Other Woodworking Equipment & Tools (Woodworking Equipment & Tools) for sale, page 57

Delta drill press hub and pinion shaft for quill

Clermont, Georgia, United States
Jun 20th

TAKE OFF HUB AND PINION SHAFT FROM DELTA DRILL PRESS, APPEARS UNUSED, 1.25" DIA, EMAIL IF YOU NEED FURTHER DIMENSIONS 013-011-04-9-6025 PLEASE READ BEFORE BIDDING: Contact me for correct freight rates as the calculator may be incorrect

Delta 52-702 lvc motor starter contactor 3ph low voltage control 500-84-102-0073

Clermont, Georgia, United States
Jun 20th

TAKE OFF CONTROL FROM FLOOR MODEL DELTA MACHINE. APPEARS UNUSED. USED WITH THE MACHINES BELOW.

Delta 31-250 31-252 31-255x drum sander motor 120v 1ph 1-1/2hp 3450 rpm 911901

Clermont, Georgia, United States
Jun 20th

TAKE OFF MOTOR REMOVED FROM FLOOR MODEL DELTA DRUM SANDER. APPEARS UNUSED. TESTED, RUNS FINE, 120VAC 1.5HP 3450 RPM 15A NOTE THIS HAS SCRATCHES ON THE FAN COVER AND DOES NOT HAVE A FAN- IT WAS REMOVED FOR ANOTHER MACHINE.

Delta power tool motor 120v 1ph 202303 ks1720914

Clermont, Georgia, United States
Jun 20th

MOTOR FROM UNKNOWN DELTA STATIONARY POWER TOOL. TESTED, RUNS FINE, 120VAC 013-011-04-9-6025 PLEASE READ BEFORE BIDDING: Contact me for correct freight rates as the calculator may be incorrect EBAY STORE NAME:

Snappy tapered drill countersink set (3 pc.)

Belleville, Wisconsin, United States
Jun 20th

This is Snappy no. 40040. This is a 3 piece set of tapered countersinks.

Snappy 3 pc. hinge bit set

Belleville, Wisconsin, United States
Jun 20th

This is Snappy no. 45300. This kit contains the three most popular sizes for self centering hinge bits, 5/64", 7/64", and 9/64".

Snappy quick change chuck w/hex shank

Belleville, Wisconsin, United States
Jun 20th

Our quick change chuck embodies American-made industrial quality bits, guaranteed to last. It is compatible with both keyed and keyless chuck, fitting into all standard off-the-shelf 1/4" hex shaft bits and drivers due to its knurled sleeve. Kindly wait for our invoice before payment if you purchase multiple items that are not prepaid.

Molding cutter, 3pc, bead and quarter round

Belleville, Wisconsin, United States
Jun 20th

This is item #CC03MC. This is a steel 3 piece cutter set for table saw molding heads. This one cuts two different radius round overs, 3/8" and .190, and a .120 radius bead.

Jet/performax 22/44 sander oilite washers

Belleville, Wisconsin, United States
Jun 20th

This is Jet # 50-3090-01 for the Jet/Performax 22/44 sanders. These are the oilite washers used between the motor mounting plate and the main casting. These let the motor assembly slide up and down.

Delta 14" bandsaw door knob, see list for application

Belleville, Wisconsin, United States
Jun 20th

This is the front door knob for the following 14" Delta bandsaws: 28-141 type 1, 28-208 type 1, 28-209 type 1, 28-216 type 1, 28-231 type 1, 28-241 type 1, 28-243 type 1, 28-245 type 1, 28-248 type 1, 28-248F type1, 28-248G type 1, 28-254 type 1, 28-255 type 1, 28-262 type 1, 28-263 type 1, 28-269 type 1, 28-270 type 1, 28-275 type 1, 28-278 type 1, 28-280 type 1, 28-283 type 1, 28-293 type 1, 28-299 type 1 28-299A type 1, 28-303 type 1, 28-306 type 1. These have been discontinued by Delta.

The veneering book by david shath square

Belleville, Wisconsin, United States
Jun 20th

Veneering provides the means of using beautiful figured woods at a fraction of the cost of solid wood. It also allows woodworkers to use more stable substrates such as plywood and MDF and still achieve beautiful effects. While this book covers the basics of a variety of veneering techniques, including traditional methods, the heart of the book is a thorough introduction to vacuum veneering and practical advice on how small shop woodworkers can use veneering and lammination in their woodworking.

Woodturning design by derek hayes

Belleville, Wisconsin, United States
Jun 20th

Derek Hayes investigates the process and practice of design in woodturning. Design is rarely a priority for the beginner woodturner and most turners in their early work begin by concentrating on technique rather than shape or form, which can prove counterproductive. While aiming to instill confidence in appreciating, criticizing, and selecting sources of inspiration, Derek doesn't tell you what is good or bad, but rather questions why we may find one turning attractive and another unpleasant.

Lot of 3 fastcap stealth speed braces, black, 3-1/2" x 12" - hardware 9/16 holes

Athens, Georgia, United States
Jun 20th

Lot of 3 FastCap Stealth Speed Braces, Black, 3-1/2" x 12" - Hardware 9/16 Holes

Vintage delta shaper heavy duty steel cutter head no. 265 w 6 blades- pm-2553

Chapel Hill, North Carolina, United States
Jun 20th

A Heavy Duty Steel Cutter Head By Delta Milwaukee. It is a model 265 based on the patent number (1830813) from about 1950.It has a 4 7/8" Diameter body with a 5/8" Arbor hole. Comes with 6 sets of cutter blades.

Shaper cutter

Niles, Ohio, United States
Jun 20th

You are looking to buy a shaper cutter. This looks to be in good shape, the hole for the shaft is .50 inch as you can see by the pictures.

Manual hand grinder

Bedford, Texas, United States
Jun 19th

Grinding is easy, fast, and a necessary skill to have for any woodworker. With hand-cranked grinders, you can work as fast or slowly as you want. They can also accept modern grinding wheels.

Shopsmith mark v planer, speed increaser and decreaser clamps

Concord, North Carolina, United States
Jun 19th

Shopsmith Mark V Planer, Speed Increaser and Decreaser Clamps. Excellent condition with a couple small scratches. Item #'s 516146, 513356, 51335601.

Shopsmith mark v lathe tailstock arbor

Concord, North Carolina, United States
Jun 19th

Shopsmith Tailstock Arbor. Allows for safety and presicion when center drilling while turning. The drill chuck and tailstock are to illustrate the usefulness of the item and only and not included in the sale.