Other Woodworking Equipment & Machines (Woodworking Equipment & Machines) for sale, page 210

Berrien Springs, Michigan, United States
Jan 30th

Pulley in good shape was on a 3450 RPM motor with a 3/4" shaft

Lot 4 stepper motors lathe, 1.1 amp diy cnc router 103-775-7241 sanyo denki new

Springfield, Tennessee, United States
Jan 30th

2022UD6G.3.36 New Sanyo Denki, Ball Bearing, 1.1 Amp, 1.8 Degree Step (200 Steps per Revolution), Stepper / Stepping Motors, Part Number 103-775-7241. Each bid quantity is for a Lot of Four (4) Motors. You may bid / buy any number of lots, up to the total quantity available above.

Pinske cove router system

Huddleston, Virginia, United States
Jan 30th

This is a 3 1/4 HP Porter Cable Router with Bit (#43697). The Bit cuts a 3/8" radius and has a 1/2" shank. Router is in very good condition and has many hours of work left init.

Quatro air technologies dust collector, model dc2001-4

Fort Myers, Florida, United States
Jan 30th

Used- Quatro Air Technologies Dust Collector, Model DC2001-4, Carbon Steel. Airflow 360 cfm, dual station. Includes a 1/3 hp, 1/115/230 volt, 3450 rpm motor.

Diehl sl-55 glue line capable straight line rip saw

Naperville, Illinois, United States
Jan 30th

HELPING YOU BUY WITH CONFIDENCE 100% POSITIVE FEEDBACK SINCE 1999 ________________________________________________________________________________________________________________________________________

Pnuemafil dust collector, model 11.5-312-12

Toledo, Washington, United States
Jan 30th

Used Pneumafil dust collector (312) 12 ft. filter bags Approximately 47,000CFM @ 17 SP. Fan CFM and SP is only an estimate, buyer would need to verify fan CFM and SP Approximately 4680 sq ft of cloth The model number should would be 11.5-312-12 Serial # 1279 Job # 6-18273 Siemens 200HP Twin City fan serial# 98-138441-1-1

Murphy rodgers dust collector, model 1714

Toledo, Washington, United States
Jan 30th

Murphy Rodgers dust collector used 33EA) @ 16? SP.Fan CFM and SP is only an estimate, buyer would need to verify fan CFM and SP, 3739 sqft. of cloth filter area Dust collector includes; 125HP main fan with 34 inch inlet model # MR-33EA serial # 1010 Airlock Electrical panels Starters with 125HP soft start starter Clarkes Spark detection and abort gate Two 27 yard roll off dumpsters enclosed with roofs to transfer your saw dust into.

Fabric filters dust collector model 36-10-br-c

Toledo, Washington, United States
Jan 30th

Fabric Filters Northwest Dust Collector Used Fabric Filters Air Systems/ Filter Technology dust collector Model #36-10-BR-C Serial# 4440 Pulse Jet cleaning Phelps 25HP fan pull through 36 bags 10 ft long approximately 5 inch diameter filter bags approximately 472 sq.ft. cloth area inlet pipe size on bag house is 15 inch airlock/ feeder has a metal wheel walk in filter bag access with ladder and platform prior use was collecting sawdust removed form service Sept.

Wing extensions only jet 22-44 drum sander not included

Bellaire, Texas, United States
Jan 30th

Selling the wing extensions only. Sander not included. Extensions work fine.

New oneida dust duputy cyclone dust collector

Zeeland, Michigan, United States
Jan 30th

Oneida Molded DIY Dust Deputy Cyclone Dust Collector Tired of using your shop vacuum and getting poor results? Oneidas Dust Deputy will transform your shop vacuum and the way you work! Trap dust in a barrel and NOT in your shop vacuum.

Joos junior hot press (high output model 8.9kw)

Naperville, Illinois, United States
Jan 30th

HELPING YOU BUY WITH CONFIDENCE 100% POSITIVE FEEDBACK SINCE 1999 ________________________________________________________________________________________________________________________________________

Dust collector bag

Stafford, Virginia, United States
Jan 30th

Black and Decker 1M Top D-Bag 2HP. P/N 5140042-95. This bag has never been used and is in excellent condition.

60" uv bulb for super fichi

Arcadia, California, United States
Jan 30th

6 bulbs available

Kreg pocket hole jig system + self tapping pocket screws

Ladson, South Carolina, United States
Jan 30th

Used Kreg's Jig set with case of screws. Very good condition. Used a couple times only.

Walker turner 16" bandsaw gear reducer from model # 3331 gear box speed reducer

Sturgis, Michigan, United States
Jan 30th

ITEM: For sale is the speed reducer and arbor/drive shaft assembly for a pre-1956 Walker Turner 16" bandsaw, model No. 3331. All bearings, bushings, and other parts are original and were removed in the last 24hrs of this posting.

Holzher edgebander edge bander

Dallas, Texas, United States
Jan 30th

Used 1997 Holzher Perfect 1424K edgebander, the glue station in this unit need to be rebuild, Everything else in working order, still under power so you can come by to check it out. the price is $3,500 but i will take a best offer. Free local pick up or buyer arrange for shipping.

2012 scm / superfici 1600 mm ultraviolet roll coat finish - flat line 63" cap.

Seattle, Washington, United States
Jan 30th

2012 SCM / SUPERFICI 1600 mm UV Roll Coat Finish Line - 63" Width Cap. Pos. 1 - SUPERFICI infeed Belt Conveyor (Type TT1) - 79" L x 63" W.

2012 superfici valtorta laccabord ultraviolet edge coat / roll coat machine.

Seattle, Washington, United States
Jan 30th

2012 SCM / SUPERFICI VALTORTA LACCABORD UV Roll Coat - Edge Coating Machine. - Siemens PLC

Woodstock d4260 blast gate holder

Olathe, Kansas, United States
Jan 30th

D4260 Woodstock Blast Gate Holder Mount 2-1/2" to 6" blast gates to any solid surface. Provides blast gate stability for ease of use. Simple blast gate attachment.

Woodstock d4250 4" x 2" reducer

Olathe, Kansas, United States
Jan 30th

D4250 Woodstock 4" x 2" ReducerThese Reducers allow you to connect 4" hose to 2" hose. They feature a tapered transition for maximum efficiency. Heavy wall thickness stands up to hose-clamp pressure.