pad driver for sale, brand-new and used.

Gunn Brush Co is listing this great 19" diameter floorpad driver, for driving floor pads on your 20" buffing machine.. New, from inventory.Fits on most 20" floor machines. Can be used for stripping, scrubbing, and floor polishing pads .

ELASTOMERIC RUBBER 5" PAD DRIVER CLARKE PART # 53534A FOR CLARKE MODEL SUPER E and V-5 EDGERS Instructions for replacing the pad, taken directly from the operator's manual:

17" MIGHTY-LOK GRIP FACE PAD DRIVER FOR BUFFERS, POLISHERS, SANDERS Standard clutch plate, referred to as an NP-9200, fits most 18" machines, including (as far as we know) all Clarke machines which have not been modif

GRIP FACE PAD DRIVER , 12" X 18" CLARKE PART # 39730A (previously 32519A) MADE FOR THE CLARKE OBS-18, OBS-18 DC ORBITAL SANDER With FREE shipping, this is the best price you will find. You may find it online for a lower price, but that is before shipping is added.

Shows very light signs of use, remains in Very Good condition. Plate is molded of a heavy duty resin plastic type material. No makers mark or brand is apparent.

HOOK-AND-LOOP SANDING PAD FOR CLARKE CE7, SE7 EDGERS Self-adhesive; easy to mount to the metal disc. TIP: Removing the entire assembly and immersing in boiling water will likely make the removal of the old pad much easier.

Gunn Brush Co presents a great 12" diameter floorpad driver, for driving floor pads . Fits on most 12" and 13" floor buffing machines. Can be used for driving all types of pads :stripping, scrubbing, and floor polishing pads .

Malish plastic block nylon pad driver assembly. 14" diameter Fits most Clarke auto scrubbers that require 14" pad drivers. Brand new in box.

12 INCH WOOD FLOOR BUFFER PAD DRIVER WITH MOUNTING PLATE INSIDE DIAMETER OF MOUNTING PLATE MEASURES 3 INCHES AND THE 3 TAB CUTOUTS ARE 3/8 INCH DEEP IT MEASURES 3 1/4 INCHES THICK UNKNOWN AGE OR MANUFACTURER DONT FORGET TO CHECK OUT MY STORE AND OTHER GREAT ITEMS On Aug-08-12 at 13:52:57 PDT, seller added the following information:

Gunn Brush Co. Inc. is offering a great 16" diameter floorpad driver, for driving floor pads .Brand new, from our inventory.

List is for 1- ECONOMICAL PAD DRIVER 19 " Specs above

List is for 1- MALISH PAD DRIVER 20 " Specs above

List is for PAS 961 CH TACONY. pad Driver #200020 16" 3-15/16 " Afraid I have little info on this pad driver . just what is on the box -label .

15" DRIVE BRUSH (fits 17" Floor Machine) B702336 Polypropylene bristles holds synthetic floor maintenance pads in a fixed position. What size Brush do I order for my floor machine? The key to ordering a brush is the block diameter relative to the machine size

This is a like new pad driver. It came off an NSS battery burnisher with less than 50 hours.

Made by The Braun Brush Co. molded 6.12 nylon teeth and threaded center locking device hold pads evenly and securely. EZ Rider facing is permanently attached to a lacquered plywood backing, 1 1/4" riser is included.