Other Electronic Monitoring Devices & Assemblies (Electronic Monitoring Devices & Assemblies) for sale, page 164

Garmin gps16-lvs new 3.3v-6v with 8-pin rj-45 modular connector

Mountain View, California, United States
Jan 29th

These are unused Garmin GPS 16 LVS (Low Voltage) units that were going to be used for a project, but remained in stock. They are taken from original carton for the addition of a waterproof grommet on the cable, in anticipation of the project, so they are no longer in their original carton but are still carefully wrapped in plastic and bubble wrap, I took one unit out of the bag to make pictures.

New logic level converter steady 3.3v to 5v ttl level converter

Shenzhen, China
Jan 29th

var itemNumber = window.ebayItemID ?

New 2.4g nrf24l01+pa+lna wireless module with ceramic antenna 2.54mm

Shenzhen, China
Jan 29th

var itemNumber = window.ebayItemID ? window.ebayItemID : -1; function passpara(){return '&id=1906446&itembgcolor=0xFFFFFF&bordercolor=0x000006&storewindowbgcolor=0xf1f1f1&toptextcolor=0xFFFFFF&bottomtextcolor=0xFFFFFF&stripcolor=0x006ab1&auctionclosemessagecolor=0x006ab1&emptyboxmessagecolor=0x006ab1&buttovercolor=0x006ab1&buttoutcolor=0x006ab1&searchtitlecolor=0xFFFFFF&searchbuttbgcolor=0xFFFFFF&searchbutttextcolor=0x000000&searchbuttbordercolor=0x000000&itemhighlightc

Uart to wifi wireless module ethernet to wifi hlk-rm04 wireless development kit

Shenzhen, China
Jan 29th

var itemNumber = window.ebayItemID ?

1pc nrf24l01 2.4ghz wireless transceiver module operating voltage 1.9-3.6v hi-q

Shenzhen, China
Jan 29th

About us Shipping Payment

Cc1100 433mhz wireless rf transceiver module operating voltage 1.8~ 3.6v hi-q

Shenzhen, China
Jan 29th

About us Shipping Payment

Max232cpe transfer chip rs232 to ttl converter module com serial board usb cable

Brooklyn, New York, United States
Jan 29th

The item was not used. Comes with USB cable and jump cables.

6pin usb2.0 to ttl converter ch340g for stc arduino pro instead of cp2102 pl2303

Hong Kong, Hong Kong
Jan 29th

The mini module is designed specifically for STC download and ARDUINO PRO, with cold start reset buttons. It supports all series of STC microcomputers, making it easy to connect to your MCU. Additionally, the TTL interface output makes it possible to use 3.3V and 5V target devices, with dual 3.3V and 5V Power output.

Mini usb nano v3.0 atmega328 5v micro-controller board arduino-compatible kn

United States
Jan 29th

Nano v3.0 atmega328p module board + mini usb cable for arduino compatible kn

United States
Jan 29th

Nrf24l01+pa+lna sma antenna wireless transceiver communication module 2.4g kn

United States
Jan 29th

Version atmega328p uno r3 ch340t instead 16u2 & free usb cable for arduino kn

United States
Jan 29th

Interface base board serial transceiver bluetooth module for arduino uno r3 kn

United States
Jan 29th

2015 atmega2560 16au microcontroller board + usb cable

Shenzhen, China
Jan 29th

For the arduino nano v3.0 avr atmega328p-au module terminal adapter board nano

Hong Kong, Hong Kong
Jan 29th

FOR the Arduino Nano V3.0 AVR ATMEGA328P-AU Module Terminal Adapter Board Nano

Hot pcb adapter + touch panel+ for arduino 3" 3.0 inch tft lcd module display

Hong Kong, Hong Kong
Jan 29th

Power supply for the TFT screen is 2.8-3.3V and 3.3V for the backlight. When using an input voltage VIN of 5V, make sure to step down to 3.3V using a voltage regulator IC since the TFT requires 3.3V voltage to operate. Note that the 3.0" TFT PCB may be printed 3.2" but it is designed to work the same by the manufacturer.