Other Woodworking Equipment & Machines (Woodworking Equipment & Machines) for sale, page 22

Powermatic pm1900tx-ck3 dust collector 3hp 3ph 230/460-volt 2-micron canister ki

Denver, Colorado, United States
Jul 27th

Shop w1686 1 hp oscillating spindle sander

Denver, Colorado, United States
Jul 27th

Vintage heavy duty steel motor pulley 7 od 5/8" id

Cape Neddick, Maine, United States
Jul 27th

I just pulled this off a old Delta Rockwell 6" jointer. It's very heavy duty. The removable center is tightened on the the motor shaft by the tightening of the large nut.

Oneida molded diy dust deputy cyclone

Rego Park, New York, United States
Jul 27th

NEW Oneida Molded DIY Dust Deputy Cyclone - 149952 by Oneida Air Systems Silicone and Screw are not included in the box. Tired of using your shop vacuum and getting poor results? Oneidas Dust Deputy will transform your shop vacuum and the way you work!

10 " delta radial arm saw great condition woodworkers dream

Front Royal, Virginia, United States
Jul 27th

(1) Used 10 " Delta Radial Arm Saw Serial Number:424-12-754-0001 Specifications: Capacity - Blade Diameter 10" Arbor Diameter 5/8" Working Height - Approximately 34" Power Stroke - Pneumatic Cylinder 6.50" Start & Stop Push Button Mounted on Front of Machine Pictures Taken In Limited Work Space - In Excellent Previously Owned Condition. Very Little Ware From Usage. Motor 1 1/2 Hp , 3450 RPM, 120-240 V, Amp 13.0/6.5 Lightly Used In Very Good Condition.

Canelback drill press

Opa-Locka, Florida, United States
Jul 27th

Canelback Drill Press.

Sullair 5500 screw compressor - very low hours - 5509 with air dryer and tank

Donalds, South Carolina, United States
Jul 27th

This was installed in a facility a short while before the plant shut down permanently. This comes with the dryer as well a tank for a full install. Shipping is not included but can be discussed for additional cost.

Wood work shop air filter system remote control ceiling mount dust collector new

Salt Lake City, Utah, United States
Jul 27th

Wood Work Shop Air Filter System Remote Control Ceiling Mount Dust Collector New Product Information

Unique aluminum guide plate 16 1/2" x 4 3/4" angled grooves slots holes 10 oz.

Troy, Maine, United States
Jul 27th

Unique Aluminum Guide Base Plate of some sort. It measures 16 1/2" x 4 3/4" and has multi-angled grooves, holes and slots. Unsure for what it's intended but I'm betting you do.

Walker turner upright bandsaw: 15”, 1 hp |010-3630775

Wallkill, New York, United States
Jul 27th

WALKER TURNER UPRIGHT BANDSAW: 15”, 1 hp |010-3630775

Vintage ,buffalo blacksmith forge

Mount Ayr, Iowa, United States
Jul 27th

This is a cool old forge. Pretty much original, it does have some modern bolts installed and a couple of repairs that look like they were cracks but are solid. I bought this missing the handle on the blower.

Morso miter chopper guillotine dk8900 for picture framing with manual

Kissimmee, Florida, United States
Jul 27th

DK8900 Morso Miter Chopper Guillotine Cutter with extension bed and additional pair of blades. Smooth foot operated action and fully functioning. Has surface rust from storage and all blades need sharpening.

3000/3200mm high quality new sliding table saw in charlotte nc usa

Matthews, North Carolina, United States
Jul 26th

Suitable for cutting density board, polished board,artificial board, ABS board, PVC board, etc. Special design on plate seat,precise and stable, sliding table multi-point locking. Crosscut fence V groovedesign, add thrust ball bearing to the stopper, firm lock and easy swing.Spindle run-out controlled within 0.01mm.

Larick 410s shaper sander

Ridgeland, South Carolina, United States
Jul 26th

Designed and manufactured to give years of dependable service, the Larick 410 will shape and sand a wide variety of workpieces. The user friendly design and small footprint makes setup and profile changeovers quick and easy. This machine has one shape head and two sanding heads.

Impeller for a harbor freight dust collector

Ooltewah, Tennessee, United States
Jul 26th

Impeller for Harbor Freight Dust CollectorThis impeller is in "like new" condition and was removed from a working HF unit. It has no flaws whatsoever. Email me with any questions that you may have.

Porter cable 121 variable speed oscillating spindle sander

Kalamazoo, Michigan, United States
Jul 26th

Porter Cable 121 Variable Speed Oscillating Spindle Sander. This sander is in good working condition. It was used as a table mounted sander(with included Rockler mounting plate) in a hobby woodworking shop.