+ Post new Ad

Other Workholding Tools

The average price for current category was $95.69 last month.

There are 3396 ads in this category.

STARRETT 937 WOOD 6"-12" MICROMETER CASE FOR STARRETT S436DZ MICROMETER SETS

Starrett 937 wood 6"-12" micrometer case for starrett s436dz micrometer sets

  • Niles, Michigan, United States
  • Aug 15th
LISTED IS A NEW OPEN BOX STARRETT 937 WOOD STORAGE BOX ONLY FOR STARRETT FOR 6" TO 12" S436DZ MICROMETER SETS. ALSO HAS ROOM FOR 5" TO 11" STANDARDS.
UNIDENTIFIED BROWN & SHARPE 00 TOOLHOLDER (?)

Unidentified brown & sharpe 00 toolholder (?)

  • Belmont, Massachusetts, United States
  • Aug 15th
UNIDENTIFIED BROWN & SHARPE 00 TOOLHOLDER (?)
Watchmakers / Jewelers Collet Storage Tray Holder

Watchmakers / jewelers collet storage tray holder

  • Prospect Heights, Illinois, United States
  • Aug 15th
Watchmakers / Jewelers Collet Storage Tray HolderCollets not included.
PIHER CLAMP MAXI R-30 CM. /12" CAPACITY 61030 - 1 Each

Piher clamp maxi r-30 cm. /12" capacity 61030 - 1 each

  • Hibbing, Minnesota, United States
  • Aug 15th
Piher® Maxipress R Piston Clamps Rolled spring steel bar provides maximum pressure held throughout the whole job. Fixed jaw surface is grooved to achieve maximum grip. Spring activated back brake keeps moving jaw firmly in position.
PIHER CLAMP MAXI R-120 CM./48" CAPACITY 61120 - 1 Each

Piher clamp maxi r-120 cm./48" capacity 61120 - 1 each

  • Hibbing, Minnesota, United States
  • Aug 15th
Piher® Maxipress R Piston Clamps Rolled spring steel bar provides maximum pressure held throughout the whole job. Fixed jaw surface is grooved to achieve maximum grip. Spring activated back brake keeps moving jaw firmly in position.
PIHER CLAMP MAXI R-80 CM. /32" CAPACITY 61080 - 1 Each

Piher clamp maxi r-80 cm. /32" capacity 61080 - 1 each

  • Hibbing, Minnesota, United States
  • Aug 15th
Piher® Maxipress R Piston Clamps Rolled spring steel bar provides maximum pressure held throughout the whole job. Fixed jaw surface is grooved to achieve maximum grip. Spring activated back brake keeps moving jaw firmly in position.
PIHER CLAMP MAXI F-60 CM. /24" CAPACITY 60060 - 1 Each

Piher clamp maxi f-60 cm. /24" capacity 60060 - 1 each

  • Hibbing, Minnesota, United States
  • Aug 15th
Piher® Maxipress F Piston Clamps Rolled spring steel bar provides maximum pressure held throughout the whole job. Fixed jaw surface is grooved to achieve maximum grip. Spring activated back brake keeps moving jaw firmly in position.
PIHER CLAMP MAXI F-100 CM./40" CAPACITY 60100 - 1 Each

Piher clamp maxi f-100 cm./40" capacity 60100 - 1 each

  • Hibbing, Minnesota, United States
  • Aug 15th
Piher® Maxipress F Piston Clamps Rolled spring steel bar provides maximum pressure held throughout the whole job. Fixed jaw surface is grooved to achieve maximum grip. Spring activated back brake keeps moving jaw firmly in position.
PFERD 93218 Group 12 Collet - 1/2" - Retains 1/2" Diameter Shanks

Pferd 93218 group 12 collet - 1/2" - retains 1/2" diameter shanks

  • Buffalo Grove, Illinois, United States
  • Aug 15th
2-Prong Drives CENTER #2MT Woodturning Lathe Tool REMOVEABLE CENTER

2-prong drives center #2mt woodturning lathe tool removeable center

  • Towanda, Pennsylvania, United States
  • Aug 14th
2-Prong Drives CENTER #2MT Woodturning Lathe Tool REMOVEABLE CENTER REMOVEABLE CENTER - HEAVEY DUTY - will need allen wrench good condition - review the pictures - shows some wear and use GB3 - 3
5/8 threaded CENTER #2MT Woodturning Lathe Tool

5/8 threaded center #2mt woodturning lathe tool

  • Towanda, Pennsylvania, United States
  • Aug 14th
5/8 threaded CENTER #2MT Woodturning Lathe Tool good condition - review the pictures GB3 - 4
HENRY DISSTON 3" WARDING FILE 0 CUT , USA , LOT OF 4

Henry disston 3" warding file 0 cut , usa , lot of 4

  • Berlin, Connecticut, United States
  • Aug 14th
AS SHOWN
HENRY DISSTON & SONS , BENCH FILE , CANT, 2 CUT , 3-1/4" x 1/4" , LOT OF 3

Henry disston & sons , bench file , cant, 2 cut , 3-1/4" x 1/4" , lot of 3

  • Berlin, Connecticut, United States
  • Aug 14th
AS SHOWN
HENRY DISSTON & SONS ,BENCH FILE , AURIFORM, 00 CUT , 3-1/4" x 1/4" , LOT OF 3

Henry disston & sons ,bench file , auriform, 00 cut , 3-1/4" x 1/4" , lot of 3

  • Berlin, Connecticut, United States
  • Aug 14th
AS SHOWN
HENRY DISSTON & SONS ,BENCH FILE , PIPPIN , 00 CUT , 3-1/4" x 1/4" , LOT OF 3

Henry disston & sons ,bench file , pippin , 00 cut , 3-1/4" x 1/4" , lot of 3

  • Berlin, Connecticut, United States
  • Aug 14th
AS SHOWN
Spring loaded tap guide or tap follower  made in USA.

Spring loaded tap guide or tap follower  made in usa.

  • Newport, New Hampshire, United States
  • Aug 14th
Spring loaded tap guide made in the USA. These tap guides are made from T-416 Stainless steel and we also use a closed end ground spring that is also manufactured in the USA. The guide will fit in a 1/2 in chuck or collett.
Spring loaded tap guide or tap follower with two sided tip made in USA

Spring loaded tap guide or tap follower with two sided tip made in usa

  • Newport, New Hampshire, United States
  • Aug 14th
Spring loaded tap guide made in the USA. These tap guides are made from T-416 Stainless steel and we also use a closed end ground spring that are also manufactured in the USA. The tip on this tap follower is reversible one side is a point the other end has a cone cut into it.
OLDER S J SCULLY JONES QUICK CHUCK

Older s j scully jones quick chuck

  • Waterford, Michigan, United States
  • Aug 14th
TG100 COLLET EXTENSION W/2 COLLETS 1-1/4" DIA SHANK TG 100 LYNDEX KENNAMETAL

Tg100 collet extension w/2 collets 1-1/4" dia shank tg 100 lyndex kennametal

  • North Port, Florida, United States
  • Aug 14th
FREE SHIPPING IN USA LYNDEX TG100 COLLET EXTENSION WITH 1-1/4" DIA. SHANK WITH 2 TG100 COLLETS KENNAMETAL OR OTHERS
Samchully SH-10036SCDB Hydraulic Cylinder for Lathe Power Chuck

Samchully sh-10036scdb hydraulic cylinder for lathe power chuck

  • Grosse Pointe, Michigan, United States
  • Aug 14th
Samchully SH-10036SCDB Hydraulic Cylinder for Lathe Power Chuck.Doosan part number 400319-0024936 MM through holeM42 P 1.5 drawtube thread.Cylinder is almost new, was taken off a low hour Doosan machine and replaced with a special chuck package.Complete with everything in photos.

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies