+ Post new Ad

Other Woodworking Equipment & Machines

The average price for current category was $8,671.30 last month.

There are 4435 ads in this category.

Walker Turner Belt Driven Grinder

Walker turner belt driven grinder

  • Loveland, Colorado, United States
  • Aug 3rd
Good condition early model belt driven grinder.
Walker Turner Model 124 Tool Rests + Banjo

Walker turner model 124 tool rests + banjo

  • Loveland, Colorado, United States
  • Aug 3rd
Nice condition tool rests and banjo for your lathe. Unfortunately the handle for the banjo is missing.
INTERLAKE S3A-3/4 STITCHER, BLUE, SERIAL NO 3930, YEAR 1980

Interlake s3a-3/4 stitcher, blue, serial no 3930, year 1980

  • Coffeyville, Kansas, United States
  • Aug 3rd
INTERLAKE S3A 3/4" STITCHERSERIAL NO. 3930MODEL NO. S3AW/DAYTON MOTORMODEL NO.
SCMI Olimpic k201 Edgebander

Scmi olimpic k201 edgebander

  • Greensburg, Pennsylvania, United States
  • Aug 3rd
SCMI Olimpic k201 Edgebander 2002 Model. Single-sided automatic edge banding machine. Can be used in applying edging to wood, melamine, PVC, veneer or coiled material.
160mm Wheel Marking Gauge Woodworking Scribers Parallel Line Drawing Tool

160mm wheel marking gauge woodworking scribers parallel line drawing tool

  • ShenZhen, China
  • Aug 3rd
Dust Deputy Cyclone Debris Cleaning Air Dirt Filter Molded Collector Kit, NEW

Dust deputy cyclone debris cleaning air dirt filter molded collector kit, new

  • Mason, Michigan, United States
  • Aug 3rd
INCREASED SUCTION POWER - The ORIGINAL shop vacuum cyclone, now 20% more throughput (CFM) and efficiency with Neutral Vane Technology, Oneida Air Systems' patented Dust Deputy cyclone uses centrifugal force to capture and remove 99% of dust and debris from the air-stream before it reaches your vacuum filter, eliminating clogged filters and suction loss!
Fulton Precision Miter Gauge with a Standard Slot 3/4” x 3/8” Steel Bar with ...

Fulton precision miter gauge with a standard slot 3/4” x 3/8” steel bar with ...

  • Phoenix, AZ, United States
  • Aug 3rd
Fulton Precision Miter Gauge with a Standard Slot (3/4” x 3/8”) Steel Bar with Adjustable Spring Loaded Plungers and Removable Retaining Disc If you own a table saw and you need to make a crosscut at any angle then you know how valuable a miter gauge can be. You may also know that the miter gauge that came with your saw is not terribly accurate or durable. Not to mention that the fit in the miter slot may not be all that great as well.
Big Horn 19838 ProGrip Bandsaw Fence

Big horn 19838 progrip bandsaw fence

  • Phoenix, AZ, United States
  • Aug 3rd
Big Horn 19838 ProGrip Bandsaw Fence From the Manufacturer Conveniently sized Big Horn ProGrip Band saw Fence can be used on a band saw, router table, or other similar sized power tool, and measures 3-1/2-Inch by 18-Inch. It is made from lightweight extruded aluminum and is designed with T-Slots along the top edges, making this fence ideal for use with hold down feather boards and stop blocks.
Delta 20" Rockwell 1.5HP Bench Top Industrial power feed drill press 70-6X0

Delta 20" rockwell 1.5hp bench top industrial power feed drill press 70-6x0

  • Canoga Park, California, United States
  • Aug 3rd
17" Rockwell Industrial power feed drill press. , Model 70-6X0 S/N 1635914 GENERAL SPECIFICATIONS Table Type Hand Feed Throat Depth, Drills To Center Of......20" Spindle Speeds, Belt Change............ Rockwell Drill Press, 20" Swing, 1.5 HP Motor, 230/460, 3ph, Amps 4.6/2.3, 1735 RPM Comes with Jacobs Chuck Need more Info??
Kreg Quik-Kit Pocket Hole Jig Kit Quick Change & Chuck Tool

Kreg quik-kit pocket hole jig kit quick change & chuck tool

  • Jamestown, Tennessee, United States
  • Aug 3rd
FREE SHIPPING 48 STATES Kreg Quik-Kit Pocket Hole Jig Kit Quick Change & Chuck Tool Part Number: 0930982
Delta Sliding Shaper Jig

Delta sliding shaper jig

  • Howard, Ohio, United States
  • Aug 2nd
Delta 43-188 Sliding Shaper Jig. Safely run material to make the cope cut on cabinet door rails, and other small pieces that would be too dangerous to feed with your hands.
Delta Industrial Versa Feeder Model 36-865

Delta industrial versa feeder model 36-865

  • Howard, Ohio, United States
  • Aug 2nd
Delta Industrial Versa Feeder Model 36-865. DELTA 36-865 Versa-Feeder 1/8 Horsepower 10 to 46 Feet Per Minute Variable Speed Stock Feeder, 115-Volt 1 Phase. Needs feed wheel replaced.
Unmarked Vintage Step Pulley - 4 Groove - All Metal 5" Diameter MAX

Unmarked vintage step pulley - 4 groove - all metal 5" diameter max

  • Hiram, Georgia, United States
  • Aug 2nd
However, if you have any questions, we will do our best to provide assistance. The bottom of this unmarked vintage step pulley measures 5" in diameter, while the top measures 2". Please refer to the photos to observe the cosmetic wear of this vintage pulley.
Unbranded Vintage Step Pulley - 4 Groove - All Metal 4" Diameter MAX Worn

Unbranded vintage step pulley - 4 groove - all metal 4" diameter max worn

  • Hiram, Georgia, United States
  • Aug 2nd
Please note. We are not tool or part sellers and really no nothing about these items. Feel free to ask any questions and we'll be happy to try to help.
Grizzly Industrial G0826 - Easy Feeder Power Feeder

Grizzly industrial g0826 - easy feeder power feeder

  • Denver, Colorado, United States
  • Aug 2nd
Motor: BLDC 1/2 HP, 220V, single-phase, 1.8A Number of speeds: Variable Feed speeds: 7–72 FPM Number of rollers: 3 Roller size: 2-5/16" wide x 4-3/4" dia. This all-purpose, heavy-duty power feeder is ideal for use with table saws and shapers. It features a 1/2 HP BLDC motor that provides energy-efficient, high-torque, variable-speed feed control from a single-phase power supply.
W1053 Dust Collecting Grounding Kit (50'

W1053 dust collecting grounding kit (50'

  • Antioch, Tennessee, United States
  • Aug 2nd
Woodstock W1053- DUST COLLECTION GROUNDING KIT ( 50' ) BOX DOES A FEW DENTS IN THE PLASTIC BUT DOES NOT AFFECT THE KIT IN ANY WAY D.C. grounding kit provides everything you need to ground a dust collection system Ground your system against electrical charge buildup Comes with directions for installation Includes copper wire, eight wire nuts, two grounding screws, and two wire connectors 50 feet of wire
16” Jointer

16” jointer

  • Brandywine, Maryland, United States
  • Aug 2nd
16” wide, three knife jointer. Heavy duty with three leg design. Settings for spring board or straight jointing.
Hammond Industrial Dust Collector

Hammond industrial dust collector

  • Boca Raton, Florida, United States
  • Aug 2nd
Hammond Dust Collectors are commonly considered some of the very best units on the market. They are extremely well made, provide cyclone efficiencies, and are extremely quiet in their operation. This unt is equipped with an integrated muffler.
Powermatic PF-33 4-Speed Feeder, 1HP, 3PH 230V (1790800K)

Powermatic pf-33 4-speed feeder, 1hp, 3ph 230v (1790800k)

  • Denver, Colorado, United States
  • Aug 2nd
CONTINUOUS-DUTY MOTOR: Transfers power from the gear box to the feed roller. QUICK CHANGES: Rollers can be changed out easily and quickly. DURABLE DESIGN: Solid cast iron construction of body pieces and base.
Powermatic - Pf-33 Feeder, 1Hp 3Ph 460V, 4 Speed(1790810K, Pf-33)

Powermatic - pf-33 feeder, 1hp 3ph 460v, 4 speed(1790810k, pf-33)

  • Denver, Colorado, United States
  • Aug 2nd
Roller chain and sprockets provide positive feeding for a variety of work Support column is fully adjustable for horizontal, vertical or angled FEEDER position Feeder body, column base and joints are cast iron for heavy duty operation Rollers can be changed out easily and quickly Quality machinery From the manufacturer

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies