Other Woodworking Equipment & Machines (Woodworking Equipment & Machines) for sale, page 196

Big Bear Lake, California, United States
Jan 30th

this is a delta 50-765 in great condition it has a 5hp single phase motor 220v it needs new plastic bags but they only cost about $3 each online.this is a very powerful machine that is geared more to the professional cabinet shops but if you got the space at your home shop this will handle all your machines you can also get all the specific details about the 50-765 on deltas website i have some hoses blast gates and connectors to get you started

Magnetic led task light for mill, lathe, bandsaw and other close up work. new

Atlanta, Georgia, United States
Jan 30th

NEW BIGGER BASE MAGNET to hold securely to any ferrous surface! Woodworker designed LED light, great for a task on any tool that you need good quality light up close. I use two of them for my lathe as you can see from the pix, and one on my bandsaw and drill press.

Dustkop 3400 cfm cyclone dust collector w/baghouse/shaker indoor/outdoor

Naperville, Illinois, United States
Jan 30th

HELPING YOU BUY WITH CONFIDENCE 100% POSITIVE FEEDBACK SINCE 1999 ________________________________________________________________________________________________________________________________________

Rosenquist dual easel continuous high production radio frequency gluer

Naperville, Illinois, United States
Jan 30th

HELPING YOU BUY WITH CONFIDENCE 100% POSITIVE FEEDBACK SINCE 1999 ________________________________________________________________________________________________________________________________________

Rockwell delta model 9 contractor's saw main table 22" x 15" cast steel

Youngstown, Ohio, United States
Jan 30th

Part # 422-02-091-2001 Good condition (NC)

Delta 3hp two stage dust collector

Kent, Ohio, United States
Jan 30th

Delta two stage 3hp three phase dust collector.works great with no issues. comes with collector,dust bag ,two 55 gal drums and starter switch. no additional duct work.

H behlen rotton stone pumice pierre ponce

Parker, Colorado, United States
Jan 30th

For your consideration is this lot of 2 Rottonstone Pumice H Behlen. One is 1/2 full and one is 3/4 full. See above for condition.

Freud 4" joiner machine model js 100 volts 115

Hialeah, Florida, United States
Jan 30th

Freud 4" Joiner Machine, Model JS 100, Volts 115Used but machine is working great.Case is included along with everything else seen inside case.

Plantation shutter louver stapler

Lockport, New York, United States
Jan 30th

MODEL LS-3

Plantation shutter louver driller

Lockport, New York, United States
Jan 30th

MODEL LD - 40 LOUVER DRILL

Moak shaper w/tooling

Naperville, Illinois, United States
Jan 30th

HELPING YOU BUY WITH CONFIDENCE 100% POSITIVE FEEDBACK SINCE 1999 ________________________________________________________________________________________________________________________________________

Hammond duskolector model (dk-855-b) dust collector w/silencer

Newark, Delaware, United States
Jan 30th

Katt german made professional shaper with italian rimini feeder

Newark, Delaware, United States
Jan 30th

Press for veneering raised panels. flat doors ,laminating

Ridgewood, New York, United States
Jan 30th

Cold Press Manual clamp. 4 ft by 8 ftUsed it to ensemble large doors Veneered ,flat and raised panel doors and panels .Laminating ply sheets together I am moving and no longer can use it at the new place .

Scmi t130p shaper

Fountain Valley, California, United States
Jan 30th

The SCMI T130P has a sliding tenoning table No tooling.230 Volts/ 3 phase 60 Hz 29.6 Amps 3450 RPM Spindle length: 7-5/8" Spindle diameter: 2" Table length: 97-3/4" Overall dimensions: 101" x 59" x 70"

Jet dc1100 1100cfm dust collector

Reedsburg, Wisconsin, United States
Jan 30th

1100 CFM Dust collector. This would make a great Christmas Present for that woodworker in your family. It will filter down to 30 micron particles and will keep the shop clean while preserving your precious lungs.

Powermatic 26 shaper quill nos

Monroe, Georgia, United States
Jan 30th

NOS Powermatic shaper quill..this unit has some light surface rust from setting in my shop for 20 years.....this has a 3/4 inch spindle..

Dust collector disa 040-315-cws 15hp, 3phase, 5,000cfm, reverse air cleaning

Neligh, Nebraska, United States
Jan 30th

Disa dust collector, 5,000 cfm, 15hp 3 phase baghouse collector. 2001 year. Has reverse air cleaning fan and enclosures for outdoor use (shown disassembled in picture).

Edgebander holzher 1436 se pvc primus with corner rounding sn 1075/9-704

Neligh, Nebraska, United States
Jan 30th

Holzher 1436 SE PVC Primus with corner rounding. 1997 year, 3 phase, 5/16" capacity, cartridge glue station, top and bottom flush trim and profiling, scrapers, end buffing unit. New frequency drive, rebuilt PLC, needs more work.

How to make a wood shaper for your workshop shape wood carpentry wood working

Port Alberni, British Columbia, Canada
Jan 30th

var itemNumber = window.ebayItemID ?