Pad Printing Photosensitive Polymer Plates 10pcs,water Washable

US $90.00

Hong Kong, Hong Kong
Jan 30th

Open on mobile:
QR code

Photo-sensitive Polymer Plate for our sealed ink cup pad printing machine - Water Washable, 10pcs (Plate size: 100x214mm/piece ) Thickness:0.43mm Relief depth:0.21mm Hardness:67 degree Base material: metal (10 pieces in one pack) Specially designed for our sealed ink cup pad printer machine. Advantages: 1: Water washable . No solvent used!! Environment friendly ) 2: High durability . Allows printing very fine lines and big solid lines together, by using 300 lpi screen available. 3: High Reproductivity . Cost Effective. Our high quality polymer cliches are water washable and therefore no chemicals are used when etching. This makes them highly suitable for home or office use, without any of the dangers associated with chemicals. Pad Printing Polymer Plate Making Process 1.Contact with Positive film Remove cover film slowly and place positive film onto undeveloped plate.Keep the positive film contact with the plate tightly. Use positive film having optical density of not less than 3.0. 2.Exposure Put the plate covered with film on the glass of the UV exposing machine. Expose plate, through positive film, to UV light having 360 nm wave lengths for 1-2 minutes. 3.Wash-out Remove positive film. Wash-out exposed plate with water, at 15-25 degree for 1-2 minutes. You can use a sponge roll or very soft brush. If wash out unit is not available, you can wash it out with running tap water. 4.Drying Dry the plate in a hot-air dryer after removing the surface water by sponge roll(or soft brush) at 50-70 degree for 5-10 minutes. 5.Post exposure Expose the dried plate to UV light again for 15-20 minutes in order to get stability.After post-exposing, the plate will become hard enough to be suitable for printing. General Hints: Gloss film as well as matted film can be used. Good contact between film and plate is essential. Treat films carefully as any kink will be reproduced on the developed plate. Check film and plate without any dust before exposure. Minimize the pressure of doctor blade to enjoy longer durability of plate. It can be used in inkwell system and closed ink cup system. inkfrog terapeak i000000 inkFrog Analytics