Other Manufacturing Equipment & Tools

The average price for current category was $4,647.19 last month.

There are 5146 ads in this category.

Pullmax p-13 loaded with tooling 110v 1ph

Pullmax p-13 loaded with tooling 110v 1ph

  • Philadelphia, Pennsylvania, United States
  • Aug 15th
Pullmax P-13 This unit comes well tooled and ready to go for general panel making and coach building. Machine is in overall excellent condition and in good working order. It runs on 110v single phase power but could be switched to 220v.
New Holland Centrfugal Spin Dryer 3 (K-24) And 1 (K-90)

New holland centrfugal spin dryer 3 (k-24) and 1 (k-90)

  • Torrance, California, United States
  • Aug 15th
1 K-24 working 1 K-24 non working 1 K-24 non working 1 K-90 non working
ORIEL 3" OUTER 1.7" INNER DIAMETER INCH OPTIC MOUNT LENS HOLDER ~ NEWPORT

Oriel 3" outer 1.7" inner diameter inch optic mount lens holder ~ newport

  • Las Vegas, Nevada, United States
  • Aug 15th
ORIEL 3" OUTER 1.7" INNER DIAMETER INCH OPTIC MOUNT LENS HOLDER ~ NEWPORT
OPTO SIGMA OPTICAL RAIL CARRIER 90MM X 25MM x 27MM ~ 90 MM x 25 MM X 27 MM

Opto sigma optical rail carrier 90mm x 25mm x 27mm ~ 90 mm x 25 mm x 27 mm

  • Las Vegas, Nevada, United States
  • Aug 15th
OPTO SIGMA OPTICAL RAIL CARRIER 90MM X 25MM x 27MM ~ 90 MM x 25 MM X 27 MM
THORLABS C1519 POST WITHOUT C1520 PLATFORM MOUNT

Thorlabs c1519 post without c1520 platform mount

  • Las Vegas, Nevada, United States
  • Aug 15th
THORLABS C1519 POST WITHOUT C1520 PLATFORM MOUNT
REYNOLDS TECH PROCESS TANK FLOAT FLS 209068 FLS209068

Reynolds tech process tank float fls 209068 fls209068

  • Las Vegas, Nevada, United States
  • Aug 15th
PROCESS TANK FLOAT FLS 209068
DENRAY 2630G DOWN DRAFT TABLE

Denray 2630g down draft table

  • Irving, Texas, United States
  • Aug 15th
DENRAY 2630G DOWN DRAFT TABLE
centrifugal dryer

Centrifugal dryer

  • Riverview, Florida, United States
  • Aug 15th
centrifugal dryer. New you can choose the plug-in. 70kg capacity Ask about shipping because price is not right and the weight is about 400 pounds
Everett wet abrasive saw 14-16

Everett wet abrasive saw 14-16

  • Chatsworth, California, United States
  • Aug 15th
Everett wet abrasive saw 14-16. Saw has always performed perfect,it comes with water tank and all electrical. We’re are downsizing and no longer require the saw.
Rampe Labor Saver Vibratory Finishing Machines

Rampe labor saver vibratory finishing machines

  • Watertown, Connecticut, United States
  • Aug 15th
We will ship anywhere in the United States, if you are out of the United States we will ship to any Port that you choose with in the USA. We will answer any questions and assist in any way possible to facilitate your purchase, call with any questions. Please call with any questions.
Cantilevered boom crane, 8' length,  500# capacity

Cantilevered boom crane, 8' length, 500# capacity

  • Santa Ana, California, United States
  • Aug 15th
Cantilevered beam crane with 8' beam. Abell-Howe, model H-F007, made in USA. Intended for wall mounting to concrete wall allowing 180 degree swing.
NEW BALLUFF PROXIMITY SENSOR ( BES 516-325-E4-Y )

New balluff proximity sensor ( bes 516-325-e4-y )

  • Bogart, Georgia, United States
  • Aug 14th
MANUFACTURER: BALLUF PART#: BES 516-325-E4-Y DESCRIPTION: PROXIMITY SENSOR SWITCH PA LOCATION: QTY 2 SHELF ?
Fec D A sun like LED Ultra Thin Series LED Grow Light

Fec d a sun like led ultra thin series led grow light

  • Charlestown, Indiana, United States
  • Aug 14th
Fec D A sun like LED Ultra Thin Series LED Grow Light
New Lubriplate 10 OZ Garage Door Opener Low Temp Lithium Grease Lot Of 4

New lubriplate 10 oz garage door opener low temp lithium grease lot of 4

  • Tolleson, Arizona, United States
  • Aug 14th
New Lubriplate 10 OZ Garage Door Opener Low Temp Lithium Grease. Lot of 4
Trico Spray Master Spray Cooling System, Needle Valve, Number of Lines: 1

Trico spray master spray cooling system, needle valve, number of lines: 1

  • Flourtown, Pennsylvania, United States
  • Aug 14th
Trico Spray Master Spray Cooling System, Needle Valve, Number of Lines: 1. Includes mounting bracket and hoses with 90 degree nozzle. This unit was removed from a radial arm saw.
Vtg Atq Worcester MA Machine Tool Guage Measure Instrument Thickness Width USA

Vtg atq worcester ma machine tool guage measure instrument thickness width usa

  • South Hadley, Massachusetts, United States
  • Aug 14th
Will pack with care and ship fast.

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies