speed Steel 6" Diameter x 5/8" Tooth x 1-1/4" Bore, SIDE & FACE Horizontal MILLING CUTTER. The 1-1/4 inch bore has an internal parallel keyway. This cutter is protected in a light rubber/wax coating The cutter may have stains from original packaging grease, refer to photographs.

Mitsubishi hob arbor for g series showa nt45-cncjh23022 diameter 1.5"

Statesville, North Carolina, United States
Jun 17th

Description Manufacturer:SHOWA Model: For Mitsubishi G Series machines Type or ID: NT45-CNCJH23022 Diameter: 1.5" or 38.1mm

Nos qualcut hss stagg tooth side & face horizontal milling cutter 4"x5/16"x1" b

Perth, Ontario, Canada
Jun 17th

This sale is for ONE NOS Qualcut made High Speed Steel 4" Diameter x 5/16" Tooth x 1" Bore, Staggered Tooth Side & Face Milling Cutter. There is a 1 inch internal parallel keyway. The cutter may have some staining from old packing grease, please see photos.

Nos hss plain tooth side & face horizontal milling cutter 6"x9/16"x1" b

Perth, Ontario, Canada
Jun 17th

This sale is for ONE NOS High Speed Steel 6" Diameter x 9/16" Tooth x 1" Bore, SIDE & FACE Horizontal MILLING CUTTER. The 1 inch bore has an internal parallel keyway. This cutter is protected in a light rubber/wax coating The cutter may have stains from original packaging grease, refer to photographs.

Nos hss plain tooth side & face horizontal milling cutter 3"x5/16"x1"

Perth, Ontario, Canada
Jun 17th

This sale is for ONE NOS High Speed Steel 3" Diameter x 5/16 Tooth x 1" Bore, SIDE & FACE Horizontal MILLING CUTTER. The 1 inch bore has an internal parallel keyway. The cutter may have stains from original packaging grease, refer to photographs.

Weldon 97412-00-w high speed steel straight shank tu-lip counterbores

Duncan, South Carolina, United States
Jun 17th

Greatly reduces tool room grinding costs Features Weldon Tu-Lip counterbores are extremely free cutting with only two lips to regrind. Generous chip room in the flutes minimizes breakage caused by clogging. Solid pilots without grooves will not ream or mar holes.

Whitney tool 30018 808 1' c/t wood ruff keyseat cutter

Duncan, South Carolina, United States
Jun 17th

Applications For machining steel heat treated up to Rc 62. Features Finish is comparable to ground surfaces. Shanks flattened for set screws.

Nos hss plain tooth side & face horizontal milling cutter 5" x 7/16" x 1"

Perth, Ontario, Canada
Jun 17th

This sale is for ONE NOS High Speed Steel 5" Diameter x 7/16" Tooth x 1" Bore, SIDE & FACE Horizontal MILLING CUTTER. The 1 inch bore has an internal parallel keyway. The cutter is protected in a light rubber/wax coating and may have stains from original packaging grease, refer to photographs.

Nos hss plain tooth side & face horizontal milling cutter 5"x3/8"x1-1/4"

Perth, Ontario, Canada
Jun 17th

This sale is for ONE NOS High Speed Steel 5" Diameter x 3/8" Tooth x 1-1/4" Bore, SIDE & FACE Horizontal MILLING CUTTER. The 1-1/4 inch bore has an internal parallel keyway. The cutter may have stains from original packaging grease, refer to photographs.

Gear shaper cutter m1.5 z-50 pa 20° Сlass a t1 hss ussr module 1.5

Dnepropetrovsk, UA, Ukraine
Jun 17th

Mitsubishi hob arbor for g series showa nt50-cnc22.225-389hb diameter 7/8"

Statesville, North Carolina, United States
Jun 17th

Description Manufacturer:SHOWA Model: For Mitsubishi G Series machines Type or ID: NT50-CNC22.225-389HB Diameter: 7/8" or 22.225mm

Nos qualcut hss stagg tooth side & face horizontal milling cutter 4" x3/8"x1" b

Perth, Ontario, Canada
Jun 17th

This sale is for ONE NOS Qualcut made High Speed Steel 4" Diameter x 3/8" Tooth x 1" Bore, Staggered Tooth Side & Face Milling Cutter. There is a 1 inch internal parallel keyway. The cutter may have some staining from old packing grease, please see photos.

Nos hss stagg tooth side & face horizontal milling cutter 5"x 5/16 " x 1"

Perth, Ontario, Canada
Jun 17th

This sale is for ONE NOS High Speed Steel 5" Diameter x 5/16" Tooth x 1" Bore, STAGGERED TOOTH SIDE & FACE Horizontal MILLING CUTTER. The 1 inch bore has an internal parallel keyway. The cutter may have stains from original packaging grease, refer to photographs.

5/16" & 1/2" solid carbide end mills 2 per bid, nos champion 107-1/2 & 166-5/16

Philadelphia, Pennsylvania, United States
Jun 17th

OFFERED: 2 SOLID CARBIDE END MILLS PER BID 1. Champion 107-1/2" Double End Solid Carbide End Mill Shank Size 1/2" Material Carbide Length

#14 bell combined drill & countersink hs, black oxide, trw usa-new-sold by each

Brunswick, Georgia, United States
Jun 17th

This is for a #14 Bell Combined Drill & Countersink HS, Black Oxide Finish - MADE IN USA by TRW These countersinks are NEW and sold by the piece. Dimensions: Body Diameter = 5/16", Drill Diameter = 7/64", Bell Diameter = .250, Overall Length = 2-1/8" This countersink is recommended for parts passing through several operations where there is a danger of marring the edges of the center hole, thus destroying the accuracy of the center. The